Critical temperature for production of MAG by esterification of different FA with glycerol using <Emphasis Type="Italic">Penicillium camembertii</Emphasis> lipase

Production of MAG by a lipase-catalyzed reaction is known to be effective at low temperature. This phenomenon can be explained by assuming that synthesized MAG are excluded from the reaction system because MAG, which have low m.p., are solidified at low temperatures. Consequently, MAG are efficiently accumulated and do not serve as the precursor of DAG. If this hypothesis is correct, the critical temperature for MAG production, defined as the highest temperature at which DAG synthesis is repressed, should depend on the m.p. of the MAG. Esterification of FFA with glycerol using Candida rugosa, Rhizopus oryzae, and Penicillium camembertii lipases produced MAG efficiently at low temperatures. However, Candida lipase showed very low esterification activity at high temperatures (>20°C), and Rhizopus lipase produced not only MAG but also DAG even at low temperatures. Meanwhile, P. camembertii lipase catalyzed synthesis of MAG only from FFA and glycerol at low temperatures, although the enzyme catalyzed synthesis of DAG from MAG in addition to synthesis of MAG at high temperatures. We thus studied the effect of temperature on esterification of C₁₀−C₁₈ FFA with glycerol using Penicillium lipase as a catalyst and determined the critical temperatures for production of MAG. The critical temperature for production of each MAG showed a linear correlation with m.p. of the MAG, which supported the hypothesis. In addition, because the m.p. of MAG are estimated from that of the constituent FA, the optimal temperature for production of MAG can be predicted from the m.p. of the FFA used as a substrate.     

The effect of sputter etching on the surface characteristics of dyed aramid fabrics

Three kinds of aramid fabrics, Technora (modified p-aramid), Conex (m-aramid) and Kevlar (p-aramid), were subjected to sputter etching and argon low-temperature plasma treatments after dyeing in black with disperse dyes. The depth of shade increased considerably on Technora and Kevlar with the sputter etching treatment, but not on Conex fabrics. Argon low-temperature plasma treatment had virtually no effect on the depth of shade on the aramid fabrics.     

Fractionation and enrichment of CLA isomers by selective esterification with Candida rugosa lipase

A commercial product of CLA contains almost equal amounts of cis-9,trans-11 (c9,t11)-CLA and trans-10,cis-12 (t10,c12)-CLA. We attempted to enrich the two isomers by a two-step selective esterification using Candida rugosa lipase that acted on c9,t11-CLA more strongly than on t10,c12-CLA. An FFA mixture containing CLA isomers was esterified with an equimolar amount of lauryl alcohol in a mixture of 20% water and the lipase. When the esterification of total FA reached 50%, two isomers were fractionated in a good yield: t10,c12-CLA was enriched in FFA, and c9,t11-CLA was recovered in lauryl esters. The FFA were esterified again to enrich t10,c12-CLA. At 27.3% esterification of total FA, the t10,c12-CLA content in FFA increased to 64.8 wt% with 89.3% recovery: The ratio of the content of t10,c12-CLA to that of two isomers was 95.9%. Lauryl esters obtained by the single esterification were employed for enrichment of c9,t11-CLA. After the esters were hydrolyzed, the resulting FFA were esterified again with lauryl alcohol. At 62.0% esterification of total FA, the c9,t11-CLA content in lauryl esters increased to 73.3 wt% with 79.4% recovery: The ratio of the content of c9,t11-CLA to that of two isomers was 95.6%. In a 600-g-scale purification, molecular distillation was effective in separating the reaction mixture into lauryl alcohol, FFA, and lauryl ester fractions.     

Graft polymerization of some vinyl monomers onto acrylic rubber. II. Mechanical properties of graft polymers

Some mechanical properties of styrene and acrylonitrile copolymers grafted onto acrylic rubber are investigated. The impact strength of graft polymers depended upon the nature and the concentration of the catalyst, the composition and the intrinsic viscosity of the rubber, and the acrylonitrile content in the rigid matrix. The most desirable result was obtained when benzoyl peroxide as the catalyst, n-butyl acrylate–acrylonitrile copolymer of 7–10% acrylonitrile content, and about 0–5% acrylonitrile in the rigid matrix were used. Dynamic mechanical tests show the increase in efficiency of rubber modification by the grafted chains. The better weathering resistance of these graft polymers, as compared with commercial ABS plastics, was confirmed.     

Synthesis of Compositionally Homogeneous Sr(CuxZn1−x)1/2W1/2O3

A complex perovskite of Sr(Cu _x Zn_{1- x} )_1/2 W_1/2O₃ (SCZW) is synthesized by a new combination of wet and dry processess. Mixed oxides containing Cu²⁺ and Zn²⁺ (CZ) are prepared by the wet process (coprecipitate method). SCZW is obtained by the dry process (mixed-oxide method) from a mixture of CZ, SrCO₃, and WO₃. SCZW has practically no compositional, unlike solid solutions prepared by the conventional dry method. The wet–dry process method is useful because the wet process is applied to only B-site cations having the same valence.     

Development of a high‐resolution RGBW flexible display using a white organic light‐emitting diode with microcavity structure and that of a side‐roll touch panel

In this study, white organic electroluminescent devices with microcavity structures were developed. A flexible high‐resolution active‐matrix organic light‐emitting diode display with low power consumption using red, green, blue, and white sub‐pixels formed by a color‐filter method was fabricated. In addition, a side‐roll touch display was developed in combination with a capacitive flexible touch screen.     

Continuous-velocity lattice gas cellular automata for miscible binary fluid and its application to simulation of interface instability

Continuous-velocity lattice gas cellular automata (CVLGA) is extended to miscible binary fluid systems. A new parameter is introduced in order to control the diffusivity of the fluids. The correlation between the diffusivity and the new parameter proves that there exists the maximum value of the diffusivity. Quantitative verifications of the model are carried out with numerical simulations of the diffusion phenomena across a falling fluid film. The model is then applied to the simulations of Rayleigh-Taylor instability during the gravitational mixing phenomena. The qualitative tendency of the growth of the interface instability is the same as that obtained in conventional numerical methods.     

High thermal stable thermoplastic-thermosetting polyimide film by use of asymmetric dianhydride (a-BPDA)

In order to obtain thermoplastic (before curing) and thermosetting (after curing) polyimides with high T_g for adhesive film, we prepared novel polyimides having phenylethynyl group in the side chain (44% of concentration of curing group) from asymmetric 2,3,3′,4′-biphenyltetracarboxylic dianhydride (a-BPDA), 3,4′-oxydianiline (3,4′-ODA) or 1,3-bis(4-aminophenoxy)benzene (1,3,4-APB) or 1,3-bis(3-aminophenoxy)benzene (1,3,3-APB), and 2,4-diamino-1-(4-phenylethynylphenoxy)benzene (mPDAp). Among three kinds of polymer, uncured polyimide of a-BPDA/1,3,4-APB; mPDAp had rather high T_g (265 °C, DMA) and thermoplasticity (E′ drop>10³ at T_g). After curing reaction of phenylethynyl group, the T_g of the polyimide was increased dramatically (364 °C, DMA). The polyimide derived from 1,3,4-APB having less concentration of curing group (20%) was also prepared to improve further film flexibility and toughness.     

Crosslinked acrylic pressure sensitive adhesives. 3. Effect of adherend on film formation

The reaction of isocyanate in pressure sensitive adhesive (PSA) films adhered on to various adherends having different surface tensions was monitored by depth profiling using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy.In the latter stages of crosslinking reaction, unreacted isocyanate and its derivatives exist more in the bulk of the PSA than in the interfaces between PSA and adherends which are Teflon sheet and PE film having relatively lower surface tensions. In the case of using stainless steel having relatively higher surface tension as adherend, opposite segregation was observed compared to Teflon and PE.From X-ray photoelectron spectroscopy (XPS), it was revealed that N atoms exist more in surface than in bulk when stainless steel is used as adherend. We conclude that polyisocyanates migrate in the PSA film in order to minimize the magnitude of interfacial free energy between the PSA and the adherend, which leads to the change of surface tension of PSA film.     

Quantitative determination of corrosion products and adsorbed water on copper in humid air containing SO2 by IR-RAS measurements

The time dependency of the amounts of corrosion products and co-existing adsorbed water on copper in humid air containing SO₂ was estimated from a series of in situ time-resolved IR-RAS spectra on the basis of the relations between the band intensities and the mass changes of the corrosion products, which were determined by simultaneous measurement of IR-RAS and QCM. The amounts of both corrosion products increased slowly at the initial stage and later increased rapidly. Although the relative humidity was kept constant, the amount of adsorbed water increased nearly the same behavior as that of corrosion products in the stage of relatively small amounts of corrosion products and later increased rapidly when the amounts of corrosion products increased. In humid air without SO₂, sulfite gradually decomposed and some of it changed into sulfate.