Study correlating the bubble phenomenon and electrical signals in underwater wet welding with covered electrodes

The bubble phenomenon in underwater wet welding is very important to the final quality of the weld. A good understanding of the formation and collapse of the bubbles and knowledge of the behaviour of welding parameters during the process can improve the practices used in underwater welding and, consequently, improve the final quality of the weld. This study was developed to understand and try to correlate the phenomenon of growth, detachment and frequency of bubbles with electrical signals during the welding process. Beads were made on plate metal at a depth of 0.50 m, with three types of commercial coated electrodes: E6013, E7024 and E7018. High-speed filming to visualize the process of formation, detachment and counting of the bubbles was performed, along with acquisition of their electrical signals. Thus, it was possible to try to correlate the bubble frequency with the electrical signals observed during the process. It was observed in the current data that the mean number of variations under 5% of the mean current is similar to the mean detachment rate of the bubbles. Therefore, it was concluded that there is a possible relationship between bubble detachment and a determined variation in the current.     

Visceral Adipose Tissue Displays Unique Metabolomic Fingerprints in Obesity,Pre-Diabetes and Type 2 Diabetes

Visceral adipose tissue (VAT) metabolic profiling harbors the potential to disentangle molecular changes underlying obesity-related dysglycemia. In this study, the VAT exometabolome of subjects with obesity and different glycemic statuses are analyzed. The subjects (n = 19) are divided into groups according to body mass index and glycemic status: subjects with obesity and euglycemia (Ob+NGT, n = 5), subjects with obesity and pre-diabetes (Ob+Pre-T2D, n = 5), subjects with obesity and type 2 diabetes under metformin treatment (Ob+T2D, n = 5) and subjects without obesity and with euglycemia (Non-Ob, n = 4), used as controls. VATs are incubated in culture media and extracellular metabolite content is determined by proton nuclear magnetic resonance (¹H-NMR). Glucose consumption is not different between the groups. Pyruvate and pyroglutamate consumption are significantly lower in all groups of subjects with obesity compared to Non-Ob, and significantly lower in Ob+Pre-T2D as compared to Ob+NGT. In contrast, isoleucine consumption is significantly higher in all groups of subjects with obesity, particularly in Ob+Pre-T2D, compared to Non-Ob. Acetate production is also significantly lower in Ob+Pre-T2D compared to Non-Ob. In sum, the VAT metabolic fingerprint is associated with pre-diabetes and characterized by higher isoleucine consumption, accompanied by lower acetate production and pyruvate and pyroglutamate consumption. We propose that glucose metabolism follows different fates within the VAT, depending on the individuals’ health status.     

High accumulation of perfluorooctane sulfonate (PFOS) in marine tucuxi dolphins (Sotalia guianensis) from the Brazilian coast

Perfluorooctane sulfonate (PFOS) and other perfluoroalkyl compounds (PFCs) were measured in liver samples from 29 marine tucuxi dolphins from Rio de Janeiro state (RJ), Brazil. PFC measurement combined liquid chromatography and mass spectrometry, using a CapLC system connected to a Quadrupole-LIT mass spectrometer. PFOS was the only PFC detected and it was so in all samples. PFOS concentrations (ng x g(-1) dw) of dolphins (n=23) from the highly contaminated Guanabara Bay (in RJ) varied between 43 and 2431 as well as between 76 and 427 from areas of RJ other than the quoted bay (n=6). Concentrations of three fetuses and one neonate varied between 664 and 1590. Fetus/mother ratios were calculated in two situations (2.75 and 2.62). It seems that mother-to-calf transference plays important role for relationships between PFOS and age. When a one-year-old male calf presenting 2431 ng x g(-1) dw was excluded from the test, significant correlations were observed between PFOS concentrations and both age and total length. Despite the placental transference, PFOS concentrations were not significantly lower in females than in males. PFOS levels in marine tucuxi dolphins from Guanabara Bay are among the highest detected to date in cetaceans, and this may represent a threat to the small population concerned.     

