Velocity field measurement of a round jet using quantitative schlieren

This paper utilizes the background oriented schlieren (BOS) technique to measure the velocity field of a variable density round jet. The density field of the jet is computed based on the light deflection created during the passage of light through the understudy jet. The deflection vector estimation was carried out using phase-based optical flow algorithms. The density field is further exploited to extract the axial and radial velocity vectors with the aid of continuity and energy equations. The experiment is conducted at six different jet-exit temperature values. Additional turbulence parameters, such as velocity variance and power spectral density of the vector field, are also computed. Finally, the measured velocity parameters are compared with the hot wire anemometer measurements and their correlation is displayed.     

Energy requirement of ultraviolet and AOPs for the post-treatment of treated combined industrial effluent

Post-treatment was carried out to eliminate the colour and COD of treated combined industrial effluent. Ozonation at a dose of 300 mg/h for 10 min resulted in 100% colour and 96% COD removal at pH 8 and temperature 25 °C. The application of UV/H₂O₂ resulted in 91% colour and 82% COD removal. 79% colour and 60% COD removal was obtained with the Fenton process after 60-min treatment in the presence of 170 mg/l H₂O₂, while the photo-Fenton process showed an almost complete elimination of both parameters. Electrical energy consumption showed that the photo-Fenton resulted in the highest removal efficiency with 95% removal in terms of colour and COD abatement rates. The electrical energy requirements of the tested processes followed the increasing order UV/Fe/H₂O₂ < O₃ < UV/H₂O₂ < UV.     

Semi- and fully interpenetrating polymer networks based on polyurethane–polyacrylate systems. III. Polyurethane–poly(methyl acrylate) semi-2-interpenetrating polymer networks

Two series of semi-2-IPNs based on a polyurethane and a poly(methyl acrylate) crosslinked with divinyl benzene were prepared and investigated using dynamic mechanical analysis, sonic velocity measurements, and electron microscopy. In the one series, the level of crosslinking was varied to give ultratight networks. In the other, the composition was altered, but the amount of the crosslinking agent used was kept constant. For the first series, it was concluded that the degree of crosslinking had a significant influence on the morphology and properties by controlling the amount of enforced mixing. The dynamic mechanical data for the second series fitted the Davies modulus–composition equation, indicating that both phases are continuous.     

Cardenolides from the methanolic extract of Nerium oleander leaves possessing central nervous system depressant activity in mice

OBJECTIVE: To identify characteristics associated with provision of bystander CPR in witnessed out-of-hospital cardiac arrest cases. METHODS: An observational, prospective, cohort study was performed using cardiac arrest cases as identified by emergency medical services (EMS) agencies in Oakland County. MI, from July 1, 1989, to December 31, 1993. All patients who sustained a witnessed arrest prior to arrival of EMS personnel were reviewed. RESULTS: Of the 927 patients meeting entry criteria, the 229 patients receiving bystander CPR were younger: 60.9 +/- 14.7 vs 67.9 +/- 14.7 years (p < 0.01). Most (76.6%) cardiac arrests occurred in the home. In a multivariate logistic model, only the location of arrest outside the home was a significant predictor of receiving bystander CPR [odds ratio (OR) 3.8; 99% CI 2.5, 5.9]. Arrests outside the home were associated with significantly improved outcome, with 18.2% of out-of-home and 8.2% of in-home victims discharged from the hospital alive (OR 2.5; 99% CI 1.4, 4.4). CONCLUSION: Patients who have had witnessed cardiac arrests outside the home are nearly 4 times more likely to receive bystander CPR, and are twice as likely to survive. This observation emphasizes the need for CPR training of family members in the authors' locale. This phenomenon may also represent a significant confounder in studies of out-of-hospital cardiac arrest and resuscitation.     

Some aspects of the thermal stability of poly(alkyl itaconic acid esters)

The thermal stability of members of several series of polyitaconates has been assessed using thermogravimetric and thermal volatilisation techniques. From these data general degradation patterns have been established. The poly (di-n-alkyl itaconates) are stable up to 570K before chain breakdown occurs. The poly(mono-n-alkyl itaconates) are less stable and undergo a dehydration/de-esterification reaction at 430K which results in the formation of anhydride structures. This reaction can be suppressed by the formation of the salts. In the copolymers, salt formation also leads to increased stability but the range of copolymers studied was too restricted to draw general conclusions about their thermal behaviour.     

Linear Programming Analysis of a Water Supply System with Multiple Supply Points

An optimum water distribution system is designed using linear programming. The proposed algorithm, developed by applying an analogy of electrical network theory, discusses a distribution system with multiple supply points in comparison to an earlier paper by Gupta where the distribution system was restricted to only one source. The electrical network analogy is fully explained and a case example with two sources of supply is solved.     

