Effects of lubricant additives on the performance of hydrodynamically lubricated journal bearings

A non-Newtonian rheological model to investigate theoretically the effects of lubricant additives on the steady state performance of hydrodynamically lubricated finite journal bearings is introduced. In this model, the non-Newtonian behavior resulting from blending the lubricant with polymer additives is simulated by Stokes couple stress fluid model. The formed boundary layer at the bearing surface is described through the use of a hypothetical porous medium layer that adheres to the bearing surface. The Brinkman-extended Darcy equations are utilized to model the flow in the porous region. A stress jump boundary condition is applied at the porous media/fluid film interface. A modified form of the Reynolds equation is derived and solved numerically using a finite difference scheme. The effects of bearing geometry, and non-Newtonian behavior of the lubricant on the steady-state performance characteristics such as pressure distribution, load carrying capacity, side leakage flow, and coefficient of friction are presented and discussed. The results showed that lubricant additives significantly increase the load carrying capacity and reduce both the coefficient of friction and the side leakage as compared to the Newtonian lubricants.     

Implementing two methods in GIS software for indoor routing: an empirical study

Multimedia Tools and Applications - With increasing demands for indoor GIS, indoor routing and analysis attracts attention from both GIS and architecture worlds. This paper aimes to provide...     

Compositional characteristics and aromatic profile of date palm seeds from seven varieties grown in Tunisia

This paper reports a discrimination study based on the physico‐chemical characteristics, fatty acids and profile of volatile compounds of the seeds from seven date palm varieties (Phoenix dactylifera L.) grown in Tunisia. Date seeds contained 10.49–14.76% moisture; 6.28–11.2% fat (on a dry weight basis); 2.67–12.85% protein; 0.91–6.06% reducing sugar; 0.61–2.98% sucrose and 0.97–1.17% ash. Gas liquid chromatography revealed that the oil fraction of the date palm seeds contained eighteen fatty acids, with oleic acid (30.77–42.50%) and lauric acid (18.51–27.48%) as the main unsaturated and saturated ones. Volatile profile showed differences among varieties. In total, forty‐five compounds were identified, mainly alcohols, aldehydes and unsaturated hydrocarbons ones. This study provides evidence that the seeds of date may be a potential source of valuable nutrients with interesting functionality.     

Effect of thermal insulation using leather and carpentry wastes on thermal comfort and energy consumption in a residential building

In this work, we investigate the effect of the thermal insulation by leather wastes (wet-blue chrome shavings and buffing dust) and carpentry wastes (wood shavings and sawdust) on the energy consumption of a model building using the average climatic data of the city of Casablanca (Morocco). For this study, we used the dynamic thermal simulation tool “TRNSYS 16” which predicts the thermal behavior of building and systems associated with it. Using this software, we evaluated the effect of the above material wastes on thermal comfort and building energy consumption. The type and the thickness of the materials were considered as variants to choose the better solution. The average temperatures of building supposed thermally insulated compared to those obtained without insulation clearly show the thermal insulation ability of tested materials during the cold and warm periods of the year. Increasing the thickness of the insulator makes locals increasingly comfortable. Because of their performance, leather and carpentry wastes can compete with conventional insulating materials such as polystyrene and cork.     

Comparison of alteplase (tissue plasminogen activator) high‐dose vs. low‐dose protocol in restoring hemodialysis catheter function: The ALTE‐DOSE study

