Manufacturing of CdTe thin film photovoltaic modules

The technology to fabricate CdTe/CdS thin film solar cells can be considered mature for a large-scale production of CdTe-based modules. Several reasons contribute to demonstrate this assertion: a stable efficiency of 16.5% has been demonstrated for 1 cm² laboratory cell and it is expected that an efficiency of 12% can be obtained for 0.6 × 1.2 m² modules; low cost soda lime float glass can be used as a substrate; the amount of source material is at least 100 times less than that used for single crystal modules and is a negligible part of the overall cost. The fabrication process can be completely automated and a production yield of one module every 2 min can be obtained, which implies a production cost substantially less than 1€/W_P. A further cost reduction will render this kind of energy production competitive with the energy obtained from fossil fuels by approaching the so-called grid-parity. Some new companies have recently announced the start of production or plan to do so in the near future. Many of these plants are located in Germany, some in the USA. In Italy, a new company has been constituted in 2008, with the aim of building a factory with a capacity of 18 MW/year. In this article, we will describe and compare the basic principles of CdTe solar cells and modules. We will include an overview of the potentials of these technologies and of the R&D issues under investigation. This paper describes how the large-area mass production of CdTe solar modules is realized in the Italian factory and presents a worldwide overview of the current production activities.     

Influence of water model and nanotube rigidity on the density of water in carbon nanotubes

The density of water calculated through molecular dynamic simulations using different water models and rigid/flexible carbon nanotubes is studied. A previous equation, determined in an earlier work in order to correlate density and nanotube diameter, is tested against these new data. It is demonstrated that this equation provides a reasonable approximation for all the configurations investigated. It is also confirmed that the use of flexible nanotube models does not bring any significant improvement and the average carbon dislocation is small compared to the size of the water molecules. Comparison between SPC/E and TIP3P models, furthermore, shows that the first model leads to polygonal water structures, which are not evident in the other case.     

Bisorbicillinoids Produced by the Fungus <Emphasis Type="Italic">Trichoderma citrinoviride</Emphasis> Affect Feeding Preference of the Aphid <Emphasis Type="Italic">Schizaphis graminum</Emphasis>

We report the effects of some bisorbicillinoids isolated from biomass of the fungus Trichoderma citrinoviride on settling and feeding preference of the aphid Schizaphis graminum. Purification of the fungal metabolites was carried out by a combination of column chromatography and thin-layer chromatography using direct and reverse phases. Chemical identification was performed by spectroscopic methods including nuclear magnetic resonance and mass spectrometry. The identified bisorbicillinoids appeared to be bislongiquinolide, its 16,17-dihydro derivative, trichodimerol, and dihydrotrichodimerol. A feeding preference test with alate morphs of S. graminum was used to identify the active fractions. Among the four bisorbicillinoids, dihydrotrichodimerol and bislongiquinolide influenced aphid feeding preference, restraining specimens from settling on leaves treated with metabolites. Taste neurons sensitive to these compounds, particularly to bislongiquinolide, were located on tarsi of the S. graminum alate morphs.     

Photoprotective Role of Photosynthetic and Non-Photosynthetic Pigments in Phillyrea latifolia: Is Their “Antioxidant” Function Prominent in Leaves Exposed to Severe Summer Drought?

Carotenoids and phenylpropanoids play a dual role of limiting and countering photooxidative stress. We hypothesize that their “antioxidant” function is prominent in plants exposed to summer drought, when climatic conditions exacerbate the light stress. To test this, we conducted a field study on Phillyrea latifolia, a Mediterranean evergreen shrub, carrying out daily physiological and biochemical analyses in spring and summer. We also investigated the functional role of the major phenylpropanoids in different leaf tissues. Summer leaves underwent the most severe drought stress concomitantly with a reduction in radiation use efficiency upon being exposed to intense photooxidative stress, particularly during the central hours of the day. In parallel, a significant daily variation in both carotenoids and phenylpropanoids was observed. Our data suggest that the morning-to-midday increase in zeaxanthin derived from the hydroxylation of ß-carotene to sustain non-photochemical quenching and limit lipid peroxidation in thylakoid membranes. We observed substantial spring-to-summer and morning-to-midday increases in quercetin and luteolin derivatives, mostly in the leaf mesophyll. These findings highlight their importance as antioxidants, countering the drought-induced photooxidative stress. We concluded that seasonal and daily changes in photosynthetic and non-photosynthetic pigments may allow P. latifolia leaves to avoid irreversible photodamage and to cope successfully with the Mediterranean harsh climate.     

