Bandwidth Adaptive Cache Coherence Optimizations for Chip Multiprocessors

Chip Multiprocessors (CMPs) have different technological parameters and physical constraints than earlier multi-processor systems, which should be taken into consideration when designing cache coherence protocols. Also, contemporary cache coherence protocols use invalidate schemes that are known to generate a high number of coherence misses. This is especially true under producer-consumer sharing patterns that can become a performance bottleneck as the number of cores increases. This paper presents two mechanisms to design efficient and scalable cache coherence protocols for CMPs. First, we propose an adaptive hybrid protocol to reduce coherence misses observed in write-invalidate based protocols. The proposed protocol is based on a write-invalidate scheme. However, adaptively, it can push updates to potential consumers based on observed producer-consumer sharing patterns. Secondly, we extend this adaptive protocol with an interconnection resource aware mechanism. Experimental evaluations, conducted on a tiled-CMP via full-system simulation, were used to assess the performance from our proposed dynamic hybrid protocols. Performance analysis is presented on a set of scientific applications from the SPLASH-2 and NAS parallel benchmark suites. Results showed that the proposed mechanisms reduce cache-to-cache sharing misses up to 48 % and speed up application performance up to 34 %. In addition, the proposed interconnection resource aware mechanism is proven to perform well under varying interconnection utilizations.     

Modification of sandy soil using water‐borne polymer

A new polymeric system has been applied for structural modification of (noncompactable) sandy soils. The system is based on a water‐borne styrene acrylic polymeric formulation (emulsion) containing varying amounts of solid polymer. The present work deals with system optimization and measurements designed to examine the effects of polymer content on hydraulic conductivity and compressive strength. Samples were prepared from prescribed amounts of polymer, water, and sand by using two different preparations methods (mixing and spraying). Measurements of hydraulic conductivity for both sets of samples were conducted in a flexible membrane test apparatus. For the first set of samples, the permeability coefficient of the sand was noted to be reduced 10‐fold (from 10^?5 to 10^?6 m s^?1) upon the incorporation of about 2% polymer. In the second set (samples prepared with the spraying method), the hydraulic conductivity was further reduced to 7.2 × 10^?7 at a polymer concentration of about 2%. Stress–strain measurements made on dry cylindrical specimens disclosed remarkable enhancement in the mechanical behavior of the system. For both types of preparation methods, the compressive strength and modulus of elasticity increased linearly with the polymer concentration in the sample. Scanning electron microscopic examination revealed that the dramatic reduction in the permeability and the improved mechanical properties are attributed to the polymer coverage of the sand particles and the development of interconnecting ties between them. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2484–2491, 2003     

An investigation on wear behavior of UHMWPE/carbide composites at elevated temperatures

Ultra-high molecular weight polyethylene (UHMWPE) is extensively used in frictional applications due to its advanced wear resistance. This advanced polymer is reinforced with hard particulate fillers for further developments against wear conditions. Since elevated temperatures prevail in the service conditions, wear behavior of UHMWPE composites is an important issue for the engineering applications. In the present work, UHMWPE-based composites including silicon carbide (SiC) fillers were fabricated in a compression molding chamber. In the specimen preparation stage, molding pressure, filler amount, and filler particle size were varied to investigate the influence of these variables. Upon deciding the optimum parameters from the wear tests conducted at room temperature, the wear experiments were repeated for the optimum specimen at elevated temperatures, such as 40 and 60°C. According to the results, the wear behavior of the SiC/UHMWPE composites is heavily changed by the effect of elevated temperature. Adhesive effect is pronounced at elevated temperatures while the wear characteristics possess the abrasive effect in the sliding path. In addition, the composites exhibit an accelerated material loss as temperature increases during the frictional system.     

Improved phase performance for rotman lens

Rotman lenses are used to obtain multiple beams from a single array. Although the beams produced by the feed antennas at focal points have no path length errors, the beams produced by feed antennas at off focal points may have large path length errors. These path length errors cause deterioration in the multiple beams. In this article, two novel methods are introduced to obtain feed curves which reduce the path length errors of off focal feed points significantly, compared with the commonly used circular and elliptical feed curves. The first method obtains feed curve points based on having zero path length error at three chosen points of the radiating array for each beam direction. The second method uses the particle swarm optimization method for obtaining optimum feed points for each beam direction. The results show that there is a very significant drop in the level of the maximum path length errors (in the order of about 1:4). © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE 23: 634–638, 2013.     

