Delay dependent robust stability of singular systems with additive time-varying delays

This paper considers the problem of delay-dependent robust stability for uncertain singular systems with additive time-varying delays. The purpose of the robust stability problem is to give conditions such that the uncertain singular system is regular, impulse free, and stable for all admissible uncertainties. The results are expressed in terms of linear matrix inequalities (LMIs). Finally, two numerical examples are provided to illustrate the effectiveness of the proposed method.     

Accelerating SPARQL queries by exploiting hash-based locality and adaptive partitioning

State-of-the-art distributed RDF systems partition data across multiple computer nodes (workers). Some systems perform cheap hash partitioning, which may result in expensive query evaluation. Others try to minimize inter-node communication, which requires an expensive data preprocessing phase, leading to a high startup cost. Apriori knowledge of the query workload has also been used to create partitions, which, however, are static and do not adapt to workload changes. In this paper, we propose AdPart, a distributed RDF system, which addresses the shortcomings of previous work. First, AdPart applies lightweight partitioning on the initial data, which distributes triples by hashing on their subjects; this renders its startup overhead low. At the same time, the locality-aware query optimizer of AdPart takes full advantage of the partitioning to (1) support the fully parallel processing of join patterns on subjects and (2) minimize data communication for general queries by applying hash distribution of intermediate results instead of broadcasting, wherever possible. Second, AdPart monitors the data access patterns and dynamically redistributes and replicates the instances of the most frequent ones among workers. As a result, the communication cost for future queries is drastically reduced or even eliminated. To control replication, AdPart implements an eviction policy for the redistributed patterns. Our experiments with synthetic and real data verify that AdPart: (1) starts faster than all existing systems; (2) processes thousands of queries before other systems become online; and (3) gracefully adapts to the query load, being able to evaluate queries on billion-scale RDF data in subseconds.     

Numerical study of evaporation by mixed convection of a binary liquid film

This paper deals with a numerical analysis of the evaporation of binary liquid film. The film is falling down on one plate of a vertical channel under mixed convection channel. The first plate of a vertical channel is externally submitted to a uniform heated flux q₁ while the second one (y = d) is dry and isothermal. The liquid mixture consists of water (the more volatile component) and ethylene glycol while the gas mixture has three components: dry air, water vapour and ethylene-glycol vapour. The results concern the effects of the inlet parameters in the gas and in the liquid film on the interfacial pressure, temperature and concentration profiles. The evolutions of the heat fluxes and of the water and mixture evaporation rates have been analysed. Results obtained show, in particular, that it is possible to increase the accumulated evaporation rate of water and of the liquid mixture when the inlet liquid concentration of ethylene glycol (the less volatile component) is less than 40%. This result has been explained by the fact that an increase of the inlet liquid concentration of ethylene glycol has two antagonistic effects on the accumulated evaporation rates of water and of liquid mixture.     

Thermal energy and economic analysis of a PCM-enhanced household envelope considering different climate zones in Morocco

This study investigates the thermal energy potentials and economic feasibility of an air-conditioned family household-integrated phase change material (PCM) considering different climate zones in Morocco. A simulation-based optimisation was carried out in order to define the optimal design of a PCM-enhanced household envelope for thermal energy effectiveness and cost-effectiveness of predefined candidate solutions. The optimisation methodology is based on coupling Energyplus^® as a dynamic simulation tool and GenOpt^® as an optimisation tool. Considering the obtained optimum design strategies, a thermal energy and economic analysis are carried out to investigate PCMs’ integration feasibility in the Moroccan constructions. The results show that the PCM-integrated household envelope allows minimising the cooling/heating thermal energy demand vs. a reference household without PCM. While for the cost-effectiveness optimisation, it has been deduced that the economic feasibility is stilling insufficient under the actual PCM market conditions. The optimal design parameters results are also analysed.     

Characterization of artisanally and semiautomatically extracted argan oils from Morocco

The present study was conducted to know the possible influence of the seed treatment, method of extraction and geographical origin on the quality and chemical composition of argan oil. Artisanally and semiautomatically extracted argan oils, from roasted and unroasted seeds, from interior and coast areas, were studied. The quality parameters analyzed were acid value, peroxide value, K₂₃₂ and K₂₇₀, triacylglycerols and fatty acid composition, polar compounds, total phenols, tocopherol content and oil stability index (OSI). Seed treatment and extraction method showed a higher influence on quality parameters than geographical area; the quality parameters of the different oils were discussed. The total phenolic content in all analyzed samples was lower than 10 ppm. γ‐Tocopherol was the major tocopherol (84.4–86.4%) with a high contribution to the total tocopherol content (383–485 ppm). The OSI of the argan oil samples were well correlated (R = 0.97) with the tocopherol contents. The argan oil samples obtained from roasted seeds presented higher stability (26–38 h) than the oils from unroasted seeds (16–32 h).     