Lessons learned from Brazilian natural gas industry reform

Over the past decades many countries have reformed their infrastructure industries. Although these reforms have been broadly similar for the most part, aiming at introducing competition in potentially competitive segments, the contexts in which they have been carried out differ. This is due to the past regulatory experience in each country, the maturity of the industry and/or the number of agents when the reform process started. The Brazilian natural gas reform stands out due to the country's singular conditions. The development of the natural gas industry in Brazil was grounded on stepping up supplies through integration with neighboring nations (particularly Bolivia) and establishing a competitive environment by lowering the barriers hampering the arrival of new investors. However, natural gas is located at the crossroads of two main energy chains: oil and hydroelectricity. This article analyzes the Brazilian natural gas reform, and extracts lessons from this process. The low capillarity of transportation and distribution systems continues to be the main bottleneck of the country's natural gas industry. The challenges of the new legal framework are to encourage investments in networks and guarantee supply, to allow the industry to consolidate and mature, against a backdrop of rapid changes in the world market.     

Regulatory mechanism for biomass renewable energy in Brazil,a case study of the Brazilian Babassu oil extraction industry

Brazil has launched the PROINFA program, a regulatory mechanism to incentivize renewable electricity generation. In the light of this new framework, the best economical option for cogeneration was analyzed using one of the biomass resources available in Brazil-Babassu. Thus not only the possible power production but also the potential of such a regulatory tool to enhance the electricity production based on this biomass source, was analyzed. The power production was based on a steam power cycle cogeneration technology within the Babassu palm oil extraction industry in Brazil (Orbignya ssp. (Palmae)). Was used as base for this study: the energetic matrix for the oil extraction plants (for the two main profiles: oil extraction and refining only, and greater vertical integration with the production of other associated products obtained from the Babassu palm oil), utilization of an extraction–condensation turbine, and steam production operating at three levels of temperature and pressure (2.06 MPa/350 °C, 4.56 MPa/420 °C and 6.2 MPa/450 °C). To analyze the economic performance, the framework drawn up by the PROINFA was taken. From the analysis, the best economical/technical option for the design of the cogeneration system was found to be in industrial units with extraction and treatment of crude Babassu oil—steam generation at 4.56 MPa and 420 °C and, for units with a more vertically integrated production scheme—steam generated at 6.2 MPa and 450 °C. As a result, it became clear that the given framework may help the development of new renewable energy sources, but it does not give the necessary threshold to start new projects, neither does it incentive the maximization of the power production for this specific biomass resource.     

A new modeling approach of pressure waves at the inlet of internal combustion engines

This paper presents a new model used to describe the propagation of pressure waves at the inlet systems of internal combustion engine. In the first part, an analogy is made between the compressible air in a pipe and a mechanical ideal mass damper spring system. A new model is then presented and the parameters of this model are determined by the use of an experimental setup (shock tube test bench). With this model, a transfer function is defined in order to link directly the pressure and the air mass flow rate. In the second part, the model is included into an internal combustion engine simulation code. The results obtained with this code are compared to experimental ones which are measured on a one-cylinder engine test bench. This last one is driven by an electric motor in order to study only the effect of the pressure waves on the engine behavior. A good agreement is obtained between the experimental results and the numerical ones and the new approach is an alternative method for modeling the pressure wave phenomena in an internal combustion engine manifold.     

On the impact of the slurry mixing procedure in the electrochemical performance of composite electrodes for Li-ion batteries: A case study for mesocarbon microbeads (MCMB) graphite and Co3O4

The influence of the slurry mixing procedure on the homogeneity and electrochemical performance of composite electrodes for Li-ion batteries was studied. MCMB graphite and Co₃O₄ were used as probe active materials, since they exhibit different reaction mechanisms with lithium. Three different mixing procedures were used, (i) magnetic stirring, (ii) magnetic stirring with additional sonication steps and (iii) ball milling. SEM studies allow to determine that the mixing procedure has a significant effect in the microstructure of the active material. Indeed, ball milling was found to destroy the pristine MCMB microstructure and to induce agglomeration in nanosized Co₃O₄. While magnetic stirring is much less aggressive to that respect, sonication steps were found to enhance the homogeneity of the mixture without inducing major modifications in the microstructure of the materials and hence to have a beneficial impact in the final electrochemical performance.     

