Compact bandpass filter based on SIW loaded by open complementary split‐ring resonators

A compact substrate integrated waveguide (SIW) with open complementary split‐ring resonators (OCSRRs) loaded on the waveguide surface is proposed. The OCSRRs can be interpreted in terms of electric dipoles and they are good candidates to behave as electric scatterers. By loading OCSRRs on the waveguide surface, a forward‐wave pass‐band propagating below the waveguide cutoff frequency is generated. The resonance frequency of the OCSRRs is approximately half of the resonance frequency of the complementary split ring resonator (CSRR). Therefore, the electrical size of this particle is larger than the CSRRs and the OCSRRs are more appropriate for the SIW miniaturization. A bandpass response with a sharp rejection frequency band is obtained by properly manipulating the structure of the elements. By changing the orientation of the OCSRRs, two types of unit cell are proposed. Moreover, by resizing the OCSRRs, resonance frequency can be easily moved and the bandwidth can be tuned by the coupling between two OCSRRs. Compared with some other reported bandpass filters (BPFs) with SIW technique, the presented BPF has great improvements on size reduction and selectivity. To verify the methodology, two filters with center frequency of 5.5 GHz are designed and measured. The measured results are in good agreement with the simulated ones. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:674–682, 2016.     

Area-Efficient 60 GHz +18.9 dBm Power Amplifier with On-Chip Four-Way Parallel Power Combiner in 65-nm CMOS

This paper presents a compact 60-GHz power amplifier utilizing a four-way on-chip parallel power combiner and splitter. The proposed topology provides the capability of combining the output power of four individual power amplifier cores in a compact die area. Each power amplifier core consists of a three-stage common-source amplifier with transformer-coupled impedance matching networks. Fabricated in 65-nm CMOS process, the measured gain of the 0.19-mm² power amplifier at 60 GHz is 18.8 and 15 dB utilizing 1.4 and 1.0 V supply. Three-decibel band width of 4 GHz and P_1dB of 16.9 dBm is measured while consuming 424 mW from a 1.4-V supply. A maximum saturated output power of 18.3 dBm is measured with the 15.9% peak power added efficiency at 60 GHz. The measured insertion loss is 1.9 dB at 60 GHz. The proposed power amplifier achieves the highest power density (power/area) compared to the reported 60-GHz CMOS power amplifiers in 65 nm or older CMOS technologies.     

Preparation of bimodal polypropylene in two‐step polymerization

Polymerization of propylene was carried out by using MgCl₂.EtOH.TiCl₄.DIBP.TEA.cHMDMS catalyst system in n‐heptane, where MgCl₂, EtOH, TiCl₄, DIBP (diisobutyl phthalate), TEA (triethyl aluminum), and cHMDMS (cyclohexyl methyl dimethoxy silane) were support, ethanol for alcoholation, catalyst, external donor, cocatalyst (activator), and internal donor, respectively. The catalyst activity and polymer isotacticity were studied by measuring the produced polymer and its solubility in boiling n‐heptane, respectively. The molecular weight and molecular weight distribution of the polymers were evaluated by gel permeation chromatography. Hydrogen was used for controlling the molecular weight. For producing the bimodal polypropylene, the polymerization was carried out in two steps (i.e., in the presence and absence of hydrogen). It was found that the catalyst showed high activity and stereoselectivity, on the other hand, bimodal polymer could simply be produced in two‐step polymerization by using MgCl₂.EtOH.TiCl₄.DIBP.TEA.cHMDMS catalyst system. Meanwhile, the effect of the step of the hydrogen adding on propylene polymerization was investigated. It was shown that the addition of hydrogen in the second step was more suitable. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1456–1462, 2006     

Interfacial interactions of biomaterials in water decontamination applications

Understanding the fundamental aspects of transport through biomaterials is a necessity for a vast range of bio-related studies. Biofilm formation on the surface of adsorptive media such as granular activated carbon (GAC) has been extensively used to remove organic materials, nitrogen species, heavy metals, and other contaminants in wastewater treatment. In this study, a multilayer mass transfer system consisting of the reactor’s bulk fluid, diffusion layer, biofilm, and GAC is modeled. In order to consider the equilibrium at the interface of biofilm and activated carbon, Freundlich adsorption method is applied. The interfacial interactions are taken into account in the biodegradation process. The results of model prediction are compared with the available experimental data and show a very good agreement. The effect of biofilm formation on the reactor porosity is considered through a porous media approach. Furthermore, the influence of variation in particle diameters on the removal efficiency is studied. It can be seen that porosity alteration as a result of biofilm formation within the carbon bed has a noticeable effect on the removal efficiency.     

Critical assessment of arterial transport models

Works pertinent to arterial transport models are analyzed and a critical assessment of the models utilized in the study of fluid flow and mass transfer within the arteries is presented with an emphasis on the role of porous media. Arterial transport models are assessed and classified based on their ability to physically prescribe the arterial anatomy as well as the related transport processes. Pertinent models such as wall-free, homogeneous-wall, and multi-layer models as well as the governing equations and different types of boundary conditions utilized in each model are analyzed.     

A critical review on spark plasma sintering of copper and its alloys

Journal of Materials Science - Copper and its alloys have been in the service of humankind earlier than any other metal throughout history. In the present review, all aspects of the SPS of copper...     

Automatic zone identification in scientific papers via fusion techniques

Scientometrics - Zone identification is a topic in the area of text mining which helps researchers be benefited by the content of scientific papers in a satisfactory manner. The major aim of zone...     

Optimization energy consumption with multiple mobile sinks using fuzzy logic in wireless sensor networks

Wireless Networks - Each sensor in WSNs receives data from the limited area under its coverage. The received data is processed by the sensor; then, it is wirelessly transmitted to the sink....     

EFFECT OF HEATED WALL POSITION ON MIXED CONVECTION IN A CHANNEL WITH AN OPEN CAVITY

Mixed convection in an open cavity with a heated wall bounded by a horizontally insulated plate is studied numerically. Three basic heating modes are considered: (a) the heated wall is on the inflow side (assisting flow); (b) the heated wall is on the outflow side (opposing flow); and (c) the heated wall is the horizontal surface of the cavity (heating from below). Mixed convection fluid flow and heat transfer within the cavity is governed by the buoyancy parameter, Richardson number (Ri), and Reynolds number (Re). The results are reported in terms of streamlines, isotherms, wall temperature, and the velocity profiles in the cavity for Ri=0.1 and 100, Re=100 and 1000, and the ratio between the channel and cavity heights (H/D) is in the range 0.1-1.5. The present results show that the maximum temperature values decrease as the Reynolds and the Richardson numbers increase. The effect of the H/D ratio is found to play a significant role on streamline and isotherm patterns for differentheating configurations. The present investigation shows that the opposing forced flow configuration has the highest thermal performance in terms of both maximum temperature and average Nusselt number.