Interface structure of diffusion bonded duplex stainless steel and medium carbon steel couple

Diffusion bonding of duplex stainless steel to medium carbon steel was carried out with different temperatures for sound bonds. In the bonding process, relatively intermediate temperatures such as 750, 800, 850 and 900 °C were used with a bonding time of 30 min. In this study, microstructural changes and mechanical properties in the interface region of duplex stainless steel and medium carbon steel couples were determined. The results showed that, in interface region, Cr₂₃C₆ was formed on the stainless steel side, while ferrite formation was observed on the carbon steel side as a result of mutual diffusion of C and Cr.     

Effects of environmental factors on the adhesion and durability characteristics of epoxy-bonded concrete prisms

This work is concerned with the effects of environmental factors on the adhesion and durability characteristics of epoxy-bonded concrete prisms. The results indicate that the presence of liquid water at the interfacial zone during the epoxy injection process disrupts the initial bond configurations. The freezing and thawing up to about 40 cycles do not have a significant effect on the bond stability. An adequate degree of chemical stability is maintained in the bond line by the epoxy adhesives after 120 days of exposure to corrosive environments such as MgSO₄ and MgCl₂. However, there is a pronounced effect of these chemical substances on the concrete strength. The load-bearing capacity of epoxy-bonded concrete prisms decreases with increasing temperature. Despite this fact, the EP3-bonded concrete prisms give relatively high joint strengths at temperatures up to 100 °C.     

A parametric study on the factors affecting the froth floatation of Jordanian tar sand utilizing a fluidized bed floatator

Different parameters affecting the behavior of froth flotation of Jordanian tar sand, obtained from the Dead Sea area, were studied. This study was performed in a modified fluidized bed floatator. The effects of the addition of a flotation agent, NaOH, temperature and flotation time on the beneficiation of bitumen in the froth were investigated. It was found that the beneficiation factor in the froth increased with the increase of temperature and flotation time. However, the amount of base (NaOH) and the flotation agent were found to have a negative effect on that factor. A regression model based on a full factorial experimental design results was obtained with a significant correlation coefficient. The optimum beneficiation factor was found to be 7.2 and the bitumen content in the froth was found to be 79% in the froth, which was obtained at 0.2 gNaOH/L, zero agent, 80 °C, and 30 min.     

A quasi-static analysis for a class of induced-current EIT systems using discrete coils

A discrete coil EIT system is investigated for the general case of an eccentric circular inhomogeneity. The solution methodology of the forward problem of this system is explained. An optimization procedure using this forward problem solution is developed to find optimum currents that maximize the distinguishability. For an eccentric inhomogeneity problem, it is shown that the coil currents can be optimized to focus the current density in a region of interest. Optimum coil currents under limited peak coil currents constraint and limited total power constraint are obtained. Representative examples that demonstrate the performance of the system are presented.     

Communication—Processor Tradeoffs in a Limited Resources PRAM

We consider a simple restriction of the PRAM model (called PPRAM), where the input is arbitrarily partitioned between a fixed set of p processors and the shared memory is restricted to m cells. This model allows for investigation of the tradeoffs/ bottlenecks with respect to the communication bandwidth (modeled by the shared memory size m ) and the number of processors p . The model is quite simple and allows the design of optimal algorithms without losing the effect of communication bottlenecks. We have focused on the PPRAM complexity of problems that have $\tilde{O}$ (n) sequential solutions (where n is the input size), and where m ≤ p ≤ n . We show essentially tight time bounds (up to logarithmic factors) for several problems in this model such as summing, Boolean threshold, routing, integer sorting, list reversal and k -selection. We get typically two sorts of complexity behaviors for these problems: One type is $\tilde{O}$ (n/p + p/m) , which means that the time scales with the number of processors and with memory size (in appropriate ranges) but not with both. The other is $\tilde{O}$ (n/m) , which means that the running time does not scale with p and reflects a communication bottleneck (as long as m < p ). We are not aware of any problem whose complexity scales with both p and m (e.g. $O(n/\sqrt{m \cdot p})$ ). This might explain why in actual implementations one often fails to get p -scalability for p close to n .     

On the revision of probabilistic beliefs using uncertain evidence

We revisit the problem of revising probabilistic beliefs using uncertain evidence, and report results on several major issues relating to this problem: how should one specify uncertain evidence? How should one revise a probability distribution? How should one interpret informal evidential statements? Should, and do, iterated belief revisions commute? And what guarantees can be offered on the amount of belief change induced by a particular revision? Our discussion is focused on two main methods for probabilistic revision: Jeffrey's rule of probability kinematics and Pearl's method of virtual evidence, where we analyze and unify these methods from the perspective of the questions posed above.     

Virtual‐machine‐based heterogeneous checkpointing

Checkpointing an application is the act of saving the application's state during its execution on stable storage, so that if the application fails it can be restarted from the last saved state, thereby avoiding loss of the work that was already done. A heterogeneous checkpoint/restart mechanism allows one to restart an application on a possibly different hardware architecture and/or operating system than those in which the application was saved. This paper explores how to construct such a mechanism at the virtual machine level. That is, rather than dumping the entire state of the application process, the mechanism reported here dumps the state of the application as maintained by a virtual machine. During restart, the saved state is loaded into a new copy of the virtual machine, which continues running from there. The heterogeneous checkpoint/restart mechanism reported here was developed for the OCaml variant of ML. The paper reports on the main issues encountered in building such a mechanism and the design choices made, presents performance evaluations, and discusses some lessons and ideas for extending the work to native code OCaml and Java. Copyright © 2002 John Wiley & Sons, Ltd.     

Hydrodynamic effects on flow through screens at intakes

The effect of fish protective screens placed at an angle less than 90° to the flow was investigated. The effect of the approach velocity, wire area and the screen angle were considered. Mathematical equations were developed for determining the pressure drop coefficient and the angle of the flow downstream from the screen. It was found that these parameters depend primarily on the variables considered and on the drag coefficient. This finding is important for design considerations of intakes with this type of fish screen arrangement.     

The burden of injuries in the Philippines: implications for national research policy

Injuries cause 10% of the mortality and 15% of disability worldwide. However, there is a paucity of data on injuries in the developing world where two-thirds of all injury deaths occur. This is the first published report characterizing the overall problem of injuries in the Philippines, a developing country in southeast Asia. This report defines the burden of injuries in the Philippines and identifies priority areas for the national health research agenda. A systematic review of 35 years of published and unpublished data on injuries in the Philippines (1960–1995) was conducted. Injury fatality rates increased by 196% from 14.3 per 100,000 in 1960 to 42.3 per 100,000 in 1995, and one in 11 deaths in the Philippines are due to injuries. Intentional injuries account for 48% of all injury deaths and motor vehicle crashes for 15%. For 15–44 year old males, injuries account for 42% of all deaths, 67% of which are intentional. The proportion of all deaths attributable to intentional injuries has increased by 925% and that of motor vehicle crashes by 600% from 1960 to 1995. Improvements in injury surveillance and documentation of non-fatal injury outcomes are needed. Research into risk factors and potential interventions for the prevention of intentional injuries should be a priority in the Philippines.