Performance of anaerobic bioreactor treating fish-processing plant wastewater pre-hydrolyzed with a solid enzyme pool

The effect of a lipase-rich enzyme preparation produced by the fungus Penicillium simplicissimum on solid-state fermentation was evaluated in a 4.9 L up-flow anaerobic sludge blanket bioreactor (UASB) treating fish-processing plant wastewater containing 1500 mg oil and grease (O&G)/L. The oil and grease hydrolysis step was carried out with 0.5% or 0.2% (w/v) of the solid enzyme preparation (SEP) at 30 °C for 8 h. The bioreactor operated at 30 °C with a hydraulic retention time of 10 h for a period of over 100 days, showed high total COD removal efficiencies (85.3% for 0.5% SEP and 90.9% for 0.2% SEP), when fed with pre-hydrolyzed wastewater, compared to a Control bioreactor fed with raw wastewater (79.9%). The Control bioreactor also showed high oil and grease accumulation in the biomass throughout the operational period (the O&G content reached 1.7 times that found in the inoculum of the UASB bioreactor), intensive scum formation, and several episodes of cessation of treatment to clean the three-phase separator. Thus it can be concluded that the enzyme pre-hydrolysis step together with anaerobic treatment of the fish-processing plant wastewater improved the quality of the treated effluent and reduced operational problems.     

Erratum: A wavelet‐based approach for large wind power ramp characterization

The large and rapid variations (ramp events) of wind power output experienced in wind farms and portfolios represent one of the main challenges facing short‐term wind power forecasting. In countries with high wind power penetration, a ramp event forecasting tool is required by transmission system operators and energy traders to schedule ancillary services properly and minimize economic penalties in liberalized electricity markets, respectively. From the forecaster/modeller's point of view, locating ramp events within a wind power time series is important, because it allows them to regard meteorological processes and operational states of the wind farm in the proper time periods to analyse the ramp causes. This work introduces the ramp function as a means of characterizing the ramp performance of a wind power time series. The underlying idea is that a ramp event is characterized by high‐power output gradients evaluated under different time scales. The ramp function is based on the wavelet transform and provides a continuous index related to the ramp intensity at each time step, which permits to take into account the fuzzy limits of the ramp notion, as well as the development of new approaches to wind power ramp analysis that are not feasible from a binary classification standpoint. Several advantages of the ramp function for end‐users are outlined, and applications concerning different aspects of ramp forecasting are described for several wind farms located in Spain. Copyright © 2013 John Wiley & Sons, Ltd.     

Experimental investigation of a pulsating heat pipe for hybrid vehicle applications

This paper deals with the experimental results of an unlooped pulsating heat pipe (PHP) developed and tested in an electronic thermal management field with hybrid vehicle applications in mind. The 2.5 mm inner tube diameter device was cooled by an air heat exchanger to replicate the environment of a vehicle.In order to characterize this pulsating heat pipe, four working fluids have been tested. They are acetone, methanol, water, and n-pentane, with applied thermal power ranging from 25 W to 550 W, air temperature ranging from 10 °C to 60 °C and air velocity ranging from 0.25 m s^?1 to 2 m s^?1. Three inclinations have also been tested according to their horizontal positions: +45° (condenser above the evaporator), 0° and ?45° (condenser below the evaporator).Among the different results, some of the most revelatory were obtained with regard to unfavourable inclination (?45°), for which the performances were very interesting considering a terrestrial application. On the other hand, one also observed low temperature limitations for water as a working fluid and degradation of performances for n-pentane tested at 60 °C air temperature. On an overall basis, however, it should be noted that the PHP functioned with high reliability and reproducibility and without any failure during the start-up or working stage.