Parallel electron energy-loss spectroscopy free from gain variation

A new method is presented for removing the effect of the gain variation of parallel detectors used for the quantitation of trace elements with electron energy loss spectroscopy (EELS). Use of the ratio of two first-difference spectra eliminates the effect of gain variation of the detector, therefore eliminating the need for gain normalization and dark current subtraction. This method is particularly suitable for revealing small signals superimposed on a large background, a typical scenario for trace element quantitation of both biological and inorganic materials. This method has been tested on a system with a cooled CCD camera as the parallel detector and illustrated by the analysis of low concentration Ca in an organic matrix. The method is expected to be generally applicable to spectral analysis affected by gain variations of parallel detectors.     

An order-picking operations system for managing the batching activities in a warehouse

Nowadays, customer orders with high product variety in small quantities are often received and requested for timely delivery. However, the order-picking process is a labour-intensive and costly activity to handle those small orders separately. In such cases, small orders are often grouped into batches so that two or more orders can be served at once to increase the picking efficiency and thus reduce the travel distance. In this paper, an order-picking operations system (OPOS) is proposed to assist the formulation of an order-picking plan and batch-handling sequence. The study integrates a mathematical model and fuzzy logic technique to divide the receiving orders into batches and prioritise the batch-handling sequence for picking, respectively. Through the proposed system, the order-picking process can be managed as batches with common picking locations to minimise the travel distance, and the batch-picking sequence can be determined as well. To demonstrate the use of the system, a case study in a third-party logistics warehouse is presented, and the result shows that both the order-picking activity and labour utilisation can be better organised.     

Experimental investigation of water droplet–air flow interaction in a non-reacting PEM fuel cell channel

It has been well documented that water production in PEM fuel cells occurs in discrete locations, resulting in the formation and growth of discrete droplets on the gas diffusion layer (GDL) surface within the gas flow channels (GFCs). This research uses a simulated fuel cell GFC with three transparent walls in conjunction with a high speed fluorescence photometry system to capture videos of dynamically deforming droplets. Such videos clearly show that the droplets undergo oscillatory deformation patterns. Although many authors have previously investigated the air flow induced droplet detachment, none of them have studied these oscillatory modes. The novelty of this work is to process and analyze the recorded videos to gather information on the droplets induced oscillation. Plots are formulated to indicate the dominant horizontal and vertical deformation frequency components over the range of sizes of droplets from formation to detachment. The system is also used to characterize droplet detachment size at a variety of channel air velocities. A simplified model to explain the droplet oscillation mechanism is provided as well.     

Flexural ductility of high-strength concrete columns with minimal confinement

The use of high-strength concrete (HSC) instead of normal-strength concrete (NSC) in columns has the advantage of allowing the column size to be reduced and is thus becoming popular. However, since HSC is more brittle than NSC, its use could result in undesirable brittle failure. To evaluate the ductility of columns, nonlinear moment–curvature analysis taking into account the stress-path dependence of the steel reinforcement is required. Based on such analysis, a parametric study has been conducted to investigate the effects of various factors on the ductility of columns. The results revealed that the effect of concrete strength is dependent on the axial stress level (axial load to area ratio) and axial load level (axial load to capacity ratio). At the same axial stress level, the use of HSC has little or basically no adverse effect on the ductility but if the same axial load level is maintained to reduce the column size, the use of HSC would significantly reduce the ductility. Finally, two formulas for direct evaluation of the ductility of columns are developed.     

Transmission and scanning electron microscope study on the secondary cyclic hardening behavior of interstitial-free steel

Strain controlled fatigue experiment was employed to evaluate automotive grade interstitial-free ferrite steel. Hundreds of grains were examined by scanning electron microscope under electron channeling contrast image technique of backscattered electron image mode for comprehensive comparison of micrographs with those taken under transmission electron microscope. The cyclic stress responses clearly revealed that rapid hardening occurs at the early stage of cycling as a result of multiplication of dislocations to develop loop patches, dipolar walls and dislocation cells at various total strain amplitudes. After primary rapid hardening, stress responses varied from being saturated to further hardening according to dislocation structure evolution at various strain amplitudes. The fatigue failure was always accompanied with further hardening including secondary hardening. The corresponding dislocation structures with the three types of hardening behaviors are discussed. Once the secondary hardening starts, dislocation cells began to develop along grain boundaries in the low strain region and then extended into grain interiors as strain amplitudes increased and cycling went on. The secondary hardening rates were found to be directly proportional to their strain amplitudes.     

The designs of a scalable optical packet switching architecture

Abstract

This paper proposes a new switching architecture to be used in all optical packet switching networks. The proposed switch is derived from an original 2 × ?2 two‐stage multi‐buffer switched delay line based optical switching node, known as an M‐Quadro node. By incorporating bypass lines into the M‐Quadro architecture and employing a novel switch control strategy, the optical packet switching node can effectively resolve packet contentions, thus reducing the packet deflection probability substantially. Furthermore, we show that such architecture is scalable for a generic multiple stages optical packet switch with a larger number of input/output ports.     

Controllable formation of ionic liquid micro- and nanoparticles via a melt-emulsion-quench approach

We present a facile, scalable, and general method for the size-variable generation of monodispersed, near-spherical solid-state (frozen) ionic liquid nanoparticles based on a novel melt-emulsion-quench approach. Simple manipulation of the internal templating droplets within oil-in-water (o/w) microemulsions also permits the formation of well-defined microspheres. This simple and rapid preparation, requiring neither specialized equipment nor harsh conditions, suggests a wealth of potential for these designer nanomaterials within the biomedical, materials, and analytical communities.     

Expanding the Repertoire of Low-Molecular-Weight Pentafluorosulfanyl-Substituted Scaffolds

The pentafluorosulfanyl (-SF₅) functional group is of increasing interest as a bioisostere in medicinal chemistry. A library of SF₅-containing compounds, including amide, isoxazole, and oxindole derivatives, was synthesised using a range of solution-based and solventless methods, including microwave and ball-mill techniques. The library was tested against targets including human dihydroorotate dehydrogenase (HDHODH). A subsequent focused approach led to synthesis of analogues of the clinically used disease modifying anti-rheumatic drugs (DMARDs), Teriflunomide and Leflunomide, considered for potential COVID-19 use, where SF₅ bioisostere deployment led to improved inhibition of HDHODH compared with the parent drugs. The results demonstrate the utility of the SF₅ group in medicinal chemistry.