Experimental determination of the energy dependence of defect production

A knowledge of primary damage production as a function of recoil energy is essential for predicting defect production in radiation environments of practical interest. The damage function $\text{ν(T)}$, i.e., the number of Frenkel pairs as a function of recoil energy, is determined for Cu from electron and ion damage-rate measurements. $\text{ν(T)}$ shows a plateau at $\text{ν = 0.54}$ which extends up to ~ $\text{7T}{}_{\mathrm{d}}{}^{\min }$. Therefore, simple damage models, such as the modified Kinchin-Pease expression, are strongly deficient, not only at high recoil energies where stimulated recombination in cascades reduces defect production, but also in the single displacement regime. As a consequence, no simple relation between $\text{T}{}_{\mathrm{d}}{}^{\min }$ and $\text{T}{}_{\mathrm{d}}{}^{\mathrm{av}}$ is expected to exist. A procedure is suggested which uses anisotropy measurements in combination with polycrystal electron and ion irradiations to construct absolute damage functions in metals.     

Heavy-section steel technology program: Intermediate-scale pressure vessel tests

Eight flawed 990-mm-OD, 152-mm-thick vessels of ASTM A508 class 2 forging steel or A533, grade B, class 1 steel plate have been pressurized hydraulically to burst or rupture. The rupture test of one vessel (V-7) was repeated pneumatically to study the effects of the sustained load thus attainable. Test temperatures ranged from 0 to 91°C so that transitional to upper shelf fracture toughness behavior was observed. Pretest predictions of failure pressure were based on tensile and toughness properties determined from Charpy-size to 102-mm-thick specimens representative of the test vessels. Linear elastic fracture mechanics based on strain and plastic instability analyses were generally adequate for determining the failure pressure, which ranged from 2.15 to 3.28 times design pressure.     

Laser structuring for back junction silicon solar cells

We demonstrate mask‐free fabrication of a 22·0%‐efficient crystalline Si solar cell by applying laser ablation of Si and by laser ablation of protective coatings. The bulk absorber material is a p ‐type float zone silicon wafer and the designated cell area is 4 cm². While the processing time of our laboratory‐type of laser system is far too slow for industrial processing, we estimate on the basis of our experiments that laser processing of 12·5 × 12·5 cm²‐sized solar cells in just a few seconds is feasible with commercially available equipment. Copyright © 2006 John Wiley & Sons, Ltd.     

Hydrothermal treatments of two cowpea (Vigna unguiculata L. Walp) varieties: effect of micronisation on physicochemical and structural characteristics

The effects of a hydrothermal treatment consisting of tempering (to 41% moisture) and heating to 153 °C (micronisation) on the structural and physicochemical characteristics of two cowpea varieties were studied. The untreated varieties had similar cooking times, although cooked Bechuana white cowpeas were significantly (P ≤ 0.05) softer and had a higher incidence of splitting than Var. 462 cowpeas. This may be due in part to differences in cotyledon structure affecting water uptake during cooking. The hydrothermal treatment changed the physical structure and chemical properties of the cowpea seeds. This led to significant (P ≤ 0.05) reductions in the cooking time of micronised Bechuana white and Var. 462 cowpeas, by 47 and 36% respectively, as compared with control samples. Micronisation caused physical fissuring of the seed coat and cotyledon and significantly (P ≤ 0.05) reduced the bulk density of treated seeds. These changes in the physical structure significantly (P ≤ 0.05) improved the initial water uptake during soaking and cooking, increased the enzyme‐susceptible starch and reduced the protein solubility and hydration capacity of the cowpea seeds. Cooked (60 min) micronised cowpeas also had significantly (P ≤ 0.05) more splits and a significantly (P ≤ 0.05) softer texture than control samples. Copyright © 2005 Society of Chemical Industry     

Fungi associated with Indonesian dried fish

The mycoflora of dried salted fish from Indonesia was studied, with emphasis on visibly spoiled fish and spoilage fungi. A total of 364 isolates from 74 fish were cultured and identified. The most prevalent fungus was a previously undescribed species, now named Polypaecilum pisce, which was isolated from 42% of the fish examined, in extreme cases appearing as conspicuous white growth over large areas of the fish surface. Other frequently isolated species were Eurotium rubrum (35%), E. repens (26%), E. amstelodami (22%), E. chevalieri (18%), Aspergillus niger (37%), A. flavus (27%), A. sydowii (23%), A. penicilloides (16%) and A. wentii (15%). A variety of Penicillium species and species from 17 other genera were isolated less frequently.     

