Pure delay effects on speech quality in telecommunications

The effect of transmission delay on speech quality in telecommunications is described, with human factors such as conversational mode and the talker's knowledge of the cause of delay taken into account. Objective quality estimation methods for delay effects are proposed, and these methods are applied in an actual communications network. In connection with delay perception in a telephone conversation, the assumption was verified that a talker expects a particular response time from a partner, and that delay that is outside this expectation time window is noticed. Taking this information into account, a subjective conversational experiment is controlled by six kinds of tasks by varying the temporal characteristics. Thus, a subjective assessment of delay effects is obtained by laboratory tests in relation to the detectability threshold, opinion rating, and conversational efficiency. Objective quality measures for each test were defined as a linear combination of temporal parameters that correspond closely to subjective qualities     

Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.     

Atomistic origin of high-quality “novel SiON gate dielectrics”

We have investigated the effect of the oxygen incorporation into SiN films by the first principles calculations. The calculated results show that the oxygen incorporation tends to generate defect states in SiN band gap by forming dangling bonds and floating bonds of Si. Based on the calculated results, it is also indicated that the high quality SiON film can be fabricated by suppressing the incorporation of O atoms into the SiN film, reproducing the reported experiments.     

Selective Determination of Dopamine on a Boron‐Doped Diamond Electrode Modified with Gold Nanoparticle/Polyelectrolyte‐coated Polystyrene Colloids

Negatively charged gold nanoparticles (AuNPs) and a polyelectrolyte (PE) have been assembled alternately on a polystyrene (PS) colloid by a layer‐by‐layer (LBL) self‐assembly technique to form three‐dimensional (Au/PAH)₄/(PSS/PAH)₄ multilayer‐coated PS spheres (Au/PE/PS multilayer spheres). The Au/PE/PS multilayer spheres have been used to modify a boron‐doped diamond (BDD) electrode. Cyclic voltammetry is utilized to investigate the properties of the modified electrode in a 1.0 M KCl solution that contains 5.0 × 10^?3 M K₃Fe(CN)₆, and the result shows a dramatically decreased redox activity compared with the bare BDD electrode. The electrochemical behaviors of dopamine (DA) and ascorbic acid (AA) on the bare and modified BDD electrode are studied. The cyclic voltammetric studies indicate that the negatively charged, three‐dimensional Au/PE/PS multilayer sphere‐modified electrodes show high electrocatalytic activity and promote the oxidation of DA, whereas they inhibit the electrochemical reaction of AA, and can effectively be used to determine DA in the presence of AA with good selectivity. The detection limit of DA is 0.8 × 10^?6 M in a linear range from 5 × 10^?6 to 100 × 10^?6 M in the presence of 1 × 10^?3 M AA.     

Effects of Heavy Element Substitution on Electronic Structure and Lattice Thermal Conductivity of Fe2VAl Thermoelectric Material

By using first-principles cluster calculations, we identified that Ta or W substitution for V is useful for decreasing the lattice thermal conductivity of the Fe₂VAl Heusler alloy without greatly affecting the electron transport properties. It was clearly confirmed that the Fe₂(V_1?x Ta _x )Al_0.95Si_0.05 (x?=?0, 0.025, 0.05), Fe₂(V_0.9?x Ta _x Ti_0.1)Al (x?=?0, 0.10, 0.20), and Fe₂(V_0.9?2x W _x Ti_0.1+x )Al (x?=?0, 0.05, 0.10) alloys indeed possessed large Seebeck coefficient regardless of the amounts of substituted elements, while their lattice thermal conductivity was effectively reduced. As a result of partial substitution of Ta for V, we succeeded in increasing the magnitude of the dimensionless figure of merit of the Heusler phase up to 0.2, which is five times as large as the Ta-free compound.     

A 2-V CMOS cellular transceiver front-end

This work presents the design and implementation of a 2-V cellular transceiver front-end in a standard 0.25-μm CMOS technology. The prototype integrates a low-IF receiver (low noise amplifier, I/Q mixers, and VGAs) and a direct-upconversion transmitter (I/Q mixers and pre-amplifier) on a single die together with a complete phase-locked loop, including a 64/79 prescaler, a fully integrated loop filter, and a quadrature voltage controlled oscillator with on-chip inductors. Design trade-offs have been made over the boundaries of the different building blocks to optimize the overall system performance. All building blocks feature circuit topologies that enable comfortable operation at low voltage. As a result, the IC operates from a power supply of only 2 V, while consuming 191 mW in receiver (RX) mode and 160 mW in transmitter (TX) mode. To build a complete transceiver system for 1,8-GHz cellular communication, only an antenna, an antenna filter, a power amplifier, and a digital baseband chip must be added to the analog front-end. This work shows the potential of achieving the analog performance required for the class I/II DCS-1800 cellular system in a standard 0.25-μm CMOS technology, without tuning or trimming     

Fir laser emissions from population inversion transition by TEA-CO2 laser pumping

In this paper, the numerical analysis is given which is applicable for a TEA-CO₂ laser pumping in search of effective pumping method. The analysis also can estimate the optimum pressure for a given molecule and a given pulse laser. Also we report in this work many FIR laser emissions from population inversion transition which have never observed before using a TEA-CO₂ laser.     

Performance of handoff algorithm based on distance and RSSI measurements

The performance of a proposed handoff algorithm based on both the distance of a mobile station to neighboring base stations and the relative signal strength measurements is evaluated. The algorithm performs handoff when the measured distance from the serving base station exceeds that from the candidate base station by a given threshold and if the measured signal strength of the adjacent base station exceeds that of the serving base station by a given hysteresis level. The average handoff delay and average number of handoffs are used as criteria for performance. Numerical results are presented to demonstrate the feasibility of the distance-based handoff algorithm, including results for an additional criterion based on relative signal strength. The proposed algorithm is compared with an algorithm based on absolute and relative signal strength measurements and with a solely distance-based algorithm. It is found that the proposed handoff algorithm performs well in a log-normal fading environment when the distance estimate error is modeled by wide-sense stationary additive white Gaussian noise.     

Fracture behavior of a corroded structural component under bending load

In order to clarify the significance of corrosion damage for risk assessment, bend tests were carried out on a roughened corroded annular plate prepared from an oil storage tank. It was found that a marked decrease of load carrying capacity occurred in the high deflection region depending upon the degree of corrosion damage. The reason for extensive loss of load carrying capacity was successfully explained from successive observation of crack growth behavior on the corroded surface of the annular plate. Photographic evidence showed that multiple cracks, initiated around individual pits, grew rapidly not only by crack growth, but also by coalescence with other neighboring cracks under the influence of plastic constraint derived from the welded joint. The linking up of multiple cracks leading to a catastrophic failure was considered to be a characteristic event of the roughened corroded component, and was expected to occur depending upon the degree of corrosion damage under a complex stress state.