A videogrammetric as-built data collection method for digital fabrication of sheet metal roof panels

A roofing contractor typically needs to acquire as-built dimensions of a roof structure several times over the course of its build because a structure is never built to the exact drawing dimensions. In the construction phase and in order to digitally fabricate sheet metal roof panels, the contractor has to measure end-to-end dimensions of boundaries of every roof plane with a certain level of accuracy (i.e., errors less than ±2 cm). This is necessary to be able to cut sheet metal coil such that different pieces perfectly fit together. Obtaining these measurements using the exiting roof surveying methods could be costly in terms of equipment, labor, and/or worker exposure to safety hazards. This paper presents a video-based surveying framework as an alternative method which is simple to use, automated, less expensive, and safe. When using this framework, the contractor collects video streams with a calibrated stereo camera set. The captured data is processed to automatically generate a 3D wire-diagram of the target roof. Measurements from the wire-diagram are saved in a digital file (XML format) which could be loaded into an on-site sheet metal folding and cutting machine. Experimental analyses demonstrate applicability of the proposed framework.     

Oxy‐fuel combustion technology: current status,applications, and trends

The increased level of emissions of carbon dioxide into the atmosphere due to burning of fossil fuels represents one of the main barriers toward the reduction of greenhouse gases and the control of global warming. In the last decades, the use of renewable and clean sources of energies such as solar and wind energies has been increased extensively. However, due to the tremendously increasing world energy demand, fossil fuels would continue in use for decades which necessitates the integration of carbon capture technologies (CCTs) in power plants. These technologies include oxycombustion, pre‐combustion, and post‐combustion carbon capture. Oxycombustion technology is one of the most promising carbon capture technologies as it can be applied with slight modifications to existing power plants or to new power plants. In this technology, fuel is burned using an oxidizer mixture of pure oxygen plus recycled exhaust gases (consists mainly of CO₂). The oxycombustion process results in highly CO₂‐concentrated exhaust gases, which facilitates the capture process of CO₂ after H₂O condensation. The captured CO₂ can be used for industrial applications or can be sequestrated. The current work reviews the current status of oxycombustion technology and its applications in existing conventional combustion systems (including gas turbines and boilers) and novel oxygen transport reactors (OTRs). The review starts with an introduction to the available CCTs with emphasis on their different applications and limitations of use, followed by a review on oxycombustion applications in different combustion systems utilizing gaseous, liquid, and coal fuels. The current status and technology readiness level of oxycombustion technology is discussed. The novel application of oxycombustion technology in OTRs is analyzed in some details. The analyses of OTRs include oxygen permeation technique, fabrication of oxygen transport membranes (OTMs), calculation of oxygen permeation flux, and coupling between oxygen separation and oxycombustion of fuel within the same unit called OTR. The oxycombustion process inside OTR is analyzed considering coal and gaseous fuels. The future trends of oxycombustion technology are itemized and discussed in details in the present study including: (i) ITMs for syngas production; (ii) combustion utilizing liquid fuels in OTRs; (iii) oxy‐combustion integrated power plants and (iv) third generation technologies for CO₂ capture. Techno‐economic analysis of oxycombustion integrated systems is also discussed trying to assess the future prospects of this technology. Copyright © 2017 John Wiley & Sons, Ltd.     

Synthesis and evaluation of some novel additives as antioxidants and corrosion inhibitors for petroleum fractions

Benzoxazinone 2 was prepared and reacted with formamide,acetamide,some primary aromatic amines and heterocyclic amines giving the corresponding quinazolone derivatives 3-15 respectively.The reaction of benzoxazinone 2 with hydrazine hydrate and phenyl hydrazine was also studied.Representative compounds of the synthesized products were evaluated as antioxidants and corrosion inhibitors for gasoline engine lubricating oil.The highest antioxidant activities were obtained with compounds 10-15.The optimum concentration recommended for these new additives was found to be 0.lg for 1L ofoil for compounds 13-15.In addition,some of the highly effective antioxidant additives,namely 10-15,were thermally analyzed by using thermogravimetric analysis （TGA） and differential thermal gravimetric analysis （DTGA） techniques and the results indicated that compounds are thermally stable and could be used under thermal conditions.Moreover,a comparison of the oxidation stability between the tested oil containing the prepared products and lubricating oil containing commercial additives was also studied.     

Parallel query execution over encrypted data in database-as-a-service (DaaS)

The Journal of Supercomputing - The main challenge in database-as-a-service is the security and privacy of data because service providers are not usually considered as trustworthy. So, the data...     

Improvement of physical and mechanical properties of electrospun poly(lactic acid) nanofibrous structures

Iranian Polymer Journal - The electrospinning of stereocomplexed poly(lactic acid) (Sc-PLA) twisted yarns was our approach to produce PLA-based nanofibrous structures with improved physical and...     