Quality Improvement of Fresh-Cut Endive (<Emphasis Type="Italic">Cichorium endivia</Emphasis> L.) and Recycling of Washing Water by Low-Dose UV-C Irradiation

Superficial short-wavelength ultraviolet (UV-C) treatment (1.2 kJ/m²) of fresh-cut endive was combined with conventional cold (4 °C, 120 s) and innovative warm (45 °C, 120 s) water washing prior to and after irradiation in order to improve its microbial and sensory quality including physiological properties. UV-C doses applied exerted only minor physiological stress on the plant tissue, irrespective of the washing procedure as indicated by largely unaltered headspace gas compositions, chlorophyll fluorescence maximum quantum yields (F _v/F _m), and retention of chlorophylls and β-carotene. Independent of the washing procedure applied, phenylalanine ammonia-lyase (PAL), polyphenol oxidase (PPO), and peroxidase (POD) activities were slightly inhibited by UV-C irradiation. As a result of UV-C irradiation, significantly improved microbiological and sensory quality was retained during the entire storage period, particularly, when applied after washing. Being applicable in organic fresh-cut production, UV-C represents a valuable alternative to chlorine application to washing water. The most efficient decontamination (2.1 log₁₀ units) of fresh-cut endive was achieved by combining warm water washing with subsequent UV-C irradiation. Furthermore, when UV-C lamps were integrated into the water tank of a continuous industrial washing machine, the microbial loads of the process water were also significantly lowered. Accordingly, in-line UV-C decontamination of process water may be instrumental in minimizing both fresh water consumption and the risk of cross-contamination.     

Optimization of the sorghum malting process for pito production in Ghana

Pito is an alcoholic beverage obtained through a yeast (Saccharomyces cerevisiae) fermentation of wort extracted from sorghum (Sorghum bicolor L. Moench) malt. The malting conditions of sorghum are thought to influence the quality characteristics of the malt, and subsequently the quality of the pito obtained from it. Studies were carried out on a local sorghum cultivar grown in Ghana – chireh, to optimize the conditions for malting conditions for pito production in Ghana. A 3³ full factorial experimental design was replicated with steeping times of 12, 16 and 22 h, germination times of 3, 4 and 5 days, and malt drying temperatures of 30, 40 and 50 °C as factors. Diastatic power, extract yield, attenuation limit and free amino nitrogen were determined. Germination duration significantly affected diastatic power and free amino nitrogen (p < 0.001). Extract yield was also significantly influenced by germination duration (p = 0.001). The germination time, steeping time and drying temperature had no significant effect on the attenuation limit. The optimal conditions for malting this specific cultivar grown in Ghana to obtain critical malt quality indices are 12.0–12.5 h steeping, 5 days of germination at 30 °C and drying at 40 °C. Free amino nitrogen levels in all treatments were higher than the minimum requirement for good yeast nutrition and fermentation. Copyright © 2015 The Institute of Brewing & Distilling     

Diagnosis of gallstone ileus

Gallstone ileus is a rare disorder, which, because it is often misdiagnosed preoperatively, may become life-threatening. The classic triad of Rigler (aerobilia, small bowel ileus and a calcified, dystopic stone) is visualized on abdominal plain films in only 14-35% of cases. Further work-up includes ultrasound, upper gastrointestinal series with water soluble contrast medium and computed tomography (CT). CT is especially reliable in demonstrating all three criteria.