RFID Transponder Collision Control Algorithm

Transponder collision problem can be significant when a large number of RFID (radio frequency identification) transponders exist in field. Most existing anti-collision algorithms can solve this problem. However, problem arises when all or part of these transponders are having identical UID (unique identification). This paper proposes a new transponder collision control algorithm to overcome overlapping that occurs among transponders with identical UID in RFID large scale deployment (e.g., in a large warehouse), so that the RFID reader can successfully identify the quantity of transponders for each particular UID with high identification accuracy. The proposed anti-collision algorithm adopts a modified version of frequency domain method by adding stochastic delays in time domain. The obtained results show that the proposed method can achieve optimum frequency bandwidth utilization and at the same time poses high identification accuracy (almost 100%) with low identification delay.     

Generation of Generalized Impedance Converter Circuits Using NAM Expansion

The generation of the voltage generalized impedance converter (VGIC) circuits using a nodal admittance matrix (NAM) expansion is given in detail. Thirty-two equivalent circuits using current conveyors (CCII) or inverting current conveyors (ICCII) or a combination of both are generated. The reported circuits are suitable for realizing inductors or frequency dependent negative resistors (FDNR) using grounded passive elements. Similarly the generation of the current generalized impedance converter (CGIC) circuits published recently is reexamined and this resulted in 16 more new CGIC circuits using an alternative NAM expansion. Modification of two of the generated circuits to realize a floating inductor or floating FDNR is also given together with Spice simulation results.     

A Behavioral Model of MEMS Convective Accelerometers for the Evaluation of Design and Calibration Strategies at System Level

This paper presents a behavioral model that can be used to improve the manufacturability of systems based on MEMS convective sensors. This model permits to handle faults related to process scattering, taking into account not only the electrical and lateral geometrical parameters but also the influence of the cavity depth. Moreover correlations between conductive and convective phenomena are included. The model is validated with respect to FEM simulations and a very good agreement is obtained between the behavioral model and FEM results. The proposed model can then be used in system-level simulations, for instance to evaluate the impact of process scattering on the performances of the sensing part and/or to investigate different design and calibration strategies with respect to the system robustness.     

Multiwavelength erbium-doped fiber Fabry-Pe/spl acute/rot laser and its uniform spectral lines power operation

Multiwavelength erbium-doped fiber laser by means of phase modulation in a linear cavity configuration is presented. Stable multiwavelength lasing is achieved by applying any one of the waveforms of sine, square, sawtoothed, and triangular at a suitable frequency between 500 Hz to a few tens of kilohertz to the phase modulator. The output spectral lines power equalization is performed by adjusting the frequency to drive the all-fiber phase modulator and the polarization controller or dc offset voltage of a LiNbO/sub 3/ amplitude modulator, which is incorporated in a polarization-maintaining fiber Lyot-Sagnac filter.     

A New Adaptive Beamforming of Multiband Fractal Antenna Array in Strong-Jamming Environment

This paper proposes, for the first time, a new radiation pattern synthesis for fractal antenna array that combines the unique multi-band characteristics of fractal arrays with the adaptive beamforming requirements in wireless environment with high-jamming power. In this work, a new adaptive beamforming method based on discrete cbKalman filter is proposed for linear Cantor fractal array with high performance and low computational requirements. The proposed Kalman filter-based beamformer is compared with the Least Mean Squares (LMS) and the Recursive Least Squares (RLS) techniques under various parameter regimes, and the results reveal the superior performance of the proposed approach in terms of beamforming stability, Half-Power Beam Width (HPBW), maximum Side-Lobe Level (SLL), null depth at the direction of interference signals, and convergence rate for different Signal to Interference (SIR) values. Also, the results demonstrate that the suggested approach not only achieves perfect adaptation of the radiation pattern synthesis at high jamming power, but also keep the same SLL at different operating frequencies. This shows the usefulness of the proposed approach in multi-band smart antenna technology for mobile communications and other wireless systems.

     

Hybrid wavelet measurement matrices for improving compressive imaging

Compressive sensing principle claims that a compressible signal can be recovered from a small number of random linear measurements. However, the design of efficient measurement basis in compressive imaging remains as a challenging problem. In this paper, a new set of hybrid wavelet measurement matrices is proposed to improve the quality of the compressive imaging, increase the compression ratio and reduce the processing time. The performance of these hybrid wavelet matrices for image modeling and reconstruction is evaluated and compared with other traditional measurement matrices such as the random measurement matrices, Walsh and DCT matrices. The compressive imaging approach chosen in this study is the block compressive sensing with smoothed projected Landweber reconstruction technique. The simulation results indicate that the imaging performance of the proposed hybrid wavelet measurement matrices is approximately 2–3 dB better than that obtained using Gaussian matrix especially at higher compression ratios.     