Applying multiple decomposition methods and optimization techniques for achieving optimal cost in mixed materials heat exchanger networks

The optimization of the total annual cost in heat exchanger networks has been one of the overarching goals when synthesizing these networks. Several methodologies and techniques have been developed to achieve optimal costs in mixed material heat exchanger networks. This paper demonstrates the application of two decomposition methodologies (total decomposition and partial decomposition) for typical cost rules. The objective function was defined as the optimization and minimization of the total annual cost in mixed materials heat exchanger network. Three optimization algorithms, hybrid genetic‐particle swarm optimization (GA‐PSO), shuffled frog leaping algorithm (SFLA) techniques, and ant colony optimization (ACO), were used to further optimize the total cost in mixed materials heat exchanger network. The results indicate that the total annual cost in partial decomposition method was smaller than that in full integration method and total decomposition method. The reduction of the total annual cost was about 27% for GA‐PSO algorithm, 24% for SFLA and 10% for ACO relative to the results reported in this work. In partial decomposition method, at least one mixed material of heat exchanger was used to reduce the hot and cold utility for decreasing the total annual cost. Partial decomposition method resulted in the highest reduction of the total annual cost compared with other methods. Percentage of difference of the total annual cost were 0.36%, 1.92%, and 5.05% for full integration, total decomposition, and partial decomposition methods, respectively, in comparison with the previous studies. Results have been compared with the results of other studies to demonstrate the accuracy of the applied algorithms.     

Frontiers in combustion techniques and burner designs for emissions control and CO2 capture: A review

The use of fossil fuel is expected to increase significantly by midcentury because of the large rise in the world energy demand despite the effective integration of renewable energies in the energy production sector. This increase, alongside with the development of stricter emission regulations, forced the manufacturers of combustion systems, especially gas turbines, to develop novel combustion techniques for the control of NO_x and CO₂ emissions, the latter being a greenhouse gas responsible for more than 60% to the global warming problem. The present review addresses different burner designs and combustion techniques for clean power production in gas turbines. Combustion and emission characteristics, flame instabilities, and solution techniques are presented, such as lean premixed air‐fuel (LPM) and premixed oxy‐fuel combustion techniques, and the combustor performance is compared for both cases. The fuel flexibility approach is also reviewed, as one of the combustion techniques for controlling emissions and reducing flame instabilities, focusing on the hydrogen‐enrichment and the integrated fuel‐flexible premixed oxy‐combustion approaches. State‐of‐the‐art burner designs for gas turbine combustion applications are reviewed in this study, including stagnation point reverse flow (SPRF) burner, dry low NO_x (DLN) and dry low‐emission (DLE) burners, EnVironmental burners (including EV, AEV, and SEV burners), perforated plate (PP) burner, and micromixer (MM) burner. Special emphasis is made on the MM combustor technology, as one of the most recent advances in gas turbines for stable premixed flame operation with wide turndown and effective control of NO_x emissions. Since the generation of pure oxygen is prerequisite to oxy‐combustion, oxygen‐separation membranes became of immense importance either for air separation for clean oxy‐combustion applications or for conversion/splitting of the effluent CO₂ into useful chemical and energy products. The different carbon‐capture technologies, along with the most recent carbon‐utilization approaches towards CO₂ emissions control, are also reviewed.     

Household biomass fuel use is associated with chronic childhood malnutrition: Result from a nationwide cross-sectional survey in Bangladesh

Despite significant investment, childhood malnutrition continues to be a significant public health problem especially in least developed countries. The aim of this study was to find association between household biomass fuel (BMF) use and childhood malnutrition in Bangladesh using data from Demographic and Health Survey 2011. We included a total 6891 children under 5 years of age in the analysis. The prevalence of wasting, underweight, and stunting from BMF using household was 16.1% (n = 997; 95%CI, 15.1–17.3), 39.0% (n = 2399; 95%CI, 37.1–40.9), and 43.3% (n = 2620; 95%CI, 41.6–45.1), respectively. Underweight and stunting were significantly higher among children from households using BMF compared with the children from CF using households (underweight, biomass vs clean fuel: 39.0% vs. 23.5%, p < 0.001; stunting, biomass vs clean fuel: 43.3 vs. 31.5%, p < 0.001). The use of BMF in the household was significantly associated with underweight (OR = 1.38; 95%CI: 1.10–1.73) and stunting (OR = 1.58; 95%CI: 1.18–1.98) among children <5 years of age after adjusting possible confounders in mixed effect logistic regression analysis. This study found a significant association between chronic childhood malnutrition and household BMF use which is indicating possible alternative risk factor for malnutrition. Further prospective research is required to explore the mechanism of how BMF use results in chronic malnutrition.