Organic-inorganic nanocomposites of methylcellulose as a precursor of nanocrystalline ZnO layers

In this article, we present a sol-gel method to synthesize hybrid nanocomposite films of Zinc oxide (ZnO)/methylcellulose (MC) on microscope glass slides. The zinc/MC solutions were prepared, using different weight ratios of zinc acetate dihydrate to MC, in the presence of acetic acid. Fourier transform infrared spectroscopy (FTIR) investigation of the Zn sol/MC mixture showed coordinating interaction between zinc ions and MC. Thermal gravimetry analysis (TGA) results showed rapid decomposition of organic compounds in the composites at the temperature range of 200-450 degrees C. The UV-Vis spectroscopy was also utilized to identify ZnO nanoparticles in the MC matrix. The generation of ZnO nanoparticles in the MC matrix was then observed to proceed in situ through the annealing of the gel phase at 200 degrees C. Nanocrystalline films of ZnO/MC were subsequently obtained by the calcinations of ZnO/MC nanocomposites at 550 degrees C. The nanocomposite films were transparent in the visible light and showed a higher energy absorption edge compared with the bulk ZnO. Nanocrystallite sizes of ZnO particles were estimated from scanning electron microscopy (SEM) and the X-ray diffraction (XRD) investigations.     

Corrigendum to the paper ‘Linear Time Varying Model Predictive Control and its Application to Active Steering Systems: Stability Analysis and Experimental Validation’ (International Journal of Robust and Nonlinear Control 2008; 18(8):862–875)

This note is a corrigendum of the paper ‘Linear Time Varying Model Predictive Control and its Application to Active Steering Systems: Stability Analysis and Experimental Validation’, published on the volume 18, issue 8, pages 862–875 of the International Journal of Robust and Nonlinear Control in 2008. Next we point out a technical error in the proof of Lemma 2 of the paper, and provide the corrected version of the lemma. Copyright © 2011 John Wiley & Sons, Ltd.     

Simulation of depth and wind effects on the hydraulic efficiency of sedimentation tanks

In this research, we aim to investigate the effects of the depth and wind effect on the surface of water on the hydraulic efficiency of the sedimentation tanks in water and wastewater treatments plants. A verified two‐dimensional numerical study was performed to evaluate hydraulic performance of series settling tanks by four different depths of 2.5, 3, 3.5 and 4 (m). Wind velocities of 5 and 7 (m/s) in co‐current and counter‐current direction of water flow in sedimentation tank were applied on the surface of the water. In this study, k–ε turbulent model and passive scalar tracer were used to perform the simulations. The research confirms that wind influence on the surface of water causes recirculation zones and increases the length of recirculation zones. In both windy and normal situation, the Real Hydraulic Retention Time and the effective volume of sedimentation tanks increases widely as the depth of the tank.     

Stability analysis of shallow tunnels subjected to eccentric loads by a boundary element method

In this paper, stress behavior of shallow tunnels under simultaneous non-uniform surface traction and symmetric gravity loading was studied using a direct boundary element method(BEM). The existing fullplane elastostatic fundamental solutions to displacement and stress fields were used and implemented in a developed algorithm. The cross-section of the tunnel was considered in circular, square, and horseshoe shapes and the lateral coefficient of the domain was assumed as unit quantity. Double-node procedure of the BEM was applied at the corners to improve the model including sudden traction changes. The results showed that the method used was a powerful tool for modeling underground openings under various external as well as internal loads. Eccentric loads significantly influenced the stress pattern of the surrounding tunnel. The achievements can be practically used in completing and modifying regulations for stability investigation of shallow tunnels.     

Influence of annealing on the electrochemical behavior of finemet amorphous and nanocrystalline alloy

The electrochemical corrosion behavior of finemet alloy at various heat treatment temperatures was investigated. Thermal behavior and structural changes were studied using differential scanning calorimetry and X-ray diffractometry, respectively. The electrochemical corrosion of amorphous and annealed samples was investigated in 0.10 M NaOH solution using electrochemical impedance spectroscopy and linear sweep voltammetery. Changes in morphology of the samples before and after corrosion were characterized using optical microscope. The results showed that structural relaxation and nanocrystallization during the heat treatment improved corrosion behavior of the alloy. The heat-treated alloy at 650 °C showed a corrosion rate of 1.37 × 10⁻⁸ A cm⁻² and a positive shift of +417 mV in the corrosion potential compared to the amorphous alloy. Also, the heat-treated alloy at 650 °C showed a higher charge transfer resistance up to 50 kΩ due to corrosion resistance, compared with amorphous sample that showed a charge transfer resistance of 0.5 kΩ.     

