Evaluation of the effect of heat input in superduplex stainless steel deposition by the plasma powder process*

Plasma powder surfacing is one of the latest processes for application of coatings, with control of dilution as its main feature. Surfacing with superduplex stainless steels is an interesting option for the construction and repair of equipment for applications in a highly corrosive environment, allowing the desired characteristics to be achieved: corrosion resistance and good mechanical properties. The aim of this work is to assess the ferrite content in the weld metal and the mechanical characteristics via microhardness profiles in surfacing of C-Mn steel pipes with deposition of UNS S32760 by plasma powder surfacing. Welding operations were carried out on pipes with deposition of SDSS, employing three welding heat input levels, varying the welding speed or the welding current. Then the geometry was analysed, the ferrite content in the weld metal was quantified and the microhardness profile was recorded. Variation in welding heat input caused changes in weld bead geometry, with variation in the welding current producing the most significant changes. Increase in heat input caused decrease in ferrite content of the weld metal. Regarding microhardness, only the condition with a higher level of welding current gave sufficiently high levels of microhardness in the weld metal.     

Some comments about “Comment on hardness definitions”, by J. Malzbender [J. Eur. Ceram. Soc. 23 (2003) 1355–1359]

Malzbender has suggested a model to determine hardness and elastic modulus as a function of the mechanical energies involved during tip penetration in instrumented indentations tests. However, the values obtained with these expressions are not consistent with the ones determined by the well-accepted Oliver and Pharr method. After revision, based on Malzbender's study itself, equations were rewritten and then, the obtained indentation hardness (H) for soda-lime glass was in agreement with the literature data. However, the reduced elastic modulus (E_r) was still about 20% higher than the values in the literature. Developing Malzbender's proposal by the inclusions of additional mechanical energy assumptions, a new expression for E_r is now suggested. Using the new expression, the hardness and reduced elastic modulus agreed very well with the Oliver and Pharr method.     

Mechanical and dynamic mechanical analysis of hybrid composites molded by resin transfer molding

This work aims to evaluate the performance of glass/sisal hybrid composites focusing on mechanical (flexural and impact) and dynamic mechanical analyses (DMTA). Hybrid composites with different fiber loadings and different volume ratios between glass and sisal were studied. The effect of the fiber length has also been investigated. The densities of the composites were compared with the theoretical values, showing agreement with the rule of mixtures. The results obtained in the flexural and impact analysis revealed that, in general, the properties were always higher for higher overall reinforcement content. By DMTA, an increase in the storage and loss modulus was found, as well as a shift to higher values for higher glass loading and overall fiber volume. It was also noticed an increase in the efficiency of the filler and the calculated activation energy for the relaxation process in the glass transition region. The fiber length did not significantly change the results observed in all analyses carried out in this work. The calculated adhesion factor increased for higher glass loadings, meaning the equation may not be applied for the system studied and there are other factors, besides adhesion influencing energy dissipation of the composites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Quantification of clay dispersion in nanocomposites of styrenic polymers

Polymer‐clay nanocomposites are materials with many interesting structures, properties, and potential applications. Microstructural evaluation of a nanocomposite is not an easy task, as clay may form hierarchical structures which may look different when observed at various magnifications under a microscope, and also as the concepts of “intercalation” and “exfoliation” are not self‐sufficient to describe its morphology. In this work polymer‐clay nanocomposites of polystyrene and two styrene‐containing block copolymers (styrene‐butadiene‐styrene and styrene‐ethylene/butylene‐styrene) were prepared using three different techniques. Clay dispersion was evaluated by a recently developed microscopy image analysis procedure, combining the analysis of optical and transmission electron micrographs, and the characterization was complemented by X‐ray diffraction and rheological measurements. The results showed better clay dispersion for both block copolymers nanocomposites, mainly due to their molecular architectures. Moreover, the techniques which showed the best results involved mixing the materials in a solvent medium. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

Influence of chemical structure of hardener on mechanical and adhesive properties of epoxy polymers

The mechanical and adhesive properties of epoxy formulations based on diglycidyl ether of bisphenol A cured with various aliphatic amines were evaluated in the glass state. Impact and