Deformation behavior of isotactic polypropylene crystallized via a mesophase

The mechanical behavior of semicrystalline isotactic polypropylene (iPP) of different crystallinity, crystal morphology and superstructure was investigated by standard tensile stress–strain analysis, dynamic-mechanical analysis, and in situ observation of the deformation by atomic force microscopy (AFM). Emphasis is put on the comparison of the mechanical characteristics of specimens containing either non-isometric lamellae, being arranged in spherulites, or nodular isometric domains, which are not organized in a superstructure. The formation of lamellae/spherulites and of nodules was controlled by the conditions of crystallization. The replacement of cross-hatched monoclinic lamellae and a spherulitic superstructure by randomly arranged isometric nodules leads to a distinct increase of the ductility and toughness, even if the crystallinity is identical. The modulus of elasticity and the yield stress increase as expected with increasing crystallinity. Slightly lower values of Young’s modulus and yield strength are detected if samples contained non-lamellar crystals in a non-spherulitic superstructure, proving an effect of the crystal shape on the deformation behavior. For the first time, tensile deformation of semicrystalline iPP which contains nodular ordered domains instead of lamellae has been followed by in situ AFM.     

Potential controlled anion absorption in a novel high surface area composite of Cladophora cellulose and polypyrrole

The electrochemical properties of a novel composite paper material of high surface area consisting of polypyrrole (PPy) deposited on cellulose derived from Cladophora sp. algae have been investigated in electrolytes containing different concentrations of nitrate, chloride and p-toluene sulfonate, as well as in solutions containing both p-toluene sulfonate and chloride. The oxidation mechanism and the dependence of the oxidation behavior of the polypyrrole, which was obtained by oxidation of pyrrole with iron(III) chloride, on the anion type and concentration have been studied. Current nucleation maxima, appearing at different times depending on the anion concentration, were obtained during the oxidation of the reduced polymers as a result of the combined action of the formation and growth of conducting polymer strands and anion diffusion. No loss of capacity was seen during repeated oxidation and reduction of the polymer indicating that trapping of anions in the reduced polymer did not limit the electroactivity of the present material. The latter can be explained by the thin polymer layer present on the cellulose substrate. During the oxidation of the polymer, the anions most likely first cover most of the surface of the composite before diffusing into the bulk of the polymer. The estimated distance between these surface sites was also found to match the size of the anions. For electrolytes containing a mixture of anions, the oxidation charge depends on the concentration and size of the different anions.The combination of the thin polymer coating and the large specific surface area of the composite give rise to a high ion absorption capacity even for large anions. Hence, the investigated material should be well-suited for use in biotechnological applications involving, e.g., desalting and extraction of proteins and DNA from biological samples.     

Thermal depolarization and electromechanical hardening in Zn2+-doped Na1/2Bi1/2TiO3-BaTiO3

Na_1/2Bi_1/2TiO₃-based materials have been earmarked for one of the first large-volume applications of lead-free piezoceramics in high-power ultrasonics. Zn²⁺-doping is demonstrated as a viable route to enhance the thermal depolarization temperature and electromechanically harden (1-y)Na_1/2Bi_1/2TiO₃-yBaTiO₃ (NBT100yBT) with a maximum achievable operating temperature of 150 °C and mechanical quality factor of 627 for 1 mole % Zn²⁺-doped NBT6BT. Although quenching from sintering temperatures has been recently touted to enhance T_F-R, with quenching the doped compositions featuring an additional increase in T_F-R by 17 °C, it exhibits negligible effect on the electromechanical properties. The effect is rationalized considering the missing influence on conductivity and therefore, negligible changes in the defect chemistry upon quenching. High-resolution diffraction indicates that Zn²⁺-doped samples favor the tetragonal phase with enhanced lattice distortion, further corroborated by ²³Na Nuclear Magnetic Resonance investigations.     

Quality assurance and quality control of subgrade compaction using the dynamic cone penetrometer

The Dynamic Cone Penetrometer (DCP) is a device that is used in the construction industry for the assessment of in situ soil compaction quality. Over the past few decades, numerous correlations have been developed between the DCP test results and soil strength and stiffness parameters. This paper proposes a comprehensive set of criteria and recommendations for quality control (QC) of compacted subgrade that take into account the inherent statistical variability of DCP test results. For the development of the QC criteria, a new statistical methodology is used to extract representative test values from the raw field DCP test data. In order to use the proposed QC criteria, soils are first classified into two broad categories (fine-grained and coarse-grained) depending on their fabric and response to compaction efforts. Test results indicate that (i) for fine-grained soils, the DCP test values have good correlation with the plasticity index (PI), which is indicative of the type and amount of clay content of the soil and (ii) for coarse-grained soils, the DCP test values have good correlation with the optimum water content of the soil, which is directly related to its in situ density. DCP blow count correlation equations are presented for both soil categories. Recommendations for field DCP testing and data analysis are also provided to highlight the significance of the statistical distribution of the DCP test results in QC testing of compacted subgrade.