Analysis of Multi-Server Scheduling Paradigm for Service Guarantees during Network Mobility

Multi-server scheduling of traffic flows over heterogeneous wireless channels affix fresh concerns of inter-packet delay variations and associated problems of out-of-sequence reception, buffer management complexity, packet drops and re-ordering overhead. In this paper, we have presented an exclusive multi-server scheduling algorithm that is specifically tuned for mobile routers equipped with multiple wireless interfaces and has attained multiple care-of-address registrations with its home agent (HA). The proposed adaptive, Self-clocked, Multi-server (ASM) scheduling algorithm is based on predetermined transmission deadlines for each arrived packet at the mobile router. The mobile flows receive desired service levels in accordance with their negotiated service rates and are only constraint by the cumulative capacity of all active links. The major challenge lies in the handling of asymmetric channels to stitch into a unified virtual channel of higher capacity with reliable service guarantees during mobility. The sorted list of transmission schedules is used to assign physical channels in increasing order of their availability. This approach specifically encapsulates the physical layer disconnections during the handovers and ensures continuous service to ongoing flows. The proposed scheduling scheme is supplemented by an analytical model and simulations to verify its efficacy. The simulation results demonstrate higher degree of reliability and scalability of service provisioning to flows during mobility.     

Inhibition of humic substances mediated photooxygenation of furfuryl alcohol by 2,4,6-trimethylphenol. Evidence for reactivity of the phenol with humic triplet excited states

To probe the reactivity of 2,4,6-trimethylphenol with humic triplet excited states, we investigated its influence on the humic substances-mediated photooxygenation offurfuryl alcohol. Elliott soil humic and fulvic acids were employed for these experiments. When added in the concentration range of 10(-4) - 10(-3) M, 2,4,6-trimethylphenol inhibited furfuryl alcohol photooxygenation to an extent depending on its concentration. The inhibiting effect decreased as the oxygen concentration was increased. By postulating that 2,4,6-trimethylphenol competes with oxygen for reaction with humic triplet excited states and with furfuryl alcohol for reaction with singlet oxygen, we obtained kinetic laws describing the consumption profiles of furfuryl alcohol and 2,4,6-trimethylphenol. Experimental rates of 2,4,6-trimethylphenol and furfuryl alcohol loss could be satisfactorily fitted with 1.09-1.16 for the ratio k2/k3, where k2 and k3 are the reaction rate constants of humic triplet excited states with oxygen and 2,4,6-trimethylphenol, respectively. These types of experiments could be extended to a variety of substrates to measure their reaction rate constants with humic triplet excited states.     

Robust H_{\infty } filtering for uncertain two-dimensional continuous systems with time-varying delays

This paper deals with the problem of delay-dependent robust $H_{\infty }$ H ∞ filtering for uncertain two-dimensional (2-D) continuous systems described by Roesser state space model with time-varying delays, with the uncertain parameters assumed to be of polytopic type. A sufficient condition for $H_{\infty }$ H ∞ noise attenuation is derived in terms of linear matrix inequalities, so a robust $H_{\infty }$ H ∞ filter can be obtained by solving a convex optimization problem. Finally, some examples are provided to illustrate the effectiveness of the proposed methodology.     

Coupled Eulerian Lagrangian finite element modeling of friction stir welding processes

A 3-dimensional localized finite element model (FEM) is developed to predict likely conditions that result in defect generation during friction stir welding (FSW). The workpiece is modeled using Eulerian formulation, while the tool is modeled using Lagrangian. Coulomb's frictional contact model is adopted to define the tool workpiece interaction, while the welding speed is defined by material inflow and outflow velocities. The numerical results show that the coefficient of friction has a major effect on void formation; the lower the friction coefficient is applied, the larger the void is formed. Furthermore, welding using force control (FC) at lower welding speed results in smaller void size and wider plastic zone, leading to higher quality weld.     

A Multi-objective Optimization for Sizing and Placement of Voltage-controlled Distributed Generation Using Supervised Big Bang–Big Crunch Method

Abstract—This article presents an efficient multi-objective optimization approach based on the supervised big bang–big crunch method for optimal planning of dispatchable distributed generator. The proposed approach aims to enhance the system performance indices by optimal sizing and placement of distributed generators connected to balanced/unbalanced distribution networks. The distributed generation units in the proposed algorithms are modeled as a voltage-controlled node with the flexibility to be converted to a constant power node in the case of reactive power limit violation. The proposed algorithm is implemented in the MATLAB (The MathWorks, Natick, Massachusetts, USA) environment, and the simulation studies are performed on IEEE 69-bus and IEEE 123-node distribution test systems. Validation of the proposed method is done by comparing the results with published results obtained from other competing methods, and the consequent discussions prove the effectiveness of the proposed approach.