TiCp*(OMe)3 versus Ti(OMe)4 in atomic layer deposition of TiO2 with water--ab initio modelling of atomic layer deposition surface reactions

It is a common finding that titanocene-derived precursors do not yield TiO2 films in ALD with water. For instance, ALD with Ti(OMe)4 and water gives 0.5 A/cycle, while TiCp*(OMe)3 does not show any growth (Me=CH3, Cp* = C5(CH3)5). This is apparently in contradiction with the computed reactivity of the ligands: the energetics of hydrolysis of the gas-phase precursor indicate that TiCp*(OMe)3 is more reactive to ligand elimination than Ti(OMe)4. However such a model of precursor reactivity neglects surface reactions such as adsorption, diffusion and desorption, all of which can have an important effect on ALD growth rate. A more accurate model of the surface reaction is needed to find the reason for the different behaviours of Ti(OMe)4 and TiCp*(OMe)3 in the ALD process. The more realistic surface model is a TiO2 slab that is periodic in three dimensions. These calculations reveal that TiCp*(OMe)3 does not chemisorb in the usual way because of extreme crowding of the Ti centre by Cp* and that this prevents ALD growth.     

Performance analysis of dual switched diversity over correlated Weibull fading channels with co‐channel interference

This paper studies the performance of switch and stay combining (SSC) diversity in the presence of co‐channel interference over correlated Weibull fading channels. SSC diversity based on signal‐to‐interference ratio (SIR) is a low‐complexity and a very efficient technique that reduces fading and co‐channel interference influence. New closed‐form expressions for the probability density function and cumulative distribution function of the output SIR's are derived. These formulas are used in a detailed analysis of the average output SIR and outage probability. The influence of fading severity and correlation coefficient on the optimum switching threshold and system performance is investigated. Monte Carlo simulations are performed to verify obtained theoretical results and determine average bit error rate in detecting binary phase‐shift keying (BPSK), differential BPSK and quadrature amplitude modulation signals. Copyright © 2011 John Wiley & Sons, Ltd.     

Indium tin oxide nanorod electrodes for polymer photovoltaics

We have deposited indium tin oxide (ITO) nanorods on glass and glass/ITO substrates by DC sputtering and by e-beam deposition. The properties of the nanorods deposited by different methods and on different substrates have been investigated. The ITO nanorods were also used as an electrode in bulk heterojunction polymer solar cells. We found that the nanorod morphology and sheet resistance had a significant effect on the solar cell performance, with significant improvements in the efficiency compared to commercial ITO film substrates in all cases except for e-beam deposited nanorods on glass that had high sheet resistance. The best power conversion efficiency achieved was 3.2 % (for sputtered ITO nanorods on ITO), compared to 2.1 % for commercial ITO substrates.     

Toxicity of Metal Oxide Nanoparticles: Mechanisms,Characterization, and Avoiding Experimental Artefacts

Metal oxide nanomaterials are widely used in practical applications and represent a class of nanomaterials with the highest global annual production. Many of those, such as TiO₂ and ZnO, are generally considered non‐toxic due to the lack of toxicity of the bulk material. However, these materials typically exhibit toxicity to bacteria and fungi, and there have been emerging concerns about their ecotoxicity effects. The understanding of the toxicity mechanisms is incomplete, with different studies often reporting contradictory results. The relationship between the material properties and toxicity appears to be complex and diifficult to understand, which is partly due to incomplete characterization of the nanomaterial, and possibly due to experimental artefacts in the characterization of the nanomaterial and/or its interactions with living organisms. This review discusses the comprehensive characterization of metal oxide nanomaterials and the mechanisms of their toxicity.     

Dyes derived from 3‐formyl‐2(1H)‐quinolone – synthesis,spectroscopic characterisation,and their behaviour in the presence of sulfhydryl and non‐sulfhydryl amino acids

Novel dyes based on a 3‐formyl‐2(1H)‐quinolone skeleton were synthesised and characterised using ¹H nuclear magnetic resonance spectroscopy and mass spectrometry. The spectroscopic properties of these dyes, such as their absorption spectra, emission spectra, and quantum fluorescence yields, were also examined. The behaviour of the obtained compounds at a pH of 7.4 in the absence and in the presence of thiol amino acids, such as l ‐cysteine, l ‐glutathione, and N‐acetyl‐l ‐cysteine, were studied. The spectroscopic responses of the tested dyes towards other amino acids were also investigated. A reference compound was synthesised to understand the reaction mechanism between the thiols and the obtained dyes. The experimental results show that the synthesised dyes have the potential to act as sensors for thiols.     

