Intralaminar Damage Model for Laminates Subjected to Membrane and Flexural Deformations

Prediction of transverse damage initiation and evolution for not necessarily symmetric laminates under membrane and/or bending loads is the subject of this work. The laminate stiffness reduction is computed via crack opening displacement (COD) methods and the generalization to multiple cracking laminas is made via continuum damage mechanics (CDM) concepts. Using available COD solutions combined with homogenization techniques leads to an analytical constitutive model capable of predicting the initiation and evolution of crack density versus applied strain, as well as laminate modulus degradation, not only for symmetric laminates subjected to membrane deformation but also for general laminates subjected to flexural deformations as well. To adjust the model parameters, experimental data is required in the form of crack density, or modulus reduction, versus strain for two laminates of the same material system. Then, the model is capable of predicting crack density and modulus degradation for other laminate stacking sequences. The model takes into account crack closure, which is important under flexure, as well as the case of the center lamina straddling the neutral axis. The effect of thermal stresses is incorporated in the formulation.     

High-Order Embedded Finite Difference Schemes for Initial Boundary Value Problems on Time Dependent Irregular Domains

This paper considers a family of spatially discrete approximations, including boundary treatment, to initial boundary value problems in evolving bounded domains. The presented method is based on the Cartesian grid embedded Finite-Difference method, which was initially introduced by Abarbanel and Ditkowski (ICASE Report No. 96-8, 1996; and J. Comput. Phys. 133(2), 1997) and Ditkowski (Ph.D. thesis, Tel Aviv University, 1997), for initial boundary value problems on constant irregular domains. We perform a comprehensive theoretical analysis of the numerical issues, which arise when dealing with domains, whose boundaries evolve smoothly in the spatial domain as a function of time. In this class of problems the moving boundaries are impenetrable with either Dirichlet or Neumann boundary conditions, and should not be confused with the class of moving interface problems such as multiple phase flow, solidification, and the Stefan problem. Unlike other similar works on this class of problems, the resulting method is not restricted to domains of up to 3-D, can achieve higher than 2nd-order accuracy both in time and space, and is strictly stable in semi-discrete settings. The strict stability property of the method also implies, that the numerical solution remains consistent and valid for a long integration time. A complete convergence analysis is carried in semi-discrete settings, including a detailed analysis for the implementation of the diffusion equation. Numerical solutions of the diffusion equation, using the method for a 2nd and a 4th-order of accuracy are carried out in one dimension and two dimensions respectively, which demonstrates the efficacy of the method. This research was supported by the Israel Science Foundation (grant No. 1362/04).     

脉冲堆燃料元件壁温测量热电偶的焊接

脉冲堆燃料元件表面温度测量用的铠装热电偶,其端头部分的套管外径仅为0.25mm。通过对焊接形式、封头工艺及热电偶与燃料元件表面的焊接工艺进行研究比较,采用了脉冲氩弧焊封头、激光点焊焊接的方法。对焊后模拟件进行的各种检验表明,所采用的方法是可行的。     

Range imaging with adaptive color structured light

In range sensing with time-multiplexed structured light, there is a trade-off between accuracy, robustness and the acquisition period. In this paper a novel structured light method is described. Adaptation of the number and form of the projection patterns to the characteristics of the scene takes place as part of the acquisition process. Noise margins are matched to the actual noise level, thus reducing the number of projection patterns to the necessary minimum. Color is used for light plane labeling. The dimension of the pattern space are thus increased without raising the number of projection patterns. It is shown that the color of an impinging light plane can be identified from the image of the illuminated scene, even with colorful scenes. Identification is local and does not rely on spatial color sequences. The suggested approach has been implemented and the theoretical results are supported by experiments     

Usage and perceived effectiveness of fatigue countermeasures for professional and nonprofessional drivers

