EXPERIMENTAL STUDIES OF NUCLEATION PHENOMENA WITHIN THERMAL BOUNDARY LAYERS—INFLUENCE ON CHEMICAL VAPOR DEPOSITION RATE PROCESSES

In carrying out partial vapor condensations using actively cooled surfaces it is known that 'mist' formation can occur within thermal boundary layers (Rosner and Epstein, 1968), dramatically modifying total deposition fluxes. Using a combination of flash-evaporation (Rosner and Liang, 1986) and laser probing techniques, we report new experimental results on binary alkali salt (K₂SO₄ + Na₂SO₄) deposition from combustion gases showing that the deposition rate of potassium sulfate first increases with the addition of sodium sulfate until the concentration of Na₂SO₄ reaches a (target surface temperature dependent) 'threshold' value. Further increases in the concentration of Na₂SO₄ dramatically decrease the total deposition rate of K₂SO₄, implying that potassium sulfate-containing microdroplets are formed within the thermal boundary layer, which, despite their thermophoretic drift toward the target, are not collected as effectively as the 'parent' K₂SO₄-vapor species. Laser light scattering measurements clearly reveal that suspended particles exist near the deposition surface under these conditions. Our experimental results on mass transfer rate and light scattering are consistent with those predicted using laminar boundary layer theory (Castillo and Rosner, 1989b) coupling both binary salt vapor deposition with particle vapor scavenging and deposition. Comparisons of our observed mist onset conditions (implying critical supersaturations near unity) with those expected using homogeneous nucleation theory suggest that the binary alkali sulfate mist nucleation mechanism is, instead, heterogeneous, even in our relatively 'clean' combustion products. Because of the; well-known vapor pressure reduction phenomenon associated here with the formation of non-ideal solutions, binary systems are shown to provide convenient 'vehicles' to investigate BL mist formation onset conditions and CVD-rate consequences without requiring the more extreme surface coolings characteristic of unary condensible vapor systems. An understanding of this dramatic phenomenon, obtained via such laboratory experiments and calculations, will allow its inclusion in future deposition rate calculations of engineering importance.     

What Borromini Might Have Known About Ovals. Ruler and Compass Constructions

This paper is about drawing ovals using a given number of certain parameters. New constructions are displayed, including the case when the symmetry axes are not given. Many of these constructions make use of a recent conjecture by Ragazzo, for which a Euclidean proof is found, thus suggesting it might have been known at the time Borromini chose the ovals for the dome of San Carlo alle Quattro Fontane. A geometric proof of the same conjecture—as well as constructions—in the more general case of eggs and polycentric curves is the subject of the first part of this same research (Mazzotti, a Euclidean approach to eggs and polycentric curves, 2014).     

Chemical and Physical Signals Mediating Conspecific and Heterospecific Aggregation Behavior of First Instar Stink Bugs

We investigated cues that mediate the aggregation behavior of immature pentatomid bugs by using nymphs of six different pentatomid bug species (Nezara viridula, Acrosternum hilare, Chlorochroa ligata, Chlorochroa sayi, Thyanta pallidovirens, and Euschistus conspersus). When first instars of any two species were put together in a Petri dish, they readily formed heterospecific aggregations similar to their natural conspecific aggregations. The chemical profiles of first and second instar nymphs of each species were determined by solvent extraction with pentane, followed by GC-MS analysis. Immature bugs of the different species had some compounds in common, and some that were more species specific. Within a species, there were distinct differences in the profiles of compounds extracted from first and second instars. Bugs did not aggregate around untreated polysulfone beads (1 mm diam) that were glued together in groups approximating bug egg masses, suggesting that tactile cues alone were insufficient to induce aggregation. Furthermore, when tested over a range of doses, groups of polysulfone beads treated with crude whole-body extracts of bugs did not induce or maintain aggregations. However, first instar N. viridula nymphs did respond to beads treated with two of the three major components of bug extracts. 4-Oxo-(E)-2-decenal induced significant aggregations at two doses, whereas tridecane, the major component in extracts from all six species, did not, and (E)-2-decenal was repellent. The repellence of (E)-2-decenal may explain why we and previous researchers were unable to induce aggregations of first instar N. viridula using whole-body extracts.     

