Electrochemical synthesis of hexagonal closed pack nickel: A hydrogen storage material

An in situ hydrogen generation and storage technique is demonstrated during the electrodeposition of hexagonal closed pack (HCP) nickel from NiCl₂-1-ethyl-3-methylimidazolium chloride (NiCl₂-EmimCl) and NiCl₂·6H₂O-1-ethyl-3-methylimidazolium chloride (NiCl₂·6H₂O-EmimCl) melts. During electrolysis, the dissolution of hydrogen in nickel takes place due to the electrolysis of water. This results in the production of HCP nickel. The hydrogen content of the electrodeposited nickel from NiCl₂-EmimCl was found to be 1.2 wt.%. Thermal analysis showed that the phase transformation from HCP nickel to FCC occurred at 462 °C, releasing hydrogen in the process.     

Experimental investigation of an indirect-type solar cooker for indoor cooking based on a parabolic dish collector

In the present research article, an indirect type solar cooking system has been developed for indoor cooking. In the proposed cooking system, a cooking pot has been placed at a distance of 5 m from the parabolic dish collector, and the heat has been transmitted from the collector to the cooking pot by means of heat transfer fluid. A gear pump of 40 W and insulated pipes have been used to circulate the fluid. A number of experiments have been performed to analyze the performance of the cooking system. During the investigation, the system achieved the temperature of the heat transfer fluid up to 175°C. The time taken for cooking the rice and the black grams has been observed 21 and 68min, respectively. The average thermal efficiency of the proposed system for the entire day has been achieved at 13.11%.     

Integrated energy performance modeling for a retail store building

This paper presents an integrated energy performance modeling approach that considers heat and mass transfer through building envelope, HVAC (heating, ventilation, and air conditioning) and refrigeration systems of a retail store building with limited measured data. The internal heat gains/losses were estimated based on an Extended Kalman Filter. The simulation coupling strategy among room top units (RTUs), refrigeration display cases and zones is based on the ping-pong coupling strategy. The integrated model was validated against measured data from June to August, 2011. The results show that temperature prediction is within the ±1.5°C error band and the RTU electricity energy use prediction is within the ±10% error band. The difference between measured and simulated annual electricity consumption from the refrigeration system is 3%. Based on further analysis and diagnostics, deviations of model predictions from measured data were found to be partially due to the faults in the RTUs. Such deviation accounts for a 4% saving of the total building electrical energy consumption.     

Consumer Attention to an Over‐the‐counter Warning in Four Different Styles of Design

The study consisted of three objectives: (a) to test the relative prominence and conspicuousness of a warning required by US law to be conspicuous; (b) to explore whether or not the conspicuousness of the said warning can be enhanced graphically; and (c) to develop preliminary data for power analysis that would guide decisions related to sample size in future studies. Seventeen subjects viewed four over‐the‐counter drug packages (each with a different style of warning) along with five other products while wearing an eye tracking device. Four styles of warning were used on the over‐the‐counter drug packages: no outline and no fill, outline and no fill, no outline and fill, and outline and fill. The surface area and the placement of the warnings were held constant across all four designs and were consistent with those on commercially available products. Collected data were broken into five zones: warning, brand name, strength, product benefit and net weight. Despite the fact that US law requires it to be conspicuous, the tested warning was significantly less noticeable than the brand name (objective one) for all dependent variables analyzed (α = 0.05). No significant difference was indicated for the varied warning designs (objective two). This could be because not much can be done to enhance prominence when constrained to the limited space that is typically used for such warnings or because of the limited sample size. Power calculations suggest that a sample size of nearly 200 subjects would be required to detect a 2.5 s mean difference at 80% confidence (objective three). Copyright © 2011 John Wiley & Sons, Ltd.     

Modeling without categorical variables: a mixed-integer nonlinear program for the optimization of thermal insulation systems

Optimal design applications are often modeled by using categorical variables to express discrete design decisions, such as material types. A disadvantage of using categorical variables is the lack of continuous relaxations, which precludes the use of modern integer programming techniques. We show how to express categorical variables with standard integer modeling techniques, and we illustrate this approach on a load-bearing thermal insulation system. The system consists of a number of insulators of different materials and intercepts that minimize the heat flow from a hot surface to a cold surface. Our new model allows us to employ black-box modeling languages and solvers and illustrates the interplay between integer and nonlinear modeling techniques. We present numerical experience that illustrates the advantage of the standard integer model.     

