Optimisation of digestion method for determination of arsenic in shrimp paste sample using atomic absorption spectrometry

The microwave digestion method was developed and verified for the determination of arsenic in shrimp paste samples. Experimental design for five factors (HNO₃ and H₂O₂ volumes, sample weight, microwave power and digestion time) were used for the optimisation of sample digestion. For this purpose, two level half factorial design, which involves 16 experiments, was adopted. The concentration of arsenic was analysed by graphite furnace atomic absorption spectrometry. Design Expert® 7.0 software was used to interpret all data obtained. The combination of 2 mL HNO₃ and 1 mL H₂O₂ volumes, 0.1 g sample weight, 1400 W power and 5 min digestion time was found to be the optimum parameters required to digest the shrimp paste samples. Tests with spiked samples presented good recoveries with relative standard deviations between 0.32% and 5.35%.     

MgO single-crystal as an efficient thermal neutron filter

A formula is given which, for neutron energies in the range 10⁻⁴ < E < 10 eV, permits calculation of the nuclear capture, thermal diffuse and Bragg scattering cross-sections as a function of magnesium oxide (MgO) temperature and crystal parameters. Computer program has been developed to calculate the total neutron cross-section and transmission through mono-crystalline MgO. The calculated neutron transmission and effective attenuation coefficient values for MgO-single crystal at different temperatures are compared with measured ones. An overall agreement is indicated between the formula fits and experimental data. A feasibility study for the use of MgO-single crystal is discussed in terms of the optimum MgO-single crystal thickness, mosaic spread, temperature and cutting plane for efficient transmission of thermal-reactor neutrons, and also for rejection of the accompanying fast neutrons and gamma rays.     

Thermo-mechanical properties of polyethylene composites filled with soapstone waste

In this study, soapstone waste originated from craftsmanship activities was used as an alternative filler (0–30 wt%) for a high-density polyethylene (PE) matrix. The aim of this paper is to understand the effect of the filler particles on crystallinity, thermal stability and thermo-mechanical properties of this newly developed composite material. Physico-chemical characterization was performed by x-ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectroscopy. Thermogravimetric analysis (TGA), oxidation induction time (OIT) and dynamic mechanical thermal analysis (DMA) were performed to assess the effect of the filler on the themo-mechanical properties of PE. Thermal stability, measured by TGA, was enhanced, while OIT values reduced with filler content. A significant increase on the storage modulus of the composites (up to 148% in comparison with unfilled PE) was observed and this reinforcing effect was even more prominent at higher temperatures. XRD analysis revealed that the degree of crystallinity improved significantly with soapstone loading, which explains the substantial increase in stiffness observed. Increased crystallinity is also associated with higher strength, reduced residual stress, and better dimensional stability of end products, which can be particularly attractive for pressure pipe applications.     

New Feedback Architecture for VCO-Based Delta-Sigma ADCs Utilizing Phase Shifter

The voltage controlled oscillator-based （VCO-based） continuous-time delta-sigma （CTDS） analog to digital converter （ADC） suffers from nonlinearity and mismatch in its feedback network. A new feedback network consisting of a phase shifter is proposed. The phase shifter replaces the digital to analog converter （DAC） in the proposed architecture. Feasibility of the proposed idea is discussed and its higher performance is illustrated through a behavioral simulation approach （CppSim）. We have also developed the phase shifter as a variable all-pass filter in the C language. The nonlinearity and mismatch of the system caused by DAC is mitigated, resulting in higher signal to noise ratio （SNR） and signal to noise and distortion ratio （SNDR）, respectively.     

Effect of separate pod and root zone temperatures on yield and seed composition of three Spanish cultivars of groundnut (Arachis hypogaea L)

The effect of separate pod and root temperature regimes (all four combinations of 28/22 and 40/34 °C day/night temperature), imposed from the time of peg penetration until harvest, on yield and seed composition of three Spanish genotypes of groundnut (Arachis hypogaea L) was investigated. A decrease in pod temperature from 40/34 to 28/22 °C increased yield and oil, starch and protein mass per plant irrespective of root temperature. Additionally, a reduction in pod temperature decreased protein concentration and increased the sum of oil and starch concentration at a root temperature of 28/22 °C, whereas at a root temperature of 40/34 °C a decrease in pod temperature increased protein concentration. Root temperature reduction diminished oil concentration of genotypes AH 6179 and TMV 2 at a pod temperature of 40/34 °C. A decline in pod temperature affected fatty acid composition through a decrease in palmitic acid irrespective of root temperature and an increase in linoleic acid at a root temperature of 28/22 °C. A root temperature effect on fatty acid composition was not detected. It is concluded that field management practices and choice of genotype can influence groundnut yield and seed composition through effects on pod and root temperature. © 2001 Society of Chemical Industry     

Histological assessment of follicular delivery of flutamide by solid lipid nanoparticles: potential tool for the treatment of androgenic alopecia

Abstract

Context: Flutamide is a potent anti-androgen with the several unwanted side effects in systemic administration, therefore, it has attracted special interest in the development of topically applied formulations for the treatment of androgenic alopecia.

