Quasi‐alternating polyesteramides from ε‐caprolactone and α‐amino acids

Glycine‐ɛ‐caprolactone‐based and α‐alanine‐ɛ‐caprolactone‐based polyesteramides with a strong tendency to form alternating sequences (degree of randomness = 1.64 and 1.31) were synthesized by melt polycondensation of intermediate hydroxy‐ and ethyl ester‐terminated amides. These intermediates were synthesized by the reaction of equimolar amounts of ɛ‐caprolactone and glycine or L‐α‐alanine ethyl esters in mild conditions. The structure and microstructure of these polyesteramides are discussed on the basis of an in‐depth nuclear magnetic resonance study. Both polyesteramides are semi‐crystalline, but the glycine‐based one presents the highest melting enthalpy. This polyesteramide also exhibits higher Young's modulus and stress at break than its α‐ and β‐alanine counterparts. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44220.     

Functionalized liquid natural rubber and liquid epoxidized natural rubber: A promising green toughening agent for polyester

Toughened unsaturated polyester resins (UPRs) were prepared using two different reactive rubbers, namely, liquid natural rubber (LNR) and liquid epoxidized natural rubber (LENR). The effect of varying amounts of LNR and LENR on the morphology, thermal, and mechanical properties of UPR were evaluated. Fourier Transform Infrared spectroscopy was used to investigate the probable crosslinking reaction and changes in the functional groups on crosslinking. Field emission scanning electron microscopy and infinite focus microscopy were used to study the morphology of fracture surfaces. Tensile test showed that both the rubber‐modified resins (1.5 wt %) improved tensile strength. The viscoelastic properties and thermal stability of the toughened polyesters were evaluated using dynamic mechanical thermal analysis and thermogravimetric analysis, respectively. A slight reduction in the glass transition temperature (T_g) of the polyester was reported on the addition of both the rubbers. An increment in impact strength and fracture toughness was observed at 1.5 wt % for LNR and 4.5 wt % for LENR‐modified UPR. The results showed that both the liquid rubbers improved the mechanical properties of UPR. However, LENR‐modified UPR exhibited a more significant improvement in the mechanical properties compared to LNR‐modified UPR. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41292.     

Hydroxyapatite‐barium titanate piezocomposites with enhanced electrical properties

The present work aims to obtain Hydroxyapatite (HA) ‐ Barium Titanate (BT) piezocomposites with improved electrical properties by retaining OH^? ions and tuning BT grain size. Dense piezocomposites of HA‐BT were obtained, using single step Spark Plasma Sintering. The presence of OH^? ions in the sintered piezocomposites of HA‐BT was confirmed by thermal characterization and Fourier transform infrared transmittance. No decomposition/interaction between HA and BT phases were observed in the complete range of temperature studied. The dielectric and pyroelectric properties were studied as a function of temperature (100 K to 450 K) and frequency (100 Hz to 2 MHz). The influence of the ferroelectric grain size (300 and 500 nm) on the electrical properties of HA‐BT has been analyzed. The dielectric permittivity of HA‐BT ceramics can be enhanced with appropriate ferroelectric grain size and volume fraction of BT (<80%).     

Processing and Characterization of Bulk Chalcogenide Glasses Used for Waveguide Applications

Chalcogenide glasses (ChG) are of interest due to their optical and electronic properties for use in waveguide applications. To assess expected uniformity in films deposited from bulk glass starting materials, the extent of parent bulk glass property variation was evaluated. Resulting structural and optical properties of melt-derived ChG's were investigated using X-ray diffraction (XRD), Raman spectroscopy, differential thermal analysis and spectrophotometric analysis. The influence of melt size, purification, and other melting conditions on sample homogeneity were quantified and within-melt property variation of bulk glass samples was found to be less than 5% for all parameters examined.     

