Performance analysis of shaft generator systems

A shaft generator system supplies electrical power required in a ship by using a part of the power produced by the main engine. Since the speed of the main engine can vary over a wide range, an externally commutated thyristor inverter, which has high reliability, is generally used to produce ac power with constant voltage and frequency. In this paper, a set of system equations, by which the total harmonic distortion of the output voltage, for example, can be estimated, is derived first. The effects of leading angle of the inverter and the reactance of ac reactor located in the output side of the inverter on the system performances and the operation limit of the system are then clarified. Moreover, a way of taking the system losses into account is proposed to obtain precise calculation results. Finally, the apparent power for the synchronous condenser to provide reactive power in the system is discussed. © 2000 Scripta Technica, Electr Eng Jpn, 131(3): 70–79, 2000     

Homolog of a-factor receptor gene in Saccharomyces exiguus

Homologs of Saccharomyces cerevisiae STE3, a -factor receptor gene were detected from S. exiguus NFRI 3539 by low stringency Southern hybridization. This strain might have at least two types of homolog. One of these homologs, designated as e-STE3 was cloned. Its nucleotide sequence revealed 60% identity to STE3. The putative protein coding region consisted of 453 amino acid residues. The amino acid sequence identity between STE3 and e-STE3 was 62%, and that of the N-terminal 303 amino acid residues considered to be the pheromone binding domain was 79%. The e-STE3 sequence submitted to the DDBJ/EMBL/GenBank data libraries is available under Accession Number AB003086. © 1998 John Wiley & Sons, Ltd.     

Fault-surge calculation using phase-domain ARMA line model

For fault-surge studies, the most important and also most difficult part of the simulation is inclusion of the frequency dependence of the transmission line, because the simulation requires high accuracy in a wide frequency range, from the power frequency to a few megahertz. The authors have developed a highly efficient method of modeling a transmission line considering its complete frequency dependence, which cannot be dealt with in the present line models in the Electro-Magnetic Transients Program (EMTP). According to the method, a transmission line is modeled directly in the phase domain in order to avoid model transformation and thus to eliminate the problems of representing its frequency dependence. The method also includes sophisticated acceleration of transient calculations by means of an autoregressive moving average (ARMA) model. This paper presents a method of steady-state initialization of the phase-domain ARMA line model for applying it to fault-surge calculations. The calculated results agree well with rigorous frequency-domain simulations and show improved accuracy compared with an existing frequency-dependent line model (J. Marti model) widely used as a standard model in the EMTP. © 1998 Scripta Technica, Inc. Electr Eng Jpn, 121(3): 27–35, 1997     

Decreased Podocyte Vesicle Transcytosis and Albuminuria in APC C-Terminal Deficiency Mice with Puromycin-Induced Nephrotic Syndrome

In minimal change nephrotic syndrome, podocyte vesicle transport is enhanced. Adenomatous polyposis coli (APC) anchors microtubules to cell membranes and plays an important role in vesicle transport. To clarify the role of APC in vesicle transport in podocytes, nephrotic syndrome was induced by puromycin amino nucleoside (PAN) injection in mice expressing APC1638T lacking the C-terminal of microtubule-binding site (APC1638T mouse); this was examined in renal tissue changes. The kidney size and glomerular area of APC1638T mice were reduced (p = 0.014); however, the number of podocytes was same between wild-type (WT) mice and APC1638T mice. The ultrastructure of podocyte foot process was normal by electron microscopy. When nephrotic syndrome was induced, the kidneys of WT+PAN mice became swollen with many hyaline casts, whereas these changes were inhibited in the kidneys of APC1638T+PAN mice. Electron microscopy showed foot process effacement in both groups; however, APC1638T+PAN mice had fewer vesicles in the basal area of podocytes than WT+PAN mice. Cytoplasmic dynein-1, a motor protein for vesicle transport, and α-tubulin were significantly reduced in APC1638T+PAN mice associated with suppressed urinary albumin excretion compared to WT+PAN mice. In conclusion, APC1638T mice showed reduced albuminuria associated with suppressed podocyte vesicle transport when minimal change nephrotic syndrome was induced.     

Effect of agglomeration of triacylglycerols on the stabilization of a model cream

This study has been carried out on solidification of a model cream using palm oil as a sole fat source. It was found that the addition of 1‐palmitoylglycerol to palm oil promoted the solidification of the model cream while the addition of 1‐oleoylglycerol had no such effect. Solid fat content of palm oil in the cream with 1‐palmitoylglycerol was found to be lower than those of palm oil and palm oil with 1‐oleoylglycerol after cooling from 60 to 5 °C. Crystallization behaviors of bulk palm oil and mixture of 1, 3‐dipalmitoyl‐ 2‐oleoyl‐glycerol (POP) and 1‐palmitoyl‐2, 3‐dioleoyl‐glycerol (POO) were then studied in the presence of monoacylglycerols. Formation of granular crystals was observed for palm oil and POP/POO mixture in the presence of 1‐palmitoylglycerol. HPLC of the granular crystals revealed that agglomeration of higher melting point triacylglycerols (TAGs) around 1‐palmitolyglycerol took place, which promoted the formation of granular crystals. It was suggested that the agglomeration of higher melting point TAGs around 1‐palmitoylglycerol which was preferentially adsorbed at the oil‐water interface of oil droplets in the model cream led to destabilization of oil‐in‐water emulsion and the solidification of the model cream. At the same time, it was suggested that the fatty acid moiety of emulsifiers played an important role in the agglomeration of TAGs and stabilization of o/w emulsions.     