The Composites of PCL and Tetranuclear Titanium(IV)-oxo Complexes as Materials Exhibiting the Photocatalytic and the Antimicrobial Activity

Excessive misuse of antibiotics and antimicrobials has led to a spread of microorganisms resistant to most currently used agents. The resulting global threats has driven the search for new materials with optimal antimicrobial activity and their application in various areas of our lives. In our research, we focused on the formation of composite materials produced by the dispersion of titanium(IV)-oxo complexes (TOCs) in poly(ε-caprolactone) (PCL) matrix, which exhibit optimal antimicrobial activity. TOCs, of the general formula [Ti₄O₂(OⁱBu)₁₀(O₂CR’)₂] (R’ = PhNH₂ (1), C₁₃H₉ (2)) were synthesized as a result of the direct reaction of titanium(IV) isobutoxide and 4-aminobenzoic acid or 9-fluorenecarboxylic acid. The microcrystalline powders of (1) and (2), whose structures were confirmed by infrared (IR) and Raman spectroscopy, were dispersed in PCL matrixes. In this way, the composites PCL + nTOCs (n = 5 and 20 wt.%) were produced. The structure and physicochemical properties were determined on the basis of Raman microscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), electron paramagnetic resonance spectroscopy (EPR), and UV–Vis diffuse reflectance spectroscopy (DRS). The degree of TOCs distribution in the polymer matrix was monitored by scanning electron microscopy (SEM). The addition of TOCs micro grains into the PCL matrix only slightly changed the thermal and mechanical properties of the composite compared to the pure PCL. Among the investigated PCL + TOCs systems, promising antibacterial properties were confirmed for samples of PCL + n(2) (n = 5, 20 wt.%) composites, which simultaneously revealed the best photocatalytic activity in the visible range.     

Effect of Lipopolysaccharide-Induced Inflammatory Challenge on β-Glucuronidase Activity and the Concentration of Quercetin and Its Metabolites in the Choroid Plexus,Blood Plasma and Cerebrospinal Fluid

Quercetin-3-glucuronide (Q3GA), the main phase II metabolite of quercetin (Q) in human plasma, is considered to be a more stable form of Q for transport with the bloodstream to tissues, where it can be potentially deconjugated by β-glucuronidase (β-Gluc) to Q aglycone, which easily enters the brain. This study evaluates the effect of lipopolysaccharide (LPS)-induced acute inflammation on β-Gluc gene expression in the choroid plexus (ChP) and its activity in blood plasma, ChP and cerebrospinal fluid (CSF), and the concentration of Q and its phase II metabolites in blood plasma and CSF. Studies were performed on saline- and LPS-treated adult ewes (n = 40) receiving Q3GA intravenously (n = 16) and on primary rat ChP epithelial cells and human ChP epithelial papilloma cells. We observed that acute inflammation stimulated β-Gluc activity in the ChP and blood plasma, but not in ChP epithelial cells and CSF, and did not affect Q and its phase II metabolite concentrations in plasma and CSF, except Q3GA, for which the plasma concentration was higher 30 min after administration (p < 0.05) in LPS- compared to saline-treated ewes. The lack of Q3GA deconjugation in the ChP observed under physiological and acute inflammatory conditions, however, does not exclude its possible role in the course of neurodegenerative diseases.     

Characterization of γ and γ′ phases in 2<Superscript>nd</Superscript> and 4<Superscript>th</Superscript> generation single crystal nickel-base superalloys

A Ni based single crystal superalloy from the 2^nd generation, PWA 1484, and one from the 4^th generation, PWA 1497, were comparatively studied by scanning electron microscopy, energy dispersive X-ray spectroscopy and nanoindentation technique in an atomic force microscope (NI-AFM) after high temperature creep deformation. During primary creep of both generations of superalloys, γ′ precipitates start to coalesce and grow directionally. Further creep deformation leads to the topological inversion and coarsening of the rafted microstructure. The NI-AFM technique was used for measurements of the hardness of the γ and γ′ phases in as-received and creep deformed samples in various conditions. The g matrix of the PWA 1497 superalloy is on average 0.8 GPa harder than that of PWA 1484 that can be explained by higher content of Re and Ru, since they partition predominantly to the matrix phase.     

Antibacterial,Antibiofilm, and Antiviral Farnesol-Containing Nanoparticles Prevent Staphylococcus aureus from Drug Resistance Development

Multidrug antimicrobial resistance is a constantly growing health care issue associated with increased mortality and morbidity, and huge financial burden. Bacteria frequently form biofilm communities responsible for numerous persistent infections resistant to conventional antibiotics. Herein, novel nanoparticles (NPs) loaded with the natural bactericide farnesol (FSL NPs) are generated using high-intensity ultrasound. The nanoformulation of farnesol improved its antibacterial properties and demonstrated complete eradication of Staphylococcus aureus within less than 3 h, without inducing resistance development, and was able to 100% inhibit the establishment of a drug-resistant S. aureus biofilm. These antibiotic-free nano-antimicrobials also reduced the mature biofilm at a very low concentration of the active agent. In addition to the outstanding antibacterial properties, the engineered nano-entities demonstrated strong antiviral properties and inhibited the spike proteins of SARS-CoV-2 by up to 83%. The novel FSL NPs did not cause skin tissue irritation and did not induce the secretion of anti-inflammatory cytokines in a 3D skin tissue model. These results support the potential of these bio-based nano-actives to replace the existing antibiotics and they may be used for the development of topical pharmaceutic products for controlling microbial skin infections, without inducing resistance development.