The differential effect of polymyxin B1 on guinea pig lung mitochondrial and microsomal glycerophosphate acyltransferase

The activities of guinea pig lung mitochondrial and microsomal glycerophosphate acyltransferase differed in sensitivity to polymyxin B₁. At an antibiotic concentration of 1 mg/ml, the mitochondrial enzyme activity was stimulated twofold, but the microsomal enzyme activity was completely inhibited. Furthermore, the mitochondrial enzyme activity was stimulated by polymyxin B₁ without the addition of exogenous acyl-CoA. Additional experiments ruled out the possibility of polymyxin B₁ acting as a substrate for the mitochondrial acyltransferase. These results suggest either that the polymyxin B₁ sensitivity of mitochondrial and microsomal glycerophosphate acyltransferase is different or that their accessibility to substrates is different because the two isoenzymes are located differently in the different phospholipid microenvironment of the membranes.     

Insecticidal Effects of Organotin(IV) Compounds on Plutella Xylostella (L.) Larvae. II. Inhibitory Potencies Against Acetylcholinesterase and Evidence for Synergism in Tests With Bacillus Thuringiensis(BER.) and Malathion

Features of pesticide synergism and acetylcholinesterase (AChE) inhibition (in vitro) were studied using a selected range of organotin compounds against the early 4th instar larvae of a highly resistant strain of the diamondback moth (DBM), Plutella xylostella, a major universal pest of cruciferous vegetables.Fourteen triorganotin compounds were evaluated for their ability to enhance the toxicity of the microbial insecticide, Bacillus thuringiensis (BT) and of the commercial insecticide, Malathion to Plutella xylostella larvae. Supplemental synergism was observed with triphenyl- and tricyclopentyltin hydroxides in combinations with Bacillus thuringiensis. Increased synergism was observed with an increase in the number of cyclopentyl groups on tin in the mixed series, Cyp(n) Ph(3-n) SnX, where X = OH, and 1-(1,2,4-triazolyl). The combination of (p-chlorophenyl)diphenyltin N,N-dimethyldithiocarbamate at LD(10) and LD(25) concentrations with sublethal concentrations of Malathion as well as of tricyclohexyltin methanesulphonate at the 0.01% (w/v) concentration with Malathion exerted strong synergistic effects (supplemental synergism) with toxicity index (T.I) values of 7.2, 19.8 and 10.1, respectively.Studies on the in vitro inhibition of acetylcholinesterase prepared from the DBM larvae showed that while most of the triorganotin Compounds tested were without effect on the enzyme, compounds containing the thiocarbamylacetate or the dithiocarbamylacetate moieties demonstrated appreciable levels of inhibition, being comparable in efficacy to commercial grades of Malathion and Methomyl.     

Supramolecular π–π assembly of a neutral [Cu(salen)] complex via the templating effect of an ionic inorganic complex Na2[Cu(mnt)2] forming a framework type material having well-defined channels

A classical ionic inorganic complex Na₂[Cu(mnt)₂] (mnt²⁻ = maleonitriledithiolate = 1,2-dicyanoethylenedithiolate), that acts as a template in assembling neutral [Cu(salen)] (salen = bis(salicylidene)ethylenediamine) complexes forming a framework type arrangement, is accommodated in the channel formed in the crystal structure of a new type of host–guest compound [Cu(salen)]₄ · Na₂[Cu(mnt)₂] (1). The non-covalent supramolecular interactions among [Cu(salen)] complexes and between [Cu(salen)] and [Cu(mnt)₂]²⁻ complexes in the crystal lattice of 1 result in weak antiferromagnetic coupling.     

An expressive framework and efficient algorithms for the analysis of collaborative tagging

The rise of Web 2.0 is signaled by sites such as Flickr, del.icio.us, and YouTube, and social tagging is essential to their success. A typical tagging action involves three components, user, item (e.g., photos in Flickr), and tags (i.e., words or phrases). Analyzing how tags are assigned by certain users to certain items has important implications in helping users search for desired information. In this paper, we develop a dual mining framework to explore tagging behavior. This framework is centered around two opposing measures, similarity and diversity, applied to one or more tagging components, and therefore enables a wide range of analysis scenarios such as characterizing similar users tagging diverse items with similar tags or diverse users tagging similar items with diverse tags. By adopting different concrete measures for similarity and diversity in the framework, we show that a wide range of concrete analysis problems can be defined and they are NP-Complete in general. We design four sets of efficient algorithms for solving many of those problems and demonstrate, through comprehensive experiments over real data, that our algorithms significantly out-perform the exact brute-force approach without compromising analysis result quality.     

