Optimal Design of Piezoelectric Modal Transducers

Piezoelectric materials are those having the ability to convert electrical energy into mechanical one, and vice versa. Often surface bonded to structures, they are commonly used for sensing, acting and even for reducing noise and structural vibrations as part of active control systems. And, further, they can isolate specific mode shapes of structures when working as spatial filters in the frequency domain (i.e. modal transducers) by shaping properly the piezoelectric layers. This article is intended to revise that concept, initially conceived for beam-type structures only, and explain how it has been extended to plates and shells by means of optimization techniques.     

The use of acute phase proteins for monitoring animal health and welfare in the pig production chain: The validation of an immunochromatographic method for the detection of elevated levels of pig-MAP

The serum concentration of acute phase proteins (APPs) increases in the presence of disease or stress, which makes APPs notable parameters for the global assessment of animal health and welfare. A rapid, immunochromatographic test (ICT) for the detection of elevated levels of pig Major Acute-phase Protein (pig-MAP), one of the main APPs in pigs, was evaluated in more than 1400 pig serum samples obtained from commercial farms. The ICT showed a good performance with a relative sensitivity (Sn) and specificity (Sp) of 94 and 97%, respectively, for a threshold of 1.5 mg/mL (comparison with ELISA). Differences in the pig-MAP levels and the number of positive samples with the ICT were observed within the season of sampling, farms, and age groups at one farm, according to the presence of disease or lesions. The ICT was also evaluated in blood samples obtained at slaughter in association with the carcase inspection. The results from this study indicate that the ICT may be used for the evaluation of groups of pigs, after analysing one sub-sample of these pigs, and might be a useful tool in routine health and welfare monitoring programmes aimed to improve the quality of pig production.     

METHODS FOR PROCESSING EXPERIMENTAL DRYING KINETICS DATA

This paper provides a review of methods for processing the data obtained from drying kinetics rigs and pilot-plant trials. Different methods for fitting and smoothing drying curves are compared, aiming to generate curves that are usable in industrial design without losing vital information by oversmoothing. Generally, plots of drying rate need more smoothing than moisture content data. Special care is needed at low drying rates and moisture contents. It is shown that some popular methods of processing data, including use of smoothing programs or fitting to equations, may generate drying curves which are seriously in error. Recommendations are made for reliable methods of processing data; cubic splines have been found to be effective for moisture-time curves. It is important to retain the original raw experimental data as a cross-check, as smoothing can conceal valuable information.     

Thermal and mechanical characterization of poly(methyl methacrylate) nanocomposites filled with TiO2 nanorods

Thick films of nanocomposites made of poly(methyl methacrylate) matrix and colloidal anatase TiO₂ nanorods fillers were prepared by solvent mixing and solution drop casting. Different concentrations of nanorods were tested in order to examine the influence of the nanoscale fillers on the composites material properties and structure. The thermal properties of the samples were investigated through thermogravimetric analysis, which showed an increase in thermal stability of the nanocomposites on increasing nanorods concentration, for the range of concentrations used. The viscoelastic properties were investigated through dynamic mechanical analysis, which showed an increase in both the storage and loss modulus on increasing nanorods concentration. The in-depth distribution of the TiO₂ nanorods in the matrix was evaluated through cross-sectional transmission electron microscopy, which pointed out a uniform dispersion of mesoscale nanorods agglomerates with increasing diameter of 100–200 nm range on increasing nanorods concentration.     

Two Subtle Amino Acid Changes in a Transaminase Substantially Enhance or Invert Enantiopreference in Cascade Syntheses

Amine transaminases (ATAs) are powerful enzymes for the stereospecific production of chiral amines. However, the synthesis of amines incorporating more than one stereocenter is still a challenge. We developed a cascade synthesis to access optically active 3‐alkyl‐substituted chiral amines by combining two asymmetric synthesis steps catalyzed by an enoate reductase and ATAs. The ATA wild type from Vibrio fluvialis showed only modest enantioselectivity (14 % de) in the amination of (S)‐3‐methylcyclohexanone, the product of the enoate‐reductase‐catalyzed reaction step. However, by protein engineering we created two variants with substantially improved diastereoselectivities: variant Leu56Val exhibited a higher R selectivity (66 % de) whereas the Leu56Ile substitution caused a switch in enantiopreference to furnish the S‐configured diastereomer (70 % de). Addition of 30 % DMSO further improved the selectivity and facilitated the synthesis of (1R,3S)‐1‐amino‐3‐methylcyclohexane with 89 % de at 87 % conversion.     

Trans-Membrane Area Asymmetry Controls the Shape of Cellular Organelles

Membrane organelles often have complicated shapes and differ in their volume, surface area and membrane curvature. The ratio between the surface area of the cytosolic and luminal leaflets (trans-membrane area asymmetry (TAA)) determines the membrane curvature within different sites of the organelle. Thus, the shape of the organelle could be critically dependent on TAA. Here, using mathematical modeling and stereological measurements of TAA during fast transformation of organelle shapes, we present evidence that suggests that when organelle volume and surface area are constant, TAA can regulate transformation of the shape of the Golgi apparatus, endosomal multivesicular bodies, and microvilli of brush borders of kidney epithelial cells. Extraction of membrane curvature by small spheres, such as COPI-dependent vesicles within the Golgi (extraction of positive curvature), or by intraluminal vesicles within endosomes (extraction of negative curvature) controls the shape of these organelles. For instance, Golgi tubulation is critically dependent on the fusion of COPI vesicles with Golgi cisternae, and vice versa, for the extraction of membrane curvature into 50–60 nm vesicles, to induce transformation of Golgi tubules into cisternae. Also, formation of intraluminal ultra-small vesicles after fusion of endosomes allows equilibration of their TAA, volume and surface area. Finally, when microvilli of the brush border are broken into vesicles and microvilli fragments, TAA of these membranes remains the same as TAA of the microvilli. Thus, TAA has a significant role in transformation of organelle shape when other factors remain constant.