Suppression of Bone Necrosis around Tooth Extraction Socket in a MRONJ-like Mouse Model by E-rhBMP-2 Containing Artificial Bone Graft Administration

Medication-related osteonecrosis of the jaw (MRONJ) is related to impaired bone healing conditions in the maxillomandibular bone region as a complication of bisphosphonate intake. Although there are several hypotheses for the onset of MRONJ symptoms, one of the possible causes is the inhibition of bone turnover and blood supply leading to bone necrosis. The optimal treatment strategy for MRONJ has not been established either. BMP-2, a member of the TGF-β superfamily, is well known for regulating bone remodeling and homeostasis prenatally and postnatally. Therefore, the objectives of this study were to evaluate whether cyclophosphamide/zoledronate (CY/ZA) induces necrosis of the bone surrounding the tooth extraction socket, and to examine the therapeutic potential of BMP-2 in combination with the hard osteoinductive biomaterial, β-tricalcium phosphate (β-TCP), in the prevention and treatment of alveolar bone loss around the tooth extraction socket in MRONJ-like mice models. First, CY/ZA was intraperitoneally administered for three weeks, and alveolar bone necrosis was evaluated before and after tooth extraction. Next, the effect of BMP-2/β-TCP was investigated in both MRONJ-like prevention and treatment models. In the prevention model, CY/ZA was continuously administered for four weeks after BMP-2/β-TCP transplantation. In the treatment model, CY/ZA administration was suspended after transplantation of BMP-2/β-TCP. The results showed that CY/ZA induced a significant decrease in the number of empty lacunae, a sign of bone necrosis, in the alveolar bone around the tooth extraction socket after tooth extraction. Histological analysis showed a significant decrease in the necrotic alveolar bone around tooth extraction sockets in the BMP-2/β-TCP transplantation group compared to the non-transplanted control group in both MRONJ-like prevention and treatment models. However, bone mineral density, determined by micro-CT analysis, was significantly higher in the BMP-2/β-TCP transplanted group than in the control group in the prevention model only. These results clarified that alveolar bone necrosis around tooth extraction sockets can be induced after surgical intervention under CY/ZA administration. In addition, transplantation of BMP-2/β-TCP reduced the necrotic alveolar bone around the tooth extraction socket. Therefore, a combination of BMP-2/β-TCP could be an alternative approach for both prevention and treatment of MRONJ-like symptoms.     

Effect of evaporation time on the pervaporation characteristics through homogeneous aromatic polyamide membranes. II. Pervaporation performances for ethanol/water mixture

Pervaporation of ethanol/water mixtures through symmetric dense aromatic polyamide membranes was investigated. The membrane structure was controlled by varying the solvent evaporation time before gelation. The membranes were water-selective and the selectivity increased with an increase in the solvent evaporation time. On the other hand, the water flux as well as the ethanol flux decreased with an increase in the evaporation time. These results were consistent with the morphology change of the membrane which takes place with solvent evaporation: the decrease in the channel size. The effects of the downstream pressure on the pervaporation performances were also studied for membranes with different solvent evaporation times. the ethanol concentration in the permeate side increased with an increase in the downstream pressure to certain point, showed a maximum there, then decreased thereafter. The water flux decreased with an increase in the downstream pressure for all membranes studied; the dependence was expressed by a parabolic curve in the lower pressure range. The ethanol flux also decreased with an increase in the downstream pressure for the membrane with shorter evaporation time, while this flux was slightly affected by the downstream pressure for the membrane with longer evaporation time. © 1996 John Wiley & Sons, Inc.     

Preparation of high-modulus poly(ethylene terephthalate) fibers by vibrating hot drawing

A novel drawing method, vibrating hot drawing, was successfully applied to poly(ethylene terephthalate) fiber, which has a normal molecular weight (IV = 0.7 dL/g) and was prepared by melt spinning. The process was divided into three steps, with differing conditions in drawing temperature, applied tension, vibrating frequency, and amplitude. The drawing temperature and vibration frequency were decided by considering the α_a dispersion of the polymer. In spite of a low draw ratio (7.7) and a low crystallinity (0.55), the birefringence and dynamic storage modulus at room temperature of the 3rd-step fiber reached 0.260 and 36 GPa, respectively. The modulus remains at a high level at elevated temperatures, for example, 29 GPa at 100°C and 17 GPa at 200°C. Further, it was found from temperature and intensity of the α_a dispersion peak that the movements of amorphous chains are strongly inhibited. © 1996 John Wiley & Sons, Inc.