Effective strain rate sensitivity of two phase materials

Analytical expressions are derived for the effective strain rate sensitivity exponent of a two phase material when the behavior of both phases and of the composite itself can be described by power law relations between the stress and strain rates. The material is assumed to be plastically isotropic and obey to von-Mises type creep behavior. Two types of boundary conditions are considered: strain or stress-controlled. The obtained formulas are applied to a geological composite material (mixture of camphor and octachloropropane) with the help of different simple models of two phase composites.     

Exact and approximate formulas for cross flow heat exchangers with unmixed fluids

This article addresses the calculation of the effectiveness of a single-pass cross-flow heat exchanger where the two fluids are not mixed. The author proposes an exact formula which is more convenient than using infinite series expansions as has been proposed until now.     

High‐resolution solid‐state NMR investigation of the filler–rubber interaction: 2. High‐speed [1H] magic‐angle spinning NMR spectroscopy in carbon‐black‐filled polybutadiene

This work investigates the behaviour of elastomeric chains (polybutadienes of identical molecular weight but different microstructures) in the close vicinity of carbon black surfaces in order to attain a better understanding of the structure and properties of interphases. Elastomer–filler interactions are assessed through the study of the thermal properties and NMR relaxation characteristics of the corresponding materials. Three series of samples were compared: pure polymers, raw polymer–filler blends (filler loading ratio: 50 phr) and solvent‐extracted blends (so as to get rid of any polymer which is not under the influence of the solid surface). While differential scanning calorimetry points to the existence of an elastomer fraction which is not detected as undergoing the glass transition, ie is strongly immobilized, [¹H] high‐resolution high‐speed magic‐angle spinning solid‐state NMR provides information on the effect exerted by polymer–filler interactions on the mobility of the various constitutive species of the macromolecular backbone. A systematic study of the evolution of the spectral lines yielded by the samples indicates that 1,2‐polybutadiene moieties have a particular affinity towards the carbon black surface which suggests the occurrence of specific interactions at the elastomer–filler interface. © 2001 Society of Chemical Industry     

Forecast of mycotoxins levels in soft wheat, durum wheat and maize before harvesting with Qualim��tre?

Some mycotoxins are produced by several Fusarium species during cultivation and are found in wheat and maize grain. Since 2000, Syngenta has organised a large field survey. Agronomic and climatic data and grain samples have been collected for mycotoxin analysis in France and Belgium. The importance of the agroclimatic factors and their interactions on the mycotoxin levels in grain has been estimated. The climate around flowering stage is the major factor for deoxynivalenol (DON) in wheat. The main agronomic criteria are residue management and the variety sensitivity to this mycotoxin. For DON, zearalenone and fumonisins in maize, the climate from flowering stage until harvest is the major factor. Then, according to each mycotoxin, the main agronomic criteria are the harvest condition (date and grain moisture), the corn borer infestation and the variety sensitivity to these mycotoxins. Over the years, the database has been used to define models to predict the mycotoxin risk before harvesting. Grain purchasers enter the required agronomic data via the Syngenta Internet site and define their grain purchasing areas. They also define the flowering period for wheat and corn borer infestation for maize. After calculation which integrates climatic data, the purchasers receive reports with forecasts of mycotoxin levels. Prediction is based on different agro-climatic statistical models specifically configured according to the different regions of production in France and Belgium. This approach is called Qualimètre^? and was the first service in France and Belgium to forecast the grain mycotoxin level for wheat in 2004 and maize in 2006.     

Preparation of nanocomposite dispersions based on cellulose whiskers and acrylic copolymer by miniemulsion polymerization: Effect of the silane content

A one‐step method was used to prepare stable aqueous nanocomposite dispersions based on cellulose whiskers extracted from the rachis of the date palm tree and a poly(styrene‐co‐2‐ethyl hexylacrylate) copolymer via miniemulsion polymerization. A reactive silane, i.e., methacryloxypropyl triethoxysilane was added to stabilize the dispersion and favor the anchoring of the whiskers on polymer particles. Dynamic light scattering was used to study the effect of the silane and whiskers contents on the average particle size of the polymer. Nanocomposites materials were prepared from these dispersions using a casting/evaporation method. The effect of the silane and whiskers contents on the thermal and mechanical properties were studied using differential scanning calorimetry and dynamic mechanical analysis. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Identification of tool parallel axis offset through the analysis of the topography of surfaces machined by peripheral milling

A method for the identification of the tool parallel axis offset (TPAO) that occurs when the end mill is held in the spindle is developed. The method is based on the analysis of the topography of surfaces machined by peripheral milling and considers the cutter grinding errors. As known from the literature, TPAO causes each cutting edge to be at a different radius from the spindle axis and creates transition bands in the topography of milled surfaces, in which roughness grooves generated by different teeth blend together. In this paper, the TPAO, defined by the distance of the tool axis from the spindle axis and by an angle relating the offset direction to the position of cutting edges, is expressed as a function of the width of the roughness grooves at any height of the transition bands. This expression allows the TPAO to be estimated by measuring the groove widths at only two heights and solving a system of two linear equations. In order to obtain the groove widths, a procedure based on digital image processing is developed. Through this procedure, the groove widths are estimated at more than the two necessary heights without high computational cost. This leads to the resolution of an overdetermined system of linear equations that allows the TPAO to be identified with more accuracy. Finally in order to verify the predictions of the proposed method, a series of cutting tests were carried out. A reasonable agreement between the experimental results and the predicted ones was found.