Feature Selection for Detecting ICMPv6-Based DDoS Attacks Using Binary Flower Pollination Algorithm

Internet Protocol version 6 (IPv6) is the latest version of IP that goal to host 3.4 × 10³⁸ unique IP addresses of devices in the network. IPv6 has introduced new features like Neighbour Discovery Protocol (NDP) and Address Auto-configuration Scheme. IPv6 needed several protocols like the Address Auto-configuration Scheme and Internet Control Message Protocol (ICMPv6). IPv6 is vulnerable to numerous attacks like Denial of Service (DoS) and Distributed Denial of Service (DDoS) which is one of the most dangerous attacks executed through ICMPv6 messages that impose security and financial implications. Therefore, an Intrusion Detection System (IDS) is a monitoring system of the security of a network that detects suspicious activities and deals with a massive amount of data comprised of repetitive and inappropriate features which affect the detection rate. A feature selection (FS) technique helps to reduce the computation time and complexity by selecting the optimum subset of features. This paper proposes a method for detecting DDoS flooding attacks (FA) based on ICMPv6 messages using a Binary Flower Pollination Algorithm (BFPA-FA). The proposed method (BFPA-FA) employs FS technology with a support vector machine (SVM) to identify the most relevant, influential features. Moreover, The ICMPv6-DDoS dataset was used to demonstrate the effectiveness of the proposed method through different attack scenarios. The results show that the proposed method BFPA-FA achieved the best accuracy rate (97.96%) for the ICMPv6 DDoS detection with a reduced number of features (9) to half the total (19) features. The proven proposed method BFPA-FA is effective in the ICMPv6 DDoS attacks via IDS.     

High-performance MEMS shutter display with metal-oxide thin-film transistors and optimized MEMS element

Active matrix prestressed microelectromechanical shutter displays enable outstanding optical properties as well as robust operating performance. The microelectromechanical systems (MEMS) shutter elements have been optimized for higher light outcoupling efficiency with lower operation voltage and higher pixel density. The MEMS elements have been co-fabricated with self-aligned metal-oxide thin-film transistors (TFTs). Several optimizations were required to integrate MEMS process without hampering the performance of both elements. The optimized display process requires only seven photolithographic masks with ensuring proper compatibility between MEMS shutter and metal-oxide TFT process.     

Passivating Defects of Perovskite Solar Cells with Functional Donor-Acceptor–Donor Type Hole Transporting Materials

In this study, a series of donor–acceptor–donor (D-A-D) type small molecules based on the fluorene and diphenylethenyl enamine units, which are distinguished by different acceptors, as holetransporting materials (HTMs) for perovskite solar cells is presented. The incorporation of the malononitrile acceptor units is found to be beneficial for not only carrier transportation but also defects passivation via Pb–N interactions. The highest power conversion efficiency of over 22% is achieved on cells based on V1359, which is higher than that of spiro-OMeTAD under identical conditions. This st shows that HTMs prepared via simplified synthetic routes are not only a low-cost alternative to spiro-OMeTAD but also outperform in efficiency and stability state-of-art materials obtained via expensive cross-coupling methods.     

Power Control for Cognitive Radio Networks: A Game Theoretic Approach

In communication industry one of the most rapidly growing area is wireless technology and its applications. The efficient access to radio spectrum is a requirement to make this communication feasible for the users that are running multimedia applications and establishing real-time connections on an already overcrowded spectrum. In recent times cognitive radios (CR) are becoming the prime candidates for improved utilization of available spectrum. The unlicensed secondary users share the spectrum with primary licensed user in such manners that the interference at the primary user does not increase from a predefined threshold. In this paper, we propose an algorithm to address the power control problem for CR networks. The proposed solution models the wireless system with a non-cooperative game, in which each player maximize its utility in a competitive environment. The simulation results shows that the proposed algorithm improves the performance of the network in terms of high SINR and low power consumption.