Accurate determination of hexanal in beef bouillons by headspace solid‐phase microextraction gas‐chromatography mass‐spectrometry

Lipid oxidation has great impact on the quality of food products through flavor and taste deterioration, reduction in nutritive value, and potential toxicity of the oxidized food components. Flavor and taste deterioration can be easily perceived and it represents one of the major causes of consumer complaints in the food industry. The deterioration of sensory properties is due to the decomposition products of hydroperoxides that easily isomerize and degrade into volatile compounds. Volatile products are responsible for flavor and taste deterioration. In this study, we present the development of the solid‐phase microextraction gas chromatography‐mass spectrometry (SPME‐GC‐MS) technique to quantify low amounts (μg/g range) of secondary oxidation products, i.e. hexanal. The optimization of SPME parameters is a difficult task because of the possibility of further formation of volatile products during analysis. Different parameters such as type of fiber, exposure time of the fiber to the sample headspace and the optimal temperature of absorption have also been investigated. The complete validation of the method was achieved by the determination of linearity, limits of detection and quantification and repeatability. We demonstrated that the SPME method is a valuable tool for the quantification of low amounts of secondary oxidation products such as hexanal. Therefore, this technique can be used to detect early formation of volatiles.     

Crack–Tip Toughness of a Soft Lead Zirconate Titanate

Crack–opening displacement (COD) measurements were performed on a commercial lead zirconate titanate (PZT). The intrinsic fracture toughness (or crack–tip toughness) of this material was determined using a new evaluation procedure, which takes into account the near–tip CODs and complete crack profile CODs. The crack–tip toughness K _I0 was determined from an extrapolation of COD data obtained at various loading stages, thus avoiding the complications caused by subcritical crack growth in PZT. Results for plane strain and plane stress condition are presented.     

Cellulose nanocrystal-mediated assembly of graphene oxide in natural rubber nanocomposites with high electrical conductivity

This study reports a green and powerful strategy for preparing cellulose nanocrystal (CNC)/graphene oxide (GO)/natural rubber (NR) nanocomposites hosting a 3D hierarchical conductive network. Due to good dispersibility and amphiphilic nature of CNC, well dispersed CNC/GO nanohybrids were prepared. Hydrogen bonding interactions between CNC and GO greatly enhanced the stability of the CNC/GO nanohybrids. CNC/GO nanohybrids were introduced into NR latex under sonication and the mixture was cast. Self-assembled CNC/GO nanohybrids preferentially dispersed in the interstice between latex microspheres allowing the construction of a 3D hierarchical conductive network. By combining strong hydrogen bonds and 3D conductive network, both electrical conductivity and mechanical properties (tensile strength and modulus) have been significantly improved. The electrical conductivity of the nanocomposite with 4 wt% GO and 5 wt% CNC exhibited an increase of nine orders of magnitude compared to the nanocomposite with only 4 wt% GO; meanwhile, the electrical percolation threshold was 3-fold lower than for NR/GO composites.     

Mathematical morphology on hypergraphs,application to similarity and positive kernel

The focus of this article is to develop mathematical morphology on hypergraphs. To this aim, we define lattice structures on hypergraphs on which we build mathematical morphology operators. We show some relations between these operators and the hypergraph structure, considering in particular transversals and duality notions. Then, as another contribution, we show how mathematical morphology can be used for classification or matching problems on data represented by hypergraphs: thanks to dilation operators, we define a similarity measure between hypergraphs, and we show that it is a kernel. A distance is finally introduced using this similarity notion.     

An approach using Dempster–Shafer theory to fuse spatial data and satellite image derived crown metrics for estimation of forest stand leading species

Leading species at the forest stand level is a required forest inventory attribute. Information regarding leading species enables the calculation of volume and biomass in support of forest monitoring and reporting activities. In this study, approaches for leading species estimation based upon very high spatial resolution (pixel sided <1 m) have been developed and implemented, with opportunities for improving attribute accuracy using data fusion methods. Over a study region located in the Yukon Territory, Canada, we apply the Dempster–Shafer Theory (DST) to integrate multiple resolutions of satellite imagery (including spatial and spectral), topographic information, and fire disturbance history records for the estimation of leading species.Among the data source combinations tested in the study, the QuickBird panchromatic combined with selected optical channels from Landsat-5 Thematic Mapper (TM) imagery provided the highest overall accuracy (70.4%) for identifying leading species and improved the accuracy by 3.1% over a baseline from a classification-tree based method applied on all data sources. Additional insights to the application of DST to fuse satellite imagery with ancillary data sources to map leading stand species in a boreal environment are also elaborated upon, including the range and distribution of training data and DST mass function establishment.     

