Evaluation of Turkish sulphur olive oil as an alternative diesel fuel

Esterification of Turkish sulphur olive oil with different types of straight- and branched-chain monohydric alcohols has been investigated. Reaction conditions such as temperature and time have been evaluated, and monoester yield has been determined. As the alcohol component, direct application of an industrial byproduct such as crude fuel oil has been investigated. Finally some preliminary laboratory tests concerning the suitability of the fuel oil monoester as a diesel fuel substitute have been performed.     

Data erasure in Fabry–Perot Diode Lasers: effects of facet reflectivity

ABSTRACT

In this study, the effects of facet reflectivity on the data erasure ability of injection-locked Fabry Perot Laser Diode (FPLD), based on a remodulation method in wavelength division multiplexed passive optical network (WDM PON), were investigated. For this purpose, the feasible front facet reflectivity of FPLD was determined as between 0.2% and 7%, depending on the specified injected power interval. Firstly, the system carried out analysis without applying data at the user end to comprehensively demonstrate how much downstream data was completely erased in FPLD. Then, 2.5 Gb/s of non-return-to-zero (NRZ) data was applied and the results compared with the erased downstream signal without data. The results show that upstream transmission improved with an increase in facet reflectivity between 0.2% and 7%.     

Reconfigurable and Latchable Shape‐Morphing Dielectric Elastomers Based on Local Stiffness Modulation

Programmable soft materials exhibiting dynamically reconfigurable, reversible, fast, and latchable shape transformation are key for applications ranging from wearable tactile actuators to deployable soft robots. Multimorph soft actuator sheets with high load‐bearing capacity are reported, capable of bending on multiple axis, made by combining a single dielectric elastomer actuator (DEA) with two layers of shape memory polymers (SMPs) fibers and an array of stretchable heaters. The rigidity of the SMP fibers can be reduced by two orders of magnitude by Joule heating, thus allowing the orientation and location of soft and hard regions to be dynamically defined by addressing the heaters. When the DEA is then actuated, it bends preferentially along the soft axis, enabling the device to morph into multiple distinct configurations. Cooling down the SMPs locks these shape changes into place. A tip deflection angle of over 300° at 5 kV is achieved with a blocking force of over 27 mN. Devices using two antagonistic DEAs are also reported that attain more complex shapes. Multimorphing is demonstrated by gripping objects with different shapes. An analytical model is developed to determine the design parameters that offers the best trade‐off between large actuation and high holding forces.     

Covalent Immobilization of a α-Amylase onto Poly(methyl methacrylate-2-hydroxyethyl methacrylate) Microspheres and the Effect of Ca2+ Ions on the Enzyme Activity

α-Amylase was covalently immobilized onto poly(methyl methacrylate-2-hydroxyethyl methacrylate) microspheres, which were activated by using either epichlorohydrin (ECH) or cyanuric chloride (C₃N₃Cl₃). The properties of the immobilized enzyme were investigated and compared with those of the free enzyme. For the assays carried out at 25 °C and pH 6.9, the relative activities were found to be 73.0% and 90.8% for epichlorohydrin and cyanuric chloride bound enzymes, respectively. Upon immobilization, the maximum activities were obtained at lower pH values and higher temperatures as compared with the free enzyme. Kinetic parameters were calculated as 2.51 g/L, 28.54 g/L and 15.50 g/L for K_m and 1.67 × 10⁻³ gL⁻¹ min⁻¹ 2.89 × 10⁻⁴ gL⁻¹ min⁻¹ and 1.89 × 10⁻³ gL⁻¹ min⁻¹ for V_max for free, epichlorohydrin and cyanuric chloride bound enzymes, respectively. Enzyme activities were found to be ca. 32.7% for ECH and 41.1% for C₃N₃Cl₃ activated matrices after storage for one month. On the other hand the free enzyme lost its activity completely within 20 days. Immobilization, storage stability and repeated use capability experiments carried out in the presence of Ca²⁺ ions demonstrated higher stability in the presence of these ions. The enzymes immobilized in the presence of Ca²⁺ ions retained 90.6% and 90.8% of the original activities even after 30 days in the case of ECH and C₃N₃Cl₃ activations, respectively. In repeated batch experiments, i.e., 20 uses of the enzyme in 3 days; in the absence of Ca²⁺ ions retentions of 79.2% and 77.1% of the original enzyme activities were observed for ECH and C₃N₃Cl₃ immobilized enzymes, respectively, whereas, in the case of addition of Ca²⁺ ions to the assay medium, these values were enhanced to 95.3% and 92.2%.     