BackgroundDrivers adopt various strategies in order to cope with fatigue and falling asleep at the wheel. These strategies include a wide range of activities that may invigorate the body and/or the mind.ObjectivesTo compare usage patterns and to evaluate the perceived effectiveness of different coping behaviors adopted by professional and nonprofessional drivers in order to maintain alertness.MethodThe study was conducted using a large-scale survey, filled by 100 professional and 90 nonprofessional drivers.ResultsListening to the radio and opening the window were the most frequently used and also perceived as highly effective coping behaviors by both groups of drivers. Talking on a cellular phone or with a passenger were more frequently used by nonprofessional drivers whereas, planning rest stops ahead, stopping for a short nap and drinking coffee were more frequently used by professional drivers. These methods were also perceived as more effective by professional than by the nonprofessional drivers and their usage frequency highly correlated with their perceived effectiveness.ConclusionsNonprofessional drivers counteract fatigue only at the tactical/maneuvering level of the drive. Hence, they tend to adopt methods that help them pass the time and reduce their feeling of boredom but do not require advance preparations or adjustments in the driving. In contrast, professional drivers counteract fatigue also at the strategic/planning level of driving, and use a much larger repertoire of coping-behaviors.ImplicationsFatigue countermeasures should include all levels of the driving task hierarchy, and experience-based countermeasures used by professional drivers should be considered for experimental validation.     

Agglomerate strength and dispersion of pharmaceutical powders

This study aims to investigate quantitatively the direct correlation between the mechanical strength of powder agglomerates and their dispersion into aerosols by a dry powder inhaler. Agglomerates of mannitol as a model drug-only formulation were prepared by a rolling method followed by exposure to various relative humidity (RH: 55%, 82%, 86% and 90%). The agglomerate strength was obtained from the compression of single agglomerates at a selected speed rate using an Instron testing machine. The dispersion performance (FPF_Loaded) was determined at flow rates of 60 and 100 l min^?1 using an Aeroliser^® coupled to a multistage liquid impinger. Results showed an inverse linear relationship between the agglomerate strength and the dispersion performance. An increase in strength from 3 to 183 kPa resulted in a significant drop (P<0.05) of 18% in the FPF_Loaded. Agglomerates containing ‘solid bridges’ exhibited higher strength (three to eight times) and lower FPF (5–15%, corresponding to 86% and 90% RH) compared to those containing ‘liquid bridges’. These results have provided direct information on the agglomerate strength and its quantitative relationship with powder aerosol performance.     

New Hybrid Materials Based on Modified Halloysite and Unsaturated Polyester Resin

New hybrid materials based on unsaturated polyester resin and modified halloysite with different coupling agents were synthesized. The effect of functional groups grafted on the surface of halloysite against the properties of the final hybrids was studied using different characterization methods. The results of dynamic mechanical analyses showed that the glass transition temperature value of hybrids was strongly influenced by the halloysite modifier type. The concentration of halloysite and the modifier agent type influence the thermal stability of final hybrid materials.     

Improved Practical Attacks on Round-Reduced Keccak

The Keccak hash function is the winner of NIST’s SHA-3 competition, and so far it showed remarkable resistance against practical collision finding attacks: After several years of cryptanalysis and a lot of effort, the largest number of Keccak rounds for which actual collisions were found was only 2. In this paper, we develop improved collision finding techniques which enable us to double this number. More precisely, we can now find within a few minutes on a single PC actual collisions in the standard Keccak-224 and Keccak-256, where the only modification is to reduce their number of rounds to 4. When we apply our techniques to 5-round Keccak, we can get in a few days near collisions, where the Hamming distance is 5 in the case of Keccak-224 and 10 in the case of Keccak-256. Our new attack combines differential and algebraic techniques, and uses the fact that each round of Keccak is only a quadratic mapping in order to efficiently find pairs of messages which follow a high probability differential characteristic. Since full Keccak has 24 rounds, our attack does not threaten the security of the hash function.     

Microalgae-microbial fuel cell (mMFC): an integrated process for electricity generation,wastewater treatment,CO2 sequestration and biomass production

The world today is facing a crisis of energy and environmental pollution. Conventional or photosynthetic microbial fuel cell (MFC) is an advanced “green” energy technology that utilizes living microorganisms to convert biochemical or light energy into electricity through metabolic reaction and photosynthesis, offering a potential solution for the above-mentioned crisis. Further incorporating microalgae into MFC, microalgae-microbial fuel cell (mMFC) integrates electricity generation, wastewater treatment, CO₂ sequestration and biomass production in a single, self-sustainable technology. This review first describes the fundamentals of MFC as well as its applications in treating domestic, municipal, agricultural and industrial wastewaters. Then, mMFC-based configurations and applications with its advantages compared with MFC are explained in particular, together with the parameters governing its performance. Lastly, the opportunities and challenges involved in the development of mMFCs are also explored.