An energy-efficient scheduling and rescheduling method for production and logistics systems†

Scheduling can be defined as the allocation of available resources over time while optimising a set of criteria like early completion time of task, holding inventory, etc. The complexity of the scheduling problem, already known to be high, increases if dynamic events and disruptions are considered. In addition, in production and logistics, designers of scheduling systems must consider sustainability-related expectations. This paper presents an energy-efficient scheduling and rescheduling method (named Green Rescheduling Method, GRM). GRM aims at the solving of the dynamic scheduling problem under the condition of a certain level of routing flexibility enabling the reassignment of tasks to new resources. The key performance indicators integrated into the proposed GRM are effectiveness and efficiency-oriented. Applications concern the domains of production and logistics. In order to assess the proposed approach, experimentations have been made and results illustrate the applicability of GRM to build efficient and effective scheduling and rescheduling both for flexible manufacturing systems and inventory distribution systems in a physical internet network. A mathematical formulation for flexible job shop problem with energy consumption is also proposed using mixed Integer programming to evaluate the performance of the predictive part of GRM.     

Pollux: a dynamic hybrid control architecture for flexible job shop systems

Nowadays, manufacturing control systems can respond more effectively to exigent market requirements and real-time demands. Indeed, they take advantage of changing their structural and behavioural arrangements to tailor the control solution from a diverse set of feasible configurations. However, the challenge of this approach is to determine efficient mechanisms that dynamically optimise the configuration between different architectures. This paper presents a dynamic hybrid control architecture that integrates a switching mechanism to control changes at both structural and behavioural level. The switching mechanism is based on a genetic algorithm and strives to find the most suitable operating mode of the architecture with regard to optimality and reactivity. The proposed approach was tested in a real flexible job shop to demonstrate the applicability and efficiency of including an optimisation algorithm in the switching process of a dynamic hybrid control architecture.     

Isothermal Crystallization of Palm Oil-Based Fats with and without the Addition of Essential Oils

The objective of study was to evaluate the crystallization behavior of palm oil-based fats processed with and without the addition of essential oils (5% w/w) obtained from the flowers (EsOF) and stems (EsOS) of Pituranthos scoparius. Palm oil (PO) and a mixture of PO, soybean oil, and sunflower oil (Mix) were tested. The addition of the essential oils did not change the melting points of the fats but affected their crystallization behavior. A delay in crystallization was observed, evidenced by lower crystallization rates, and lower solid fat contents. This delay was comparable in the samples crystallized with EsOF and EsOS for the PO samples but EsOF was more efficient at delaying crystallization in the Mix sample. EsOF generated a less organized crystalline network in both samples (lower enthalpy values) while EsOS generated a more organized crystalline network (high enthalpy values) when used in the Mix sample. The addition of EsO also affected the crystal microstructure in some cases. While a slight increase in crystal size was observed for some PO samples crystallized with EsOF, no change or a decrease in crystal size was observed for the samples crystallized with EsOS. A slight decrease in crystal size was observed for Mix samples crystallized with EsOF while no effect was observed for these samples crystallized with EsOS. Results from this study show that these essential oils can be used as natural additives to modify the crystallization of fats for food applications and therefore widen their functional properties.     

Quantification of metallothionein-like proteins in the mussel Mytilus galloprovincialis using RP-HPLC fluorescence detection

A HPLC-fluorescence method, using the fluorophore SBD-F (ammonium-7-fluorobenz-2-oxa-1,3-diazole-4-sulfonate), was adapted for the quantification of metallothioneins and their isoforms from the Moroccan mussel Mytilus galloprovincialis. The method was first optimized using a rabbit liver metallothionein. The effects of EDTA, tris(2-carboxyethyl)phosphine, and SBD-F on the labeling efficiency were studied. The optimized method was then applied to evaluate the amount of metallothionein in the mussels either exposed to cadmium in the laboratory or collected from the Casablanca coast, Morocco. The concentrations of metallothioneins measured in the field samples describe the degree of contamination of the sites and are reflected by distinct isoform patterns.     

A chemical method to graft carbon nanotubes onto a carbon fiber

A simple method is developed for grafting carbon nanotubes (CNTs) onto a carbon fiber surface. CNT and carbon fiber undergo an oxidation treatment. Oxidation generates oxygen, like carboxyl, carbonyl or hydroxyl groups, or amine groups on nanotubes and carbon fiber surface. Functionalized CNTs are dispersed in a solvent and deposited on carbon fibers. The bonds between CNT and carbon fiber are operated by esterification, anhydridation or amidization of the chemical surface groups. The resulting materials are characterized by scanning electron microscopy (SEM). CNTs form a 3D network around the carbon fibers. Likewise, CNT bonding between two fibers is observed.     

Latex influence on the mechanical behavior and durability of cementitious materials

The results of an experimental program conducted on latex-modified mortars are presented in this article. These mortars have become of growing interest in the field of construction. They were used as superplasticizers, or water reducers, for finishing work applications and for repairs, coatings, and waterproofing. This study is about using two polymers (latex), i.e. styrene–butadiene rubber and styrene–acrylic, in order to assess their performance in replacing cement in mortars. A series of mortar mixtures, containing 0, 2.5, 5, 10, 15, and 20% of solid polymer latex (by weight), were prepared and tested in the fresh and hardened states. The test parameters include the fluidity, compressive and flexural strengths, porosity accessible to water, adhesion to clay bricks, and cementitious substrates. The experimental results showed that substituting cement into modified mortars improves their fluidity and adhesion. In the case of clay substrates, a cohesive failure occurs within the substrate layer beyond 10% of substitution, while the rupture takes place at the interface for all formulations tested on cementitious substrates. It was also noted that the flexural tensile strength improved beyond 60 days. However, the compressive strength of polymer mortars decreased with the substitution rate of cement, for all maturities considered. However, for porosity accessible to water, the results follow a linear function, with an inflection at 5% of latex substitution.     

Varying Heating Effect on Mixed Convection of Nanofluids in a Vented Horizontal Cavity with Injection or Suction

The problem of mixed convection heat transfer inside a horizontal vented enclosure through the lower and upper parts, respectively, of its left and right vertical walls is studied numerically using Al₂O₃-water nanofluid as working fluid. The bottom wall is subjected to a linearly varying (increasing or decreasing) heating temperature profiles, while the other boundaries are considered thermally insulated. The fresh fluid is admitted from the bottom part of the left vertical wall by injection or by the suction imposed on the opening of the right vertical wall. Based on numerical predictions, the conjugate effect of the Reynolds number and the nanoparticle concentration on fluid flow and heat transfer characteristics is studied. The obtained results demonstrate clearly the positive role of the nanoparticles addition on the improvement of the heat transfer rate and the mean temperature within the cavity. In addition, the flow structure and the temperature distribution inside the cavity are seen to be very sensitive to the variations of the Reynolds number, the imposed external flow mode, and the heating type. Results presented show that, in general, the decreasing heating mode is more favorable to the heat transfer in comparison with the case of the increasing heating mode. The cooling efficiency is found to be more pronounced by the injection/suction mode by applying the increasing/decreasing heating type.