Mg-bearing quartz solid solutions as structural intermediates between low and high quartz

Glass powder samples of cordierite composition (doped with 8 mol% TiO₂) were heat-treated to produce a series of increasingly SiO₂-enriched Mg-bearing quartz solid solutions (Qss). The obtained materials were then analyzed by X-ray diffraction: Rietveld structural refinements revealed that Mg-bearing Qss phases possess trigonal symmetry and a compositionally dependent intermediate structural arrangement between those of low and high quartz. High-temperature diffraction measurements were performed up to 700°C to characterize the thermal expansion behavior of the crystals. At SiO₂-rich compositions, a reversible high-to-intermediate inversion of the quartz structure is observed, which shifts with increasing stuffing to lower temperatures than the conventional 573°C for pure quartz. Similarities and differences to the better-established Li-bearing Qss are discussed in the text.     

Corrosion and mechanical properties of plasma electrolytic oxidation‐coated AZ80 magnesium alloy

Plasma electrolytic oxidation (PEO) coatings were produced on AZ80 magnesium alloy in a solution containing silicates and phosphates and working at high current densities with short treatment times. The effect of a sealing treatment in boiling water on corrosion and mechanical properties of the coatings were investigated. Moreover, the corrosion mechanism of the samples with and without the sealing treatment was evaluated. The microstructure of the coatings was characterized with scanning electron microscope observation and X‐ray diffraction analysis. The mechanical properties were evaluated with nanoindentation tests and the corrosion resistance was studied by potentiodynamic polarization, electrochemical impedance spectroscopy, and scanning vibrating electrode technique. The results showed that the sealing did not influence the microstructure and the mechanical properties of the samples and instead produced a remarkable increase in the corrosion resistance. The crevice corrosion, present in the sample without the sealing, was avoided with the treatment in boiling water.     

Cachexia,a Systemic Disease beyond Muscle Atrophy

Cachexia is a complication of dismal prognosis, which often represents the last step of several chronic diseases. For this reason, the comprehension of the molecular drivers of such a condition is crucial for the development of management approaches. Importantly, cachexia is a syndrome affecting various organs, which often results in systemic complications. To date, the majority of the research on cachexia has been focused on skeletal muscle, muscle atrophy being a pivotal cause of weight loss and the major feature associated with the steep reduction in quality of life. Nevertheless, defining the impact of cachexia on other organs is essential to properly comprehend the complexity of such a condition and potentially develop novel therapeutic approaches.     

Different Stages of Quiescence,Senescence, and Cell Stress Identified by Molecular Algorithm Based on the Expression of Ki67, RPS6, and Beta-Galactosidase Activity

During their life span, cells have two possible states: a non-cycling, quiescent state (G0) and a cycling, activated state. Cells may enter a reversible G0 state of quiescence or, alternatively, they may undergo an irreversible G0 state. The latter may be a physiological differentiation or, following a stress event, a senescent status. Discrimination among the several G0 states represents a significant investigation, since quiescence, differentiation, and senescence are progressive phenomena with intermediate transitional stages. We used the expression of Ki67, RPS6, and beta-galactosidase to identify healthy cells that progressively enter and leave quiescence through G0-entry, G0 and G0-alert states. We then evaluated how cells may enter senescence following a genotoxic stressful event. We identified an initial stress stage with the expression of beta-galactosidase and Ki67 proliferation marker. Cells may recover from stress events or become senescent passing through early and late senescence states. Discrimination between quiescence and senescence was based on the expression of RPS6, a marker of active protein synthesis that is present in senescent cells but absent in quiescent cells. Even taking into account that fixed G0 states do not exist, our molecular algorithm may represent a method for identifying turning points of G0 transitional states that continuously change.