1H nuclear magnetic resonance study of polyurethane prepolymers from toluene diisocyanate and polypropylene glycol

Polyurethane prepolymers prepared from toluene 2,4‐diisocyanate, toluene 2,6‐diisocyanate, and polypropylene glycol with a ratio between the isocyanate and hydroxyl groups equal to 2 were analyzed by ¹H nuclear magnetic resonance (NMR) spectroscopy in acetone‐d₆. Different temperatures and concentrations were used. Toluene 2,4‐dimethylurethane and toluene 2,6‐dimethylurethane were synthesized and used as model compounds to assign prepolymers signals. Measurements of spin–lattice relaxation time T₁ by “inversion recovery” experiments were carried out on toluene 2,4‐diisocyanate, toluene 2,6‐diisocyanate, toluene 2,4‐dimethylurethane, toluene 2,6‐dimethylurethane, and polyurethane prepolymers. Differences in T₁ times were used to interpret prepolymers spectra, by means of the strong observed effect on protons due to the presence of adjacent isocyanate groups. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 347–357, 2003     

An International Collaborative Study on Trypsin Inhibitor Assay for Legumes,Cereals, and Related Products

For determining trypsin inhibitor activity (TIA) in soy products, the American Oil Chemists' Society (AOCS) Method Ba 12-75 has been used. It measures differences in absorbance at 410 nm of bovine trypsin activity toward a synthetic substrate (Nα-benzoyl-DL-arginine-p-nitroanilide) in the absence and presence of an inhibitor. Recently, a significantly improved method was developed (JAOCS, 2019, 96:635–645), featuring 5 mL of total assay volume, enzyme-last sequence, and single inhibitor level in duplicate. It is proposed as the AOCS Method Ba 12a-2020. As a part of the AOCS method approval process, a collaborative study involving 12 international laboratories was conducted to evaluate the performance of the proposed method. The study involved measuring TIA in 10 selected test samples plus a blind duplicate. They included soybeans, pulses, cereals, and their processed products (flours, concentrates, and isolates). After rigorous statistical treatment of the data, only three outliers were removed from the data of two samples. Repeatability relative standard deviations (RSDr) for the 11 samples ranged from 0.99% to 5.52%. Reproducibility RSD (RSD_R) ranged from 7.07% to 22.92%, with seven samples having RSD_R around 10% or less. The remaining four samples had very low TIA, and their RSD_R values ranged from 13.34% to 22.92%. The study has demonstrated reliable performance of the proposed AOCS method. Several collaborators carried out additional experiments addressing some aspects of the method, leading to further refinements. The proposed method is undergoing evaluation by the AOCS Uniform Methods Committee for adoption as an Official Method for measuring TIA in various legume and grain products.     

Workflows for Heliophysics

In this paper we describe how we have introduced workflows into the working practices of a community for whom the concept of workflows is very new, namely the heliophysics community. Heliophysics is a branch of astrophysics which studies the Sun and the interactions between the Sun and the planets, by tracking solar events as they travel throughout the Solar system. Heliophysics produces two major challenges for workflow technology. Firstly it is a systems science where research is currently developed by many different communities who need reliable data models and metadata to be able to work together. Thus it has major challenges in the semantics of workflows. Secondly, the problem of time is critical in heliophysics; the workflows must take account of the propagation of events outwards from the sun. They have to address the four dimensional nature of space and time in terms of the indexing of data. We discuss how we have built an environment for Heliophysics workflows building on and extending the Taverna workflow system and utilising the myExperiment site for sharing workflows. We also describe how we have integrated the workflows into the existing practices of the communities involved in Heliophysics by developing a web portal which can hide the technical details from the users, who can concentrate on the data from their scientific point of view rather than on the methods used to integrate and process the data. This work has been developed in the EU Framework 7 project HELIO, and is being disseminated to the worldwide Heliophysics community, since Heliophysics requires integration of effort on a global scale.     

Real-time inverse dynamics control of parallel manipulators using general-purpose multibody software

This work deals with the problem of computing the inverse dynamics of complex constrained mechanical systems for real-time control applications. The main goal is the control of robotic systems using model-based schemes in which the inverse model itself is obtained using a general purpose multibody software, exploiting the redundant coordinate formalism. The resulting control scheme is essentially equivalent to a classical computed torque control, commonly used in robotics applications. This work proposes to use modern general-purpose multibody software to compute the inverse dynamics of complex rigid mechanisms in an efficient way, so that it suits the requirements of realistic real-time applications as well. This task can be very difficult, since it involves a higher number of equations than the relative coordinates approach. The latter is believed to be less general, and may suffer from topology limitations. The use of specialized linear algebra solvers makes this kind of control algorithms usable in real-time for mechanism models of realistic complexity. Numerical results from the simulation of practical applications are presented, consisting in a “delta” robot and a bio-mimetic 11 degrees of freedom manipulator controlled using the same software and the same algorithm.     

Generation and interpretation of parsimonious predictive models for load forecasting in smart heating networks

Applied Intelligence - Forecasting future heat load in smart district heating networks is a key problem for utility companies that need such predictions for optimizing their operational activities....