An effective back‐off selection technique for reliable beacon reception in VANETs

In safety‐critical scenarios, reliable reception of beacons transmitted by a subject vehicle is critical to avoid vehicle collision. According to the employed contention window sizes in IEEE 802.11p, beacons are transmitted with a small contention window size. As a result, multiple vehicles contend for the shared channel access by selecting the same back‐off slot. This is a perfect recipe for synchronous collisions wherein reliable beacon delivery cannot be guaranteed for any vehicle. We consider the problem of selecting the back‐off slots from the current contention window to provide reliable delivery of beacons transmitted by a subject vehicle to its neighbors. Given a safety scenario, we propose a Pseudo‐Random Number Generator (PRNG)‐inspired back‐off selection (PBS) technique. The proposed technique works on the hypothesis that synchronous collisions of beacons transmitted by a subject vehicle can be reduced if all its neighbors select different back‐off slots (ie, not the back‐off slot selected by the subject vehicle). The discrete‐event simulations demonstrate that PBS can increase the overall message reception from a subject vehicle, in comparison with the uniform random probability back‐off selection in IEEE 802.11p.     

Single-stage three-phase boost power factor correction circuit for AC–DC converter

This article presents a single-stage three-phase power factor correction (PFC) circuit for AC-to-DC converter using a single-switch boost regulator, leading to improve the input power factor (PF), reducing the input current harmonics and decreasing the number of required active switches. A novel PFC control strategy which is characterised as a simple and low-cost control circuit was adopted, for achieving a good dynamic performance, unity input PF, and minimising the harmonic contents of the input current, at which it can be applied to low/medium power converters. A detailed analytical, simulation and experimental studies were therefore conducted. The effectiveness of the proposed controller algorithm is validated by the simulation results, which were carried out using MATLAB/SIMULINK environment. The proposed system is built and tested in the laboratory using DSP-DS1104 digital control board for an inductive load. The results revealed that the total harmonic distortion in the supply current was very low. Finally, a good agreement between simulation and experimental results was achieved.     

Tensor-based methods for high-power amplifier identification and predistortion linearization

Aligned with the recent revolution of smart cities concept, a lot of work has been done to support the education process in direct or indirect way. In countries like Lebanon, in which the choice of school does not depend on the residence location, parents are becoming more and more selective in the quality of schools they are choosing for their children. This fact may lead parents to choose a modern and good school even if it is far from their residence. On the other hand, and even if the school was close enough, the traffic congestion would make the on-feet journey of the kid to the school very risky. Driving children to school is a solution. However, it consumes a lot of time and effort each day in the morning and the afternoon. Hence, school buses are commonly used by all schools to take the student from and to his home. Nevertheless, waiting the bus each day to arrive is an exhausting and a time-wasting mission. In this paper we present a smart transportation system for school buses that helps in saving parents’ time, by avoiding waiting school buses in the morning and then in the afternoon to return kids back, especially with the increasing traffic jams at these hours. The proposed mobile and web application is designed to help parents, school and the bus to communicate automatically and easily via the application in order to detect kids’ arrival time. The bus application side will notify parents few minutes before its approaching to their homes. Furthermore, the system will allow parents to inform the school and hence the bus application side about the absence of their kid. The system has been efficiently and dynamically designed and implemented so it can be hosted and used by any school administration without the need to any major modifications. It has been tested on a summer school to prove its efficiency and marked an important positive feedback from the school and the parents’ sides.     

Scattering of Electromagnetic Waves by a Coated Nihility Cylinder

An analytical solution for the scattering of electromagnetic plane waves from an infinitely long nihility cylinder, coated with a double positive (DPS), double negative (DNG), epsilon negative (ENG), or mu negative (MNG) layer of uniform thickness is presented. The solution is determined by solving the scalar wave equation in the cylindrical coordinates, for different regions and applying the appropriate boundary conditions at the interfaces. Both TM and TE polarizations as incident plane have been considered in the analysis. Comparison of behaviors of a coated nihility cylinder with a coated PEC cylinder has been made. It is noted that two situations are more closer for DNG coating as compared to DPS coating.