Green synthesis of silver nanoparticles using flower extract of Malva sylvestris and investigation of their antibacterial activity

High‐quality colloidal silver nanoparticles (AgNP) were synthesised via a green approach by using hydroalcoholic extracts of Malva sylvestris. Silver nitrate was used as a substrate ion while the plant extract successfully played the role of reducing and stabilising agents. The synthesised nanoparticles were carefully characterised by using transmission electron microscopy, atomic‐force microscopy, energy dispersive X‐ray spectroscopy, Fourier transform infrared spectroscopy and UV–vis spectroscopy. The maximum absorption wavelengths of the colloidal solutions synthesised using 70 and 96% ethanol and 100% methanol, as extraction solvents, were 430, 485 and 504 nm, respectively. Interestingly, the size distribution of nanoparticles depended on the used solvent. The best particle size distribution belonged to the nanoparticles synthesised by 70% ethanol extract, which was 20–40 nm. The antibacterial activity of the synthesised nanoparticles was studied on Escherichia coli, Staphylococcus aureus and Streptococcus pyogenes using disk diffusion, minimum inhibitory concentrations and minimum bactericidal concentrations assays. The best antibacterial activity obtained for the AgNPs produced by using 96% ethanolic extract.Inspec keywords: silver, nanoparticles, nanofabrication, antibacterial activity, colloids, particle size, transmission electron microscopy, atomic force microscopy, X‐ray chemical analysis, Fourier transform spectra, infrared spectra, ultraviolet spectra, visible spectra, microorganisms, nanomedicine, biomedical materialsOther keywords: Green synthesis, flower extract, Malva sylvestris, antibacterial activity, high‐quality colloidal silver nanoparticles, hydroalcoholic extracts, plant extract, reducing agents, stabilising agents, transmission electron microscopy, atomic‐force microscopy, energy dispersive X‐ray spectroscopy, Fourier transform infrared spectroscopy, UV– vis spectroscopy, colloidal solutions, particle size distribution, Escherichia coli, Staphylococcus aureus, Streptococcus pyogenes, disk diffusion, minimum inhibitory concentrations, minimum bactericidal concentrations assays, ethanolic extract, size 430 nm, size 485 nm, size 504 nm, size 20 nm to 40 nm, Ag     

Producing Ti–6Al–4V/TiC composite with good ductility by vacuum induction melting furnace and hot rolling process

In this paper, Ti–6Al–4V/TiC composite was fabricated by VIM furnace and graphite crucible. X-ray diffraction analysis and EDS techniques were used to identify the phases in the material. Microstructure characteristics of the Ti–6Al–4V/TiC composite were evaluated by means of optical microscopy. The tensile test was performed at room temperature after hot-rolling of the samples in the beta phase field. The results revealed that at different melting times, three kinds of precipitates are formed in the microstructure including grain boundary, eutectic and transgranular precipitates. The size of transgranular precipitates was significantly larger than that of the other two types of carbides and had the worst effect on ductility. Furthermore, an increase in the amount of carbon by increasing the melting time led to an increase in hardness and strength and decrease in ductility. Finally, TiC/Ti–6Al–4V with high strength (∼1200 MPa) and good ductility (10% elongation and 15% reduction in area) was produced in VIM furnace using 0.5 min melting time.     

Flow induced by ependymal cilia dominates near-wall cerebrospinal fluid dynamics in the lateral ventricles

While there is growing experimental evidence that cerebrospinal fluid (CSF) flow induced by the beating of ependymal cilia is an important factor for neuronal guidance, the respective contribution of vascular pulsation-driven macroscale oscillatory CSF flow remains unclear. This work uses computational fluid dynamics to elucidate the interplay between macroscale and cilia-induced CSF flows and their relative impact on near-wall dynamics. Physiological macroscale CSF dynamics are simulated in the ventricular space using subject-specific anatomy, wall motion and choroid plexus pulsations derived from magnetic resonance imaging. Near-wall flow is quantified in two subdomains selected from the right lateral ventricle, for which dynamic boundary conditions are extracted from the macroscale simulations. When cilia are neglected, CSF pulsation leads to periodic flow reversals along the ventricular surface, resulting in close to zero time-averaged force on the ventricle wall. The cilia promote more aligned wall shear stresses that are on average two orders of magnitude larger compared with those produced by macroscopic pulsatile flow. These findings indicate that CSF flow-mediated neuronal guidance is likely to be dominated by the action of the ependymal cilia in the lateral ventricles, whereas CSF dynamics in the centre regions of the ventricles is driven predominantly by wall motion and choroid plexus pulsation.     

Effect of carbon surface oxidation on platinum supported carbon particles on the performance of gas diffusion electrodes for the oxygen reduction reaction

The effect of carbon surface oxidation on platinum supported carbon particles (Pt/C) with nitric acid was investigated by cyclic voltammetry, electrochemical impedance spectroscopy, polarization experiments and chronoamperometry. Cyclic voltammograms, polarization curves and electrochemical impedance spectra showed that the treated catalyst had much larger active surface area and higher ionic conductivity than the untreated catalyst, and provided enhanced performance for oxygen reduction. The formation of acidic groups was examined by IR spectra. The Pt/C surface oxidation had a large effect on the performance of a gas diffusion electrode for oxygen reduction reaction.     

Nanoindentation of isotactic polypropylene: Correlations between hardness,yield stress,and modulus on the local and global scales

The correlations between the hardness, yield stress, and modulus of elasticity of isotactic polypropylene (iPP) were evaluated on the local and global scales. Nanoindentation and traditional macromechanical tests were incorporated for this purpose. Thus, local and global mechanical properties were measured at various temperatures and strain rates. A certain relation was found between the local and global mechanical properties. Moreover, Johnson's model (developed according to the expanding cavity model) was also evaluated at various temperatures and strain rates. The Johnson model was valid only for the yield stresses obtained by nanoindentation and compressive tests and also the elastic modulus obtained via nanoindentation. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011