Synthesis and characterization of nanostructured CaSiO3 biomaterial

Here we report a successful preparation of nanostructured calcium silicate by wet chemical approach. The synthesized sample was characterized by various physico-chemical methods. Thermal stability was investigated using thermo-gravimetric and differential thermal analysis (TG-DTA). Structural characterization of the sample was carried out by the X-ray diffraction technique (XRD) which confirmed its single phase hexagonal structure. Transmission electron microscopy (TEM) was used to study the nanostructure of the ceramics while homogeneous grain distribution was revealed by scanning electron microscopy studies (SEM). The elemental analysis data obtained from energy dispersive X-ray spectroscopy (EDAX) were in close agreement with the starting composition used for the synthesis. Superhydrophilic nature of CaSiO₃ was investigated at room temperature by sessile drop technique. Effect of porous nanosized CaSiO₃ on early adhesion and proliferation of human bone marrow mesenchymal stem cells (BMMSCs) and cord blood mesenchymal stem (CBMSCs) cells was measured in vitro. MTT cytotoxicity test and cell adhesion test showed that the material had good biocompatibility and promoted cell viability and cell proliferation. It has been stated that the cell viability and proliferation are significantly affected by time and concentration of CaSiO₃. These findings indicate that the CaSiO₃ ceramics has good biocompatibility and that it is promising as a biomaterial.     

Effect of Heat Treatment on Mechanical Properties and Corrosion Performance of Cold-Sprayed Tantalum Coatings

The cold-spray technique is of significant interest to deposit refractory metals with relatively high melting point for a variety of demanding applications. In the present study, mechanical properties of cold-sprayed tantalum coatings heat treated at different temperatures were investigated using microtensile testing, scratch testing, and nanoindentation. The corrosion performance of heat-treated coatings was also evaluated in 1 M KOH solution, and potentiodynamic polarization as well as impedance spectroscopy studies were carried out. Assessment of structure–property correlations was attempted based on microstructure, porosity, and intersplat bonding state, together with mechanical and corrosion properties of the heat-treated cold-sprayed tantalum coatings. Coatings annealed at 1500 °C, which is very close to the recrystallization temperature of tantalum, were found to perform almost as bulk tantalum, with exciting implications for various applications.     

Reduced Maternal Erythrocyte Long Chain Polyunsaturated Fatty Acids Exist in Early Pregnancy in Preeclampsia

The present prospective study examines proportions of maternal erythrocyte fatty acids across gestation and their association with cord erythrocyte fatty acids in normotensive control (NC) and preeclamptic pregnancies. We hypothesize that maternal fatty acid status in early pregnancy influences fetal fatty acid stores in preeclampsia. 137 NC women and 58 women with preeclampsia were included in this study. Maternal blood was collected at 3 time points during pregnancy (16–20th weeks, 26–30th weeks and at delivery). Cord blood was collected at delivery. Fatty acids were analyzed using gas chromatography. The proportions of maternal erythrocyte α‐linolenic acid, docosahexaenoic acid, nervonic acid, and monounsaturated fatty acids (MUFA) (p < 0.05 for all) were lower while total n‐6 fatty acids were higher (p < 0.05) at 16–20th weeks of gestation in preeclampsia as compared with NC. Cord 18:3n‐3, 22:6n‐3, 24:1n‐9, MUFA, and total n‐3 fatty acids (p < 0.05 for all) were also lower in preeclampsia as compared with NC. A positive association was observed between maternal erythrocyte 22:6n‐3 and 24:1n‐9 at 16–20th weeks with the same fatty acids in cord erythrocytes (p < 0.05 for both) in preeclampsia. Our study for the first time indicates alteration in maternal erythrocyte fatty acids at 16th weeks of gestation which is further reflected in cord erythrocytes at delivery in preeclampsia.     

Interaction dynamics of a spherical particle with a suspended liquid film

Hydrodynamics of collision interactions between a particle and gas‐liquid interface such as droplet/film is of keen interest in many engineering applications. The collision interaction between a suspended liquid (water) film of thickness 3.41 ± 0.04 mm and an impacting hydrophilic particle (glass ballotini) of different diameters (1.1–3.0 mm) in low particle impact Weber number ( ) range (1.4–33) is reported. Two distinct outcomes were observed—particle retention in the film at lower Weber number and complete penetration of the film toward higher Weber number cases. A collision parameter was defined based on energy balance approach to demarcate these two interaction regimes which agreed reasonably well with the experimental outcomes. It was shown that the liquid ligament forming in the complete penetration cases breaks up purely by “dripping/end pinch‐off” mechanism and not due to capillary wave instability. An analytical model based on energy balance approach was proposed to determine the liquid mass entrainment associated with the ligament which compared well with the experimental measurements. A good correlation between the %film mass entrained and the particle Bond number ( ) was obtained which indicated a dependency of Bo^1.72. Computationally, a three‐dimensional CFD model was developed to simulate these interactions using different contact angle boundary conditions which in general showed reasonable agreement with experiment but also indicated deficiency of a constant contact angle value to depict the interaction physics in entirety. The computed force profiles from computational fluid dynamics (CFD) model suggest dominance of the pressure force over the viscous force almost by an order of magnitude in all the Weber number cases studied. © 2015 American Institute of Chemical Engineers AIChE J, 62: 295–314, 2016     

Freestanding fiber mats of zeolitic imidazolate framework 7 via one‐step,scalable electrospinning

We demonstrated the fabrication of freestanding zeolitic imidazolate framework 7 (ZIF‐7) nanofiber (NF) mats by means of one‐step, scalable electrospinning. The formation of ZIF‐7 nanoparticles embedded in polymer fibers was unambiguously pinpointed via X‐ray diffraction, transmission electron microscopy, and adsorption studies. The NF mats exhibited excellent characteristics, with an average diameter of 245 nm, in the adsorption and desorption of carbon dioxide (CO₂); this makes them attractive candidates for gas separation and other selective filtration applications. This excellent property of the ZIF‐7 mats was explained by the gate‐opening phenomenon of ZIF‐7, which yielded a stepwise increase in the overall CO₂ uptake capacity. The mechanical strength of the NF mats was also obtained via large‐strain uniaxial tensile deformation, which enabled preliminary assessment of the mat's suitability for textiles and membranes in targeting separation and filtration applications with large‐area permeability. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43788.