Comparison of the TSI Model 3306 Impactor Inlet with the Andersen Cascade Impactor: solution metered dose inhalers

The product performance of a series of solution Metered Dose Inhalers (MDIs) were evaluated using the TSI Model 3306 Impactor Inlet and the Andersen Cascade Impactor (ACI). The goal of the study was to test whether the fine particle and coarse particle depositions obtained using the Model 3306 were comparable to those results obtained by ACI testing. The analysis using the Model 3306 was performed as supplied by the manufacturer as well as with 20 cm and 40 cm vertical extensions that were inserted between the Model 3306 and the USP Inlet. Nine different solution formulations were evaluated. The drug concentrations ranged from 0.08 to 0.8% w/w and the ethanol cosolvent concentration varied between 5 and 20% w/w. In general, it was found that good correlations between the two instruments were obtained. However, for formulations containing 10-20% w/w ethanol it is shown that an extension fitted to the Model 3306 yielded an improved correlation to those obtained from the ACI.     

An address assignment for the automatic configuration of mobile ad hoc networks

Mobile ad hoc networks (MANETs) are infrastructure-less, multi-hop wireless networks, which can be deployed without any pre-existing setup. MANETs are mobile in nature and any node can join and leave the network at any time. Due to mobility, MANETs must be able to configure themselves without human intervention. Configuration (such as address assignment) of a node in such a network is an important issue. In this paper, we present a solution for address assignment, which is distributed in nature and can be used for IP address configuration in MANETs. Each node can allocate the address independent of others. Although our solution uses broadcast messages, results show that by fixing a few parameter values we can reduce the number of broadcast messages. We simulate the protocol and results show that our solution yields better performance those of the earlier algorithms.

Towards a verifiable real-time, autonomic, fault mitigation framework for large scale real-time systems

Designing autonomic fault responses is difficult, particularly in large-scale systems, as there is no single ‘perfect’ fault mitigation response to a given failure. The design of appropriate mitigation actions depend upon the goals and state of the application and environment. Strict time deadlines in real-time systems further exacerbate this problem. Any autonomic behavior in such systems must not only be functionally correct but should also conform to properties of liveness, safety and bounded time responsiveness. This paper details a real-time fault-tolerant framework, which uses a reflex and healing architecture to provide fault mitigation capabilities for large-scale real-time systems. At the heart of this architecture is a real-time reflex engine, which has a state-based failure management logic that can respond to both event- and time-based triggers. We also present a semantic domain for verifying properties of systems, which use this framework of real-time reflex engines. Lastly, a case study, which examines the details of such an approach, is presented.     

Partial-Update L∞ -Norm Based Algorithms

The computational complexity of an adaptive filtering algorithm increases with increasing the filter tap length and therefore, the use of such a filter can become prohibitive for certain applications, especially for real-time implementation. In this paper, we develop low-complexity adaptive filtering algorithms by incorporating the concept of partial updating of the filter coefficients into the technique of finding the gradient vector in the hyperplane based on the L_infin-norm criterion. Two specific partial update algorithms based on the sequential and M-Max coefficient updating are proposed. The statistical analyses of the two algorithms are carried out, and evolution equations for the mean and mean-square of the filter coefficient misalignment as well as the stability bounds on the step size are obtained. It is shown that the proposed partial update algorithm employing the M-Max coefficient updating can achieve a convergence rate that is closest to that of the full update algorithm. Finally, simulations are carried out to validate the theoretical results and study the convergence rate of the proposed algorithms     

High-performance implementation of in-network traffic pacing for small-buffer networks

Demands on data communication networks continue to drive the need for increasingly faster link speeds. Optical packet switching networks promise to provide data rates that are sufficiently high to satisfy the needs of the future Internet core network. However, a key technological problem with optical packet switching is the very small size of packet buffers that can be implemented in the optical domain. Existing protocols, for example the widely used Transmission Control Protocol (TCP), do not perform well in such small-buffer networks. To address this problem, we have proposed techniques for actively pacing traffic at edge networks to ensure that traffic bursts are reduced or eliminated and thus do not cause packet losses in routers with small buffers. We have also shown that this traffic pacing can improve the performance of conventional networks that use small buffers (e.g., to reduce the cost of buffer memory on routers). A key challenge in this context is to develop systems that can perform such packet pacing efficiently and at high data rates. In this paper, we present the design and prototype of a hardware implementation of our packet pacing technique. We discuss and evaluate design trade-offs and present performance results from an prototype implementation based on a NetFPGA fieldprogrammable gate array system. Our results show that traffic pacing can be implemented with few hardware resources and without reducing system throughput. Therefore, we believe that traffic pacing can be deployed widely to improve the operation of current and future networks.