Synthesis and densification of magnesium aluminate spinel: effect of MgO reactivity

Stoichiometric magnesium aluminate spinel was synthesized by reaction sintering of alumina with caustic and sintered magnesia. The volume expansion of 5–7% during MgAl₂O₄ formation was utilized to identify the starting temperature of spinel formation and densification by high temperature dilatometry. The magnesia reactivity was determined by measurement of crystallite size and specific surface area. Caustic magnesia and sintered magnesia behave differently vis-à-vis phase formation and densification of spinel. Densification of stoichiometric Mag-Al spinel was carried out between 1650 and 1750 °C. Attempts were made to correlate the MgO reactivity with microstructure and densification of spinel.     

Hydrogen Yield from Low Temperature Steam Reforming of Ethanol

Low temperature steam reforming of ethanol in the temperature range of 200–360°C was studied to maximize the production of H₂. The optimum reaction conditions in presence of a suitable catalyst can produce mainly the desired products H₂ and CO₂. Cu/Al₂O₃ catalysts with six different concentrations ranging from 0 to 10 wt.% Mn, were prepared, characterized and studied for the ethanol-steam reforming reaction. Maximum ethanol conversion of 60.7% and hydrogen yield of 3.74 (mol H₂ / mol ethanol converted) were observed at 360°C for catalyst with 2.5 wt.% Mn loading.     

Grafting of vinyl monomers onto natural rubber,II. Graft copolymerization of methyl methacrylate onto natural rubber using tetravalent ceric ions

The use of tetravalent ceric ions to initiate graft-copolymerization of methyl methacrylate onto natural rubber (NR) has been investigated. The rate of grafting has been determined by varying the concentration of monomer and cerium(IV), the temperature and the solvents. The graft yield increases with increasing monomer concentration up to 1.877 M, with further increase of the monomer, the graft yield decreases. The percentage of grafting increases with increasing cerium(IV) concentration up to 0.035 M, thereafter it decreases. With increasing temperature the graft yield increases. The effect of CuSO₄ on the rate of grafting has also been investigated. A plausible mechanism has been suggested and the kinetic rate expressions have been derived.     

Ion-solvent interaction from viscosity and apparent molar volume of bromates,iodates and sulphates of potassium and sodium in dioxane-water mixtures at different temperatures

The viscosity and apparent molar volume of solutions of KBrO₃, NaBrO₃ KIO₃, NaIO₃, K₂SO₄ and Na₂SO₄ in dioxane (mass fraction: 10, 20 and 30%)-water mixtures at 30, 35, 40 and 45°C have been measured. The ions appear to interact appreciably and the ion-solvent interaction is of the order BrO^?₃ > IO^?₃ > SO^2?₄ and K⁺ > Na⁺.     

Epoxy/poly(methyl methacrylate) interpenetrating polymer networks—morphology,mechanical and thermal properties

Full and semi-IPNs were prepared from epoxy and poly methyl methacrylate (PMMA), by the sequential mode of synthesis and were characterized by measurements of ultimate tensile strength (UTS), elongation at break, modulus, and toughness. Aromatic polyamine adducts and ethylene glycol dimethacrylate were used as the crosslinkers for epoxy and comonomer/crosslinker for methyl methacrylate monomer, respectively. Higher UTS and modulus of the semi-IPNs over full IPNs were attributed to the higher probability of interpenetration. The weight retention in the thermal decomposition of the IPNs and semi-IPNs were higher than the epoxy homopolymer. This enhancement was presumably related to the presence of the unzipped methyl methacrylate monomer which acted as radical scavangers in the epoxy degradation. © 1994 John Wiley & Sons, Inc.     

Prediction of flank wear by using back propagation neural network modeling when cutting hardened H-13 steel with chamfered and honed CBN tools

Productivity and quality in the finish turning of hardened steels can be improved by utilizing predicted performance of the cutting tools. This paper combines predictive machining approach with neural network modeling of tool flank wear in order to estimate performance of chamfered and honed Cubic Boron Nitride (CBN) tools for a variety of cutting conditions. Experimental work has been performed in orthogonal cutting of hardened H-13 type tool steel using CBN tools. At the selected cutting conditions the forces have been measured using a piezoelectric dynamometer and data acquisition system. Simultaneously flank wear at the cutting edge has been monitored by using a tool makers microscope. The experimental force and wear data were utilized to train the developed simulation environment based on back propagation neural network modeling. A trained neural network system was used in predicting flank wear for various different cutting conditions. The developed prediction system was found to be capable of accurate tool wear classification for the range it had been trained.