Dispersion-strengthening effect of Cu-based Mn, Al, and Zn rich alloys

In this systematic study, dispersion-strengthening effect of the Cu–25.91Mn (wt.%), Cu–26.62Mn–8.99Al (wt.%), Cu–22.17Mn–12.32Zn (wt.%) ingot alloys have been investigated. Samples were homogenized at a high fixed temperature in different periods and cooled with different cooling rates. After processes, microanalysis of the samples were interpreted by using scanning electron microscope (SEM) and weight percentages of the elements of the occurrence phases in the samples obtained by using electron dispersion spectroscopy (EDS) technique. Additionally, some characteristic properties of the heat treated samples with different conditions of Cu–Mn, Cu–Mn–Al, Cu–Mn–Zn ingot alloys were also discussed.     

Mechanical Properties of TiTaHfNbZr High-Entropy Alloy Coatings Deposited on NiTi Shape Memory Alloy Substrates

TiTaHfNbZr high-entropy alloy (HEA) thin films with thicknesses of about 750 and 1500 nm were deposited on NiTi substrates by RF magnetron sputtering using TiTaHfNbZr equimolar targets. The thorough experimental analysis on microstructure and mechanical properties of deposited films revealed that the TiTaHfNbZr films exhibited amorphous and cauliflower-like structure, where grain size and surface roughness increased concomitant with film thickness. More importantly, the current findings demonstrate that the TiTaHfNbZr HEA films with mechanical properties of the same order as those of the NiTi substrate constitute promising biomedical coatings effective in preventing Ni release.     

Preparation and textile application of poly(methyl methacrylate-co-methacrylic acid)/n-octadecane and n-eicosane microcapsules

In this study, a series of microencapsulated phase change materials with poly(methyl methacrylate-co-methacrylic acid) P(MMA-co-MAA) shell and n-octadecane or n-eicosane core were synthesized by emulsion polymerization method. The aim was to produce microencapsulated n-alkanes having functional groups on their outer surface, so that functional groups would help increasing physical interactions between microcapsules and fiber surface. Therefore, methyl methacrylate (MMA), ethylene glycoldimethacrylate (EGDM), and methacrylic acid (MAA) were copolymerized in oil phase of n-alkane. FT-IR results proved the successful synthesis of P(MMA-co-MAA) shell of microencapsulated n-alkanes. The DSC results indicated that the microencapsulated n-alkanes have considerable latent heat storage capacity in a range of 58–145 J/g. The average melting and freezing temperatures of the microencapsulated n-alkanes were measured as 27 and 26 °C for n-octadecane and 36 and 35 °C for n-eicosane, respectively. The microcapsules were of spherical and compact shape with particle sizes between 15 and 32 μm. The microcapsules on the cotton fabric applied by pad-dry-cure method were found highly durable and they showed sufficient stability upon several washings and rub fastness. Thermo-regulating properties of the fabrics were declared as a result of thermal history measurements.     

Effect of heat treatment on physical properties of CdO films deposited by sol–gel method

CdO film has been deposited by sol–gel spin coating method on the glass substrate and then the film has been annealed at 400, 500, 600 °C for 1 h. Effect of annealing temperature on the structural and optical properties of the film has been investigated. The crystal structure and orientation of the as-grown and annealed CdO films have been investigated by X-ray diffraction method. Annealed CdO films are polycrystalline with (111) preferential orientation. The information on strain and grain size is obtained from the full width-at-half-maximum (FWHM) of the diffraction peaks. Texture coefficient and lattice constant have been calculated. The surface morphology of the films has been analyzed. The optical band gap value decreased with increasing the annealing temperatures.     

Solvent-free glycerolysis catalyzed by acetone powder of Nigella sativa seed lipase

The solvent-free glycerolysis of used sunflower oil catalyzed by acetone powder of Nigella sativa seeds was investigated. The highest partial acylglycerols yield was obtained at 60°C. The glycerolysis reactions, conducted at molar ratios of 1:1, 2:1, and 3:1 of oil to glycerol keeping the acetone powder content at 30% based on oil weight and the temperature at 60°C, approached equilibrium after 2 h. The highest partial acylglycerol content of the products was 66% (1:1 molar ratio) and 60% (2:1 molar ratio).