Sequenced aeration in a membrane bioreactor: Specific nitrogen removal rates

The aim of this work was to quantify the activity of autotrophic and heterotrophic populations present in a submerged membrane bioreactor submitted to a sequenced aeration, ensuring alternate nitrification and denitrification (BIOSEP® process). Specific nitrification and denitrification rates were determined over a fifteen‐month running period, with and without physico‐chemical phosphorus removal. The results show (i) zero‐order kinetics; (ii) a specific activity independent of MLVSS concentration; and (iii) an evolution of the nitrification kinetics directly linked to an evolution of the nitrifying population within the unit. The study confirmed that denitrification kinetics depend on the concentration and on the nature of wastewater organic matter.     

Evaluation of the termination mode in the radical polymerization of 2,2,2‐trifluoroethyl α‐fluoroacrylate

The mode of termination of 2,2,2‐trifluoroethyl α‐fluoroacrylate (FATRIFE) in radical polymerization was studied, and only termination by recombination occurred, which led to telechelic macromolecular structures. The radical polymerization in acetonitrile was carried out to synthesize oligomers with a low number average degree of polymerization ( )_cum (about 20), using tert‐butylcyclohexyl peroxydicarbonate (TBCPC) as initiator at 75 °C. The initial [TBCPC]₀/[FATRIFE]₀ molar ratio was monitored to evaluate its influence on the ( )_cum of α‐fluoroacrylic oligomers. The ¹H NMR analysis of the polymers showed that the ( )_cum values obtained were higher than 40, in spite of a high C₀ value. To explain these results, the mode of termination was evaluated using the following kinetic law: . The development of kinetic relationships allowed us to calculate the ratio k_prt/k_i·k_p as about 17–30 mol s l^?1, and to confirm that primary radical termination (PRT) was in competition with bimolecular macromolecular termination (BMT). © 2002 Society of Chemical Industry     

Effect of the Fiber Size on the Physicochemical and Mechanical Properties of Composites of Epoxy and Date Palm Tree Fibers

Lignocellulosic fibers from date palm trees were employed to reinforce an epoxy matrix. Two fiber sizes were used, with the length and diameter in the range of 20–30 and 1.5–3 mm, respectively, for the so‐called long fibers, and in the range of 5–15 and 0.25–0.75 mm, respectively, for the so‐called short fibers. The morphologies of the resulting composites, as well as their thermal, mechanical, and water sorption properties were evaluated. Strong interactions between both components and etherification reactions may occur between the hydroxyl groups of the fibers and the epoxy groups of the epoxy‐amine reactive mixture. These effects are emphasized when decreasing the size of the fibers.

     

Improved algorithm for tolerance allocation based on Monte Carlo simulation and discrete optimization

The allocation of design and manufacturing tolerances has a significant effect on both manufacturing cost and quality. This paper considers nonlinearly constrained tolerance allocation problems. The purpose is to minimize the ratio between the sum of the manufacturing costs (tolerances costs) and the risk (probability of the respect of geometrical requirements). The techniques of Monte Carlo simulation and genetic algorithm are adopted to solve these problems. As the simplest and the popular method for non-linear statistical tolerance analysis, the Monte Carlo simulation is introduced into the frame. Moreover, in order to make the frame efficient, the genetic algorithm is improved according to the features of the Monte Carlo simulation. An illustrative example (hyperstatic mechanism) is given to demonstrate the efficiency of the proposed approach.     

Weld bead modeling and process optimization in Hybrid Layered Manufacturing

Hybrid Layered Manufacturing is a Rapid Manufacturing process in which the metallic object is built in layers using weld deposition. Each layer built through overlapping beads is face milled to remove the scales and scallops and ensure Z-accuracy. The formations of single beads and overlapping multiple beads are modeled in this paper. While the individual bead’s geometry is influenced by the size of the filler wire and the speeds of the wire and torch, the step over increment between the consecutive beads additionally comes into the picture for the multiple bead deposition. These models were validated experimentally. They are useful not only to predict the bead’s shape but also to optimize the three process parameters.