Hemodialysis catheter (HDC) dysfunction due to thrombosis is common, and dysfunction incidence can reach up to 50% within 1 year of use. Although administration of intraluminal alteplase (tissue plasminogen activator [tPA]) is the standard of practice to pharmacologically restore HDC function, there are no evidence‐based guidelines concerning the optimal tPA dose. The purpose of this study was to compare the efficacy of 1.0‐mg vs. 2.0‐mg tPA dwell protocols in restoring the HDC function in thrombotic dysfunctional catheters. A retrospective, single‐center study was conducted on two independent cohorts of patients; the first (n = 129) received 2.0 mg tPA/catheter lumen, while the second (n = 108) received 1.0 mg tPA/catheter lumen. Kaplan–Meier and Cox regression analyses were performed to compare the catheter survival time between patients who received 1.0 mg tPA and those who received 2.0 mg tPA. Catheter removal occurred in 25 (19.4%) of those catheters treated with 1.0 mg tPA compared with 11 (10.2%) of catheters treated with 2.0 mg tPA (P = 0.05). The hazard ratio (HR) for catheter removal was 2.75 (95% confidence interval [^95%CI] = 1.25–6.04) for the 1.0‐mg tPA cohort compared with the 2.0‐mg tPA cohort. Correction added on 3 December 2012, after first online publication: The tPA cohort values were changed. Female gender (HR = 2.51; ^95%CI = 1.20–5.27) and age (HR = 0.96; ^95%CI = 0.94–0.98) were also associated with catheter survival. Our findings suggest that treatment of dysfunctional HDC with 2.0‐mg tPA dwells is superior to 1.0‐mg tPA dwells.     

Simulation of a localized heating system for broiler brooding to improve energy performance

The aim of this work is to evaluate the performance of an innovative localized solar‐assisted pen heating system for brooding using a 3D computational simulation model of the heated space. The warm air‐curtained pen ensures acceptable temperature, air velocity, relative humidity, and air quality that meet the ventilation and heat requirements for a typical pen of 100 chicks as recommended by the American Society of Heating Refrigeration and Air Conditioning Engineers and American Society of Agricultural and Biological Engineers. The supply flow characteristics and the simulated velocity and temperature field of the curtained region were determined such that they meet the ventilation requirements and comfort criteria. Results show that air supplied at 40°C is capable of delivering the desired microenvironment at bird level while the heat input to the unit is 685 W when outdoor temperature is ?5°C. The system's energy performance was then analyzed using a prototype of 16 pens. The energy consumption of the new heating scheme consumed one third of the energy required by conventional non‐localized system. Moreover, integrating the new design with a solar system utilizing parabolic concentrators provided 72% of the power load from solar energy during a winter flock operation and 100% during other seasons. Copyright © 2013 John Wiley & Sons, Ltd.     

Towards the Establishment of a Continuous Nondestructive Monitoring Technique for Fresh Concrete

Despite the fact that concrete is the most widely used construction material, conventional techniques for the estimation of the mechanical properties are only applicable to the hardened material. Moreover, concerning the fresh concrete examination, the already existing techniques provide only qualitative information, are not representative over the full time period of curing, setting and hardening or have limited accuracy and repeatability. In this study, the acoustic emission (AE) technique is employed in order to investigate the activity within fresh concrete as early as a few minutes after mixing. Several processes like settlement, segregation, formation and migration of air bubbles, as well as formation of hydrates produce AEs which so far have not been properly examined in literature. The first and foremost goal is to check the capacity of the new AE setup to record emissions earlier than previous studies (just after casting). The next goal concerns the possibility to characterize the different types of emissions relatively to their original source mechanism while the final goal would be the investigation of possible correlations between the early age acoustic activity and the final mechanical properties. For this reason, an AE setup is applied utilizing the favorable wave transmission properties of the metal casting molds, which act as a sort of waveguide. After validating its sensitivity, several laboratory tests are performed in concrete with varying water and aggregate content. It is found that the rate of AE activity follows trends similar to the typical hydration curves known from literature and is also indicative of the mix parameters. Finally, it should be mentioned that it is the first study that exploits the acoustic activity as early as the moment of mixing while apart from the number of emissions which is usually examined, the monitoring includes waveform parameters that show strong characterization potential.     

Statistical analysis of achievable resolution limit in the near field source localization context

In this fast communication, we derive the statistical resolution limit (SRL), characterizing the minimal parameter separation, to resolve two closely spaced known near-field sources impinging on a linear array. Toward this goal, we conduct on the first-order Taylor expansion of the observation model a Generalized Likelihood Ratio Test (GLRT) based on a Constrained Maximum Likelihood Estimator (CMLE) of the SRL. More precisely, the minimum separation between two near-field sources, that is detectable for a given probability of false alarm and a given probability of detection, is derived herein. Finally, numerical simulations are done to quantify the impact of the array geometry of the signal sources power distribution and of the array aperture on the statistical resolution limit.