Objective: The purpose of this study was to prepare and characterize the solid lipid nanoparticles (SLNs) of Flutamide for follicular targeting in the treatment of the androgenic alopecia.

Methods: Flutamide-loaded SLNs, promising drug carriers for topical application were prepared by hot melt homogenization method. Drug permeation and accumulation in the exercised rat skin and histological study on the male hamsters were performed to assess drug delivery efficiency in vitro and in vivo, respectively.

Results: The optimized Flutamide-loaded SLNs (size 198?nm, encapsulation efficiency percentage 65% and loading efficiency percentage 3.27%) exhibited a good stability during the period of at least 2 months. The results of X-ray diffraction showed Flutamide amorphous state confirming uniform drug dispersion in the SLNs structure. Higher skin drug deposition (1.75 times) of SLN formulation compared to Flutamide hydroalcoholic solution represented better localization of the drug in the skin. The in vivo studies showed more new hair follicle growth by utilizing Flutamide-loaded SLNs than Flutamide hydroalcoholic solution which could be due to the higher accumulation of SLNs in the hair follicles as well as slowly and continues release of the Flutamide through the SLNs maximizing hair follicle exposure by antiandrogenic drug.

Conclusion: It was concluded Flutamide-loaded SLN formulation can be used as a promising colloidal drug carriers for topical administration of Flutamide in the treatment of androgenic alopecia.     

Sustainable GQDs for potential application in engineering using corn powder as green precursor

Abstract

An alternative way to produce Graphene Quantum Dots (GQDs) economically is proposed in this study where corn powder was used as a green precursor to fabricate GQDs in a hassle less one-step route. These GQDs showed a stable, size-dependent in aqueous solution. The size of GQDs obtained from this work is approximately measure from 0.21 to 5.20?nm. The XRD patterns showed a broad peak at 22?Å. Furthermore, the UV-vis absorption spectrum has a broad peak around the range of 250–350?nm which is ascribed to the typical absorption of n-π* transition of the carbonyl groups. The said sample also exhibited bright green photoluminescence under an UV light. The Raman spectra displayed a D band around 1375?cm^?1 and G band around 1578?cm^?1. The performed analysis confirms that the GQDs by this method has a similar result compared to the other methods. This suggests that corn powder as a precursor can be used to fabricate GQDs in a simplistic and environment-friendly way for potential application in sensors, very large scale integration and energy generation technology.     

Aircraft engine bleed system tubes: Material and failure mode analysis

The failures of T-ducts made of Ti A40 with 50 mm in diameter and 0.52 mm in thickness, used in the pneumatic system of a commercial aircraft, are examined as part of a research program aimed to improve the development of such systems. The investigation included the fractographic analysis of the burst parts, microstructure and internal duct surface observations and mechanical tests performed in samples taken from the failed ducts and from unused material. The failed duct fracture surfaces showed typical features of transgranular fatigue cracking. Delamination and oxide particle deposits were found in their internal surfaces. Tensile and fatigue tests revealed some effects of aging, but with no evidence of embrittlement. The fracture mechanisms were the same for the failed ducts and for the unused material. The internal surface damage, associated to the geometry of the duct and to the solid-solution hardening increases the local stress concentration. These facts suggest that cracks had initiated at multiple sites around the inside surface, so that further increments of cracking occurred on subsequent cyclic pressurization during service life until the occurrence of sudden final fast fracture.     

Zero-Voltage Transition Current-Fed Full-Bridge PWM Converter

In this paper, a new zero-voltage transition current-fed full-bridge converter with a simple auxiliary circuit is introduced for high step-up applications. In this converter, for the main switches, zero-voltage switching condition is achieved at wide load range. Furthermore, all semiconductor devices of the employed simple auxiliary circuit are fully soft switched. The proposed converter is analyzed and a prototype is implemented. The experimental results presented confirm the validity of the theoretical analysis. Finally, the proposed auxiliary circuit is applied to other current-fed topologies such as current-fed push-pull and half-bridge converters to provide soft switching.     

Analysis and design of a high efficiency bidirectional DC–DC converter for battery and ultracapacitor applications

This paper presents a high efficiency non-isolated bidirectional converter which can be employed as an interface circuit between ultracapacitors or batteries and DC bus voltage. All semiconductor devices in the proposed converter are soft switched while the control circuit remains PWM. So, the energy conversion through the converter is highly efficient. The proposed converter acts as a zero-voltage transition (ZVT) buck to charge an ultracapacitor or battery and acts as a ZVT boost to discharge an ultracapacitor or battery. The performance of the proposed converter with respect to abrupt load and operating mode change is shown through computer simulation results. The results confirm the aforementioned advantages and features of the proposed converter.