Licence de brevet et partage du risque: Résultats de simulation

Annals of Telecommunications - Le partage du risque est une des raisons les plus souvent avancées pour expliquer les clauses financières des contrats de licence. Pour autant, aucune...     

PI k mass production and an optimal circuit for the Nečiporuk slice

Letf: {0,1} ⁿ {0,1} ^m be anm-output Boolean function inn variables.f is called ak-slice iff(x) equals the all-zero vector for allx with Hamming weight less thank andf(x) equals the all-one vector for allx with Hamming weight more thank. Wegener showed that PI _k -set circuits (set circuits over prime implicants of lengthk) are at the heart of any optimum Boolean circuit for ak-slicef. We prove that, in PI _k -set circuits, savings are possible for the mass production of anyFX, i.e., any collectionF ofm output-sets given any collectionX ofn input-sets, if their PI _k -set complexity satisfiesSC _m (FX)3n+2m. This PI _k mass production, which can be used in monotone circuits for slice functions, is then exploited in different ways to obtain a monotone circuit of complexity 3n+o(n) for the Neiporuk slice, thus disproving a conjecture by Wegener that this slice has monotone complexity (n ^3/2). Finally, the new circuit for the Neiporuk slice is proven to be asymptotically optimal, not only with respect to monotone complexity, but also with respect to combinational complexity.     

Hysteresis‐Free 1D Network Mixed Halide‐Perovskite Semitransparent Solar Cells

The morphology of hybrid organic–inorganic perovskite films is known to strongly affect the performance of perovskite‐based solar cells. CH₃NH₃PbI_3‐xCl_x (MAPbI_3‐xCl_x) films have been previously fabricated with 100% surface coverage in glove boxes. In ambient air, fabrication generally relies on solvent engineering to obtain compact films. In contrast, this work explores the potential of altering the perovskites microstructure for solar cell engineering. This work starts with CH₃NH₃PbI_3‐xCl_x, films with grain morphology carefully controlled by varying the deposition speed during the spin‐coating process to fabricate efficient and partially transparent solar cells. Devices produced with a CH₃NH₃PbI_3‐xCl_x film and a compact thick top gold electrode reach a maximum efficiency of 10.2% but display a large photocurrent hysteresis. As it is demonstrated, the introduction of different concentrations of bromide in the precursor solution addresses the hysteresis issues and turns the film morphology into a partially transparent interconnected network of 1D microstructures. This approach leads to semitransparent solar cells with negligible hysteresis and efficiencies up to 7.2%, while allowing average transmission of 17% across the visible spectrum. This work demonstrates that the optimization of the perovskites composition can mitigate the hysteresis effects commonly attributed to the charge trapping within the perovskite film.     

Segment-constrained regression tree estimation of forest stand height from very high spatial resolution panchromatic imagery over a boreal environment

Mean stand height is an important parameter for forest volume and biomass estimation in support of monitoring and management activities. Information on mean stand height is typically obtained through the manual interpretation of aerial photography, often supplemented by the collection of field calibration data. In remote areas where forest management practices may not be spatially exhaustive or where it is difficult to acquire aerial photography, alternate approaches for estimating stand height are required. One approach is to use very high spatial resolution (VHSR) satellite imagery (pixels sided less than 1 m) as a surrogate for air photos. In this research we demonstrate an approach for modelling mean stand height at four sites in the Yukon Territory, Canada, from QuickBird panchromatic imagery. An object-based approach was used to generate homogenous segments from the imagery (analogous to manually delineated forest stands) and an algorithm was used to automatically delineate individual tree crowns within the segments. A regression tree was used to predict mean stand height from stand-level metrics generated from the image grey-levels and within-stand objects relating individual tree crown characteristics. Heights were manually interpreted from the QuickBird imagery and divided into separate sets of calibration and validation data. The effects of calibration data set size and the input metrics used on the regression tree results were also assessed. The approach resulted in a model with a significant R² of 0.53 and an RMSE of 2.84 m. In addition, 84.6% of the stand height estimates were within the acceptable error for photo interpreted heights, as specified by the forest inventory standards of British Columbia. Furthermore, residual errors from the model were smallest for the stands that had larger mean heights (i.e., > 20 m), which aids in reducing error in subsequent estimates of biomass or volume (since stands with larger trees contribute more to overall estimates of volume or biomass). Estimated and manually interpreted heights were reclassified into 5-metre height classes (a schema frequently used for forest analysis and modelling applications) and compared; classes corresponded in 54% of stands assessed, and all stands had an estimated height class that was within ± 1 class of their actual class. This study demonstrates the capacity of VHSR panchromatic imagery (in this case QuickBird) for generating useful estimates of mean stand heights in unmonitored, remote, or inaccessible forest areas.