Residual stress versus microstructural effects on the strength and toughness of phase-separated PbO–B2O3–Al2O3 glasses

A few authors have reasonably proposed that liquid–liquid phase-separated (LLPS) glasses could show improved fracture strength, S_f, and toughness, K_Ic, as the second phase could provide a barrier to crack propagation via deflection, bowing, trapping, or bridging. Due to the associated tensile or compressive residual stresses, the second phase could also act as a toughening or a weakening mechanism. In this work, we investigated five glasses of the PbO–B₂O₃–Al₂O₃ system spanning across the miscibility gap: Four of them undergo LLPS—three are binodal (two B₂O₃-rich and one PbO-rich) and one is spinodal—and one does not show LLPS (composition outside the miscibility gap). Their compositions were designed in such a way that the amorphous particles are under compressive residual stresses in some and under tensile residual stresses in others. The following mechanical properties were determined: the Vickers hardness, ball on three balls (B3B) strength, and toughness, K_Ic-SEVNB (single-edge V-notch beam [SEVNB]). The microstructures and compositions were analyzed using scanning electron microscopy with energy-dispersive X-ray spectrometry. The spinodal glass showed, by far, the best mechanical properties. Its K_Ic-SEVNB = 1.6 ± 0.1 MPa m^1/2, which embodies an increase of almost 50% over the B₂O₃-rich binodal composition, and 90% considering the PbO-rich binodal composition. Moreover, its fracture strength, S_f = 166 ± 7 MPa, is one of the highest ones ever reported for an LLPS glass. Fracture analyses evidenced that the spinodal composition exhibited the lowest net stress at the fracture point. Moreover, calculations indicate that the internal residual stress level is the lowest in the spinodal glass. The overall results indicate that the microstructural effect of the spinodal glass is the most significant factor for its superior mechanical properties. This work corroborates the idea that LLPS provides a feasible and stimulating solution to improve the mechanical properties of glasses.     

An Additional Insight into the Correlation between the Distribution Ratios and the Aqueous Acidity of the TODGA System

Abstract

Extraction of Eu(III) and Am(III) from HNO₃ into the organic solvents using N,N,N′,N′‐tetraoctyl‐diglycolamide (TODGA) was investigated in order to study the detailed extraction reaction. The chemical species: 1:2 for metal:TODGA complex is present in polar diluents. On the other hand, the metal complexes need three or more TODGA molecules to remain stable in non‐polar diluents. The HNO₃ concentration dependence on the distribution ratio suggests that HNO₃ participates in the metal extraction. Infrared spectra indicate that the carbonyl oxygen coordinates with Eu(III), and luminescence lifetimes suggest that there are no water molecules in the inner coordination sphere of the extracted Eu‐complex.     

Fabrication of Functionally Graded SiO2‐Mo Material by Centrifugation and Floc‐Casting of Highly Concentrated Slurry

To fabricate functionally graded materials, a highly concentrated slurry of SiO₂‐Mo system was prepared and centrifugal force was applied in an attempt to achieve a graded composition. Subsequently, we formed a homogeneous green body with compositional gradation by floc‐casting at 80°C, which was then fired at 1750°C for 10 min in Ar. The sintered body had compositional ratios of SiO₂ and Mo as well as electrical conductivities that changed gradually along the direction of centrifugal force. The results demonstrate that centrifugation and control of slurry characteristics such as flocculation are effective in fabricating functionally graded SiO₂‐Mo materials.     

Structure of silane layer formed on silica particle surfaces by treatment with silane coupling agents having various functional groups

The surface treatment of spherical silica particles with silane coupling agents having various organic functional groups was conducted and the effect of the alkoxy group number on the molecular flexibility of the silane chain with multilayer coverage was investigated using ¹H-pulse nuclear magnetic resonance spectroscopy. The silica particles were treated with 2-propanol solution and heated at 120?°C for 24?h after solvent evaporation to accelerate the polycondensation reaction of silanol groups. For multilayer coverage, flexible linear chain and rigid network structures were expected to form on the surface from the di- and trialkoxy structures, respectively. However, the rigid network structure was formed from both the di- and trialkoxy structures with glycidoxy, amino, and methacryloxy functional silanes. Ring opening of the epoxy group occurred, followed by reaction to form the network structure, even with the dialkoxy structure of the glycidoxy functionality. Ring opening of the epoxy group could be reduced by pH adjustment of the treatment solution and the linear chain structure was formed from the dialkoxy structure. In the case of amino and methacryloxy functional groups, hydrogen bonds were formed between the amino or methacryloxy groups and the silanol groups on the silica surface or silane molecules.     

Neuroprotective Effects of Liraglutide for Stroke Model of Rats

The number of diabetes mellitus (DM) patients is increasing, and stroke is deeply associated with DM. Recently, neuroprotective effects of glucagon-like peptide-1 (GLP-1) are reported. In this study, we explored whether liraglutide, a GLP-1 analogue exerts therapeutic effects on a rat stroke model. Wistar rats received occlusion of the middle cerebral artery for 90 min. At one hour after reperfusion, liraglutide or saline was administered intraperitoneally. Modified Bederson’s test was performed at 1 and 24 h and, subsequently, rats were euthanized for histological investigation. Peripheral blood was obtained for measurement of blood glucose level and evaluation of oxidative stress. Brain tissues were collected to evaluate the level of vascular endothelial growth factor (VEGF). The behavioral scores of liraglutide-treated rats were significantly better than those of control rats. Infarct volumes of liraglutide-treated rats at were reduced, compared with those of control rats. The level of derivatives of reactive oxygen metabolite was lower in liraglutide-treated rats. VEGF level of liraglutide-treated rats in the cortex, but not in the striatum significantly increased, compared to that of control rats. In conclusion, this is the first study to demonstrate neuroprotective effects of liraglutide on cerebral ischemia through anti-oxidative effects and VEGF upregulation.     

High thermal stable thermoplastic-thermosetting polyimide film by use of asymmetric dianhydride (a-BPDA)

In order to obtain thermoplastic (before curing) and thermosetting (after curing) polyimides with high T_g for adhesive film, we prepared novel polyimides having phenylethynyl group in the side chain (44% of concentration of curing group) from asymmetric 2,3,3′,4′-biphenyltetracarboxylic dianhydride (a-BPDA), 3,4′-oxydianiline (3,4′-ODA) or 1,3-bis(4-aminophenoxy)benzene (1,3,4-APB) or 1,3-bis(3-aminophenoxy)benzene (1,3,3-APB), and 2,4-diamino-1-(4-phenylethynylphenoxy)benzene (mPDAp). Among three kinds of polymer, uncured polyimide of a-BPDA/1,3,4-APB; mPDAp had rather high T_g (265 °C, DMA) and thermoplasticity (E′ drop>10³ at T_g). After curing reaction of phenylethynyl group, the T_g of the polyimide was increased dramatically (364 °C, DMA). The polyimide derived from 1,3,4-APB having less concentration of curing group (20%) was also prepared to improve further film flexibility and toughness.     

Smart polyion complex micelles for targeted intracellular delivery of PEGylated antisense oligonucleotides containing acid-labile linkages

A novel pH-sensitive and targetable antisense ODN delivery system based on multimolecular assembly into polyion complex (PIC) micelles of poly(L-lysine) (PLL) and a lactosylated poly(ethylene glycol)-antisense ODN conjugate (Lac-PEG-ODN) containing an acid-labile linkage (beta-propionate) between the PEG and ODN segments has been developed. The PIC micelles thus prepared had clustered lactose moieties on their peripheries and achieved a significant antisense effect against luciferase gene expression in HuH-7 cells (hepatoma cells), far more efficiently than that produced by the nonmicelle systems (ODN and Lac-PEG-ODN) alone, as well as by the lactose-free PIC micelle. In line with this pronounced antisense effect, the lactosylated PIC micelles showed better uptake than the lactose-free PIC micelles into HuH-7 cells; this suggested the involvement of an asialoglycoprotein (ASGP) receptor-mediated endocytosis process. Furthermore, a significant decrease in the antisense effect (27 % inhibition) was observed for a lactosylated PIC micelle without an acid-labile linkage (thiomaleimide linkage); this suggested the release of the active (free) antisense ODN molecules into the cellular interior in response to the pH decrease in the endosomal compartment is a key process in the antisense effect. Use of branched poly(ethylenimine) (B-PEI) instead of the PLL for PIC micellization led to a substantial decrease in the antisense effect, probably due to the buffer effect of the B-PEI in the endosome compartment, preventing the cleavage of the acid-labile linkage in the conjugate. The approach reported here is expected to be useful for the construction of smart intracellular delivery systems for antisense ODNs with therapeutic value.     

Osteoinduction by Functionally Graded Apatites of Bovine Origin Loaded with Bone Morphogenetic Protein-2

Bioresorbable and functionally graded apatites (fg-HAp) ceramics, which are characterized by gradations in crystallinity and the grain size of hydroxyapatite (HAp:Ca₁₀(PO₄)₆(OH)₂), were designed using bovine bone by the calcination and partial dissolution–precipitation method. The fg-HAp ceramics had macropores of 100–600 μm originated from spongy bone, and micropores of 10–160 nm. Fg-HAp ceramics loaded with recombinant human bone morphogenetic protein-2 (rhBMP-2/fg-HAp) were implanted into the subcutaneous tissue of rats. Eight weeks after the implantation, the surface and bulk degradations of the fg-HAp-containing body fluid occured, and small pieces of fg-HAp were incorporated into the induced bone and fatty marrow, suggesting that osteoinduction occurred in conjunction with bone remodeling. The rhBMP-2/fg-HAp ceramics developed could become a resorbable biomimetic material with fast bioresorption and osteoinduction characteristics.     

Studies on ionic salt of polyamic acid and related compounds

Amic acid compound namely bisphthalamic acid of 2, 2-dimethyl-4, 4-diaminobiphenyl (amic acid) and its ionic salt with 3-(dimethylamino)propyl methacrylate (amic acid salt) were synthesized and characterized by FT-IR, mass spectroscopy, NMR and DSC. Effect of temperature and water content on these compounds was studied by ¹H-NMR and potentiometric titration. In the absence of added water, both amic acid and its ionic salt had undergone imidization followed by hydrolysis, which was attributed to the water formed as a result of an initial imidization reaction. Polyamic acid (PAA) was synthesized by reacting 4, 4-oxydiphthalic anhydride and 2, 2-dimethyl 4, 4-diaminobiphenyl (m-tolidine) in N-methyl-2-pyrrolidone, which was then reacted with 3-(dimethylamino)propyl methacrylate to obtain PAS. Their storage stabilities were studied by monitoring their bulk viscosities and acid numbers as a function of time and temperature. PAS was found to be less stable than PAA. Similar observations were made for amic acid compounds. PAA and PAS showed two-step thermal degradation in air and nitrogen.