Characterization of germanium implanted Si1−xGex layer

Characterization of a Si_1−xGe_x layer formed by high-dose germanium implantation and subsequent solid phase epitaxy is reported. Properties of this layer are obtained from electrical measurements on diodes and transistors fabricated in this layer. Results are compared with those of the silicon control devices. It was observed that the germanium implantation created considerable defects that are difficult to eliminate with annealing. These defects result in boron deactivation in the p-type regions of the devices, giving rise to larger resistance. Optimization of the device structure and fabrication process is discussed.     

Advanced Wireless Access System

The key words for the future telecommunications are personalization, multi-media services and high accessibility to the network. These trends naturally lead to radio media application to access links. In this sense, this paper proposes an advanced wireless access system with a capacity supporting broadband video and data services.Concept of the system can be defined as a new radiocommunication category with advantages of both fixed and mobile systems.The system is designed to transport ATM-based signals using SHF (or EHF) bands to wireless terminals, interconnected with optical fibers at the network side. The basic system configuration is presented as well as examples of system parameters.For radio aspects the maximum service coverages of the radio base stations are calculated based on availability consideration. Preferred frequency bands for actual operation are also discussed.     

Direct Measurement of Positronium HyperFine Structure: ～ A New Horizon of Precision Spectroscopy Using Gyrotrons ～

Positronium is an ideal system for research on QED, especially in a bound state. A discrepancy (3.9σ) is found recently between measured HFS values and the QED prediction (including up-to O(α ³ log α ^− 1), where α is the fine-structure constant.). It might be due to a contribution of unknown new physics or common systematic problems in all the previous measurements. A new method to measure HFS directly is performed using a high power gyrotron. The transition from ortho-positronium to para-positronium has been observed with 5 σ CL, which is the first observation of M1 transition in (sub)Terahertz region. New technologies of high power gyrotrons are developed for precision spectroscopy.     

Magnetization distribution of magnetic vortex of amorphous FeSiB investigated by electron holography and computer simulation

The three-dimensional spin structure of the magnetic vortex of FeSiB, an amorphous soft magnetic material, was investigated by holography observation and computer simulation. Magnetization distribution in the neighborhood of the vortex center was estimated from the phase distribution obtained by holography observation. To confirm this magnetization distribution, sample-tilting experiments were performed: when the sample was tilted with respect to the electron beam direction, the phase-image center was found to shift along the tilting axis. Finite-element computer simulation was carried out to estimate the amount of shifts of the phase-image center in the sample tilting from the experimental magnetization distributions in the no sample-tilting conditions. We found that the simulated shifts of the phase-image center were in good agreement with those in the sample-tilting experiment, thus confirming the magnetization distribution near the vortex center obtained by holography observation.     

The Direct Spectroscopy of Positronium Hyperfine Structure Using a Sub-THz Gyrotron

Positronium is an ideal system for research on Quantum Electrodynamics (QED), especially in a bound state. A discrepancy of 3.9 standard deviations has been found between the measured hyperfine structure (Ps-HFS) and the QED predictions. This may be due to the contribution of unknown new physics or common systematic effects in previous measurements, in all of which the Zeeman effect was used. We propose a new method to directly measure the Ps-HFS using a high power gyrotron. We compare two resonators which have been developed to supply sufficient power to drive the direct transition, a Fabry-Pérot resonator and a ring resonator with a diffraction grating. We plan to perform first direct measurement of Ps-HFS within the next six months.     

Development of Millimeter Wave Fabry-Pérot Resonator for Simultaneous Electron-Spin and Nuclear Magnetic Resonance Measurement

We report a Fabry-Pérot resonator with spherical and flat mirrors to allow simultaneous electron-spin resonance (ESR) and nuclear magnetic resonance (NMR) measurements that could be used for double magnetic resonance (DoMR). In order to perform simultaneous ESR and NMR measurements, the flat mirror must reflect millimeter wavelength electromagnetic waves and the resonator must have a high Q value (Q?>?3000) for ESR frequencies, while the mirror must simultaneously let NMR frequencies pass through. This requirement can be achieved by exploiting the difference of skin depth for the two frequencies, since skin depth is inversely proportional to the square root of the frequency. In consideration of the skin depth, the optimum conditions for conducting ESR and NMR using a gold thin film are explored by examining the relation between the Q value and the film thickness. A flat mirror with a gold thin film was fabricated by sputtering gold on an epoxy plate. We also installed a Helmholtz radio frequency coil for NMR and tested the system both at room and low temperatures with an optimally thick gold film. As a result, signals were obtained at 0.18 K for ESR and at 1.3 K for NMR. A flat-mirrored resonator with a thin gold film surface is an effective way to locate NMR coils closer to the sample being examined with DoMR.     

Electron Holography Studies on Narrow Magnetic Domain Walls Observed in a Heusler Alloy Ni50Mn25Al12.5Ga12.5

Peculiar magnetic domain walls produced in Heusler alloys, which have attracted renewed interest due to their potential application to actuators and spintronic devices, are studied here using electron holography. The observations reveal unexpectedly narrow magnetic domain walls, the width of which showed perfect agreement with that of the antiphase boundaries (APB, e.g., only 3 nm). While the results can be explained by the significant depression of ferromagnetism due to the local chemical disorder, the electron phase shift indicates that ferromagnetic correlation still remains in the APB region.     

Metal Single-Atom Cocatalyst on Carbon Nitride for the Photocatalytic Hydrogen Evolution Reaction: Effects of Metal Species

Single-atom (SA) catalysts exhibit high activity in various reactions because there are no inactive internal atoms. Accordingly, SA cocatalysts are also an active research fields regarding photocatalytic hydrogen (H₂) evolution which can be generated by abundant water and sunlight. Herein, it is investigated whether 10 transition metal elements can work as an SA on graphitic carbon nitride (g-C₃N₄; i.e., gCN), a promising visible-light-driven photocatalyst. A method is established to prepare SA-loaded gCN at high loadings (weight of ≈3 wt.% for Cu, Ni, Pd, Pt, Rh, and Ru) by modulating the photoreduction power. Regarding Au and Ag, SAs are formed with difficulty without aggregation because of the low binding energy between gCN and the SA. An evaluation of the photocatalytic H₂-evolution activity of the prepared metal SA-loaded gCN reveals that Pd, Pt, and Rh SA-loaded gCN exhibits relatively high H₂-evolution efficiency per SA. Transient absorption spectroscopy and electrochemical measurements reveal the following: i) Pd SA-loaded gCN exhibits a particularly suitable electronic structure for proton adsorption and ii) therefore they exhibit the highest H₂-evolution efficiency per SA than other metal SA-loaded gCN. Finally, the 8.6 times higher H₂-evolution rate per active site of Pd SA is achieved than that of Pd-nanoparticles cocatalyst.     

Development of a specimen heating holder with an evaporator and gas injector and its application for catalyst

A specimen heating holder equipped with a gas injector and an evaporator has been developed for use with conventional transmission electron microscopes (TEMs). The developed specimen holder allows both synthesis of metal oxide support and deposition of catalyst nano-particles in situ. Since the holder is designed to be used in small gapped high-resolution objective lens pole-piece, all the procedure from the synthesis of support material to the deposition of catalyst as well as the behavior of the catalyst nano-particles on the support can be observed at near atomic resolution. The developed specimen holder was applied to the study of AuPd catalyst. First, air was injected onto heated aluminum particles via a gas injector to synthesize Al(2)O(3) support. Then, nano-particles of AuPd were deposited on the Al(2)O(3) support. After the deposition, the synthesized Al(2)O(3) support was heated and air was injected again to observe behaviors of the deposited AuPd nano-particles at elevated temperatures in the aerial environment. Behaviors of the AuPd nano-particles such as coalescence, segmentation and diffusion to the Al(2)O(3) support were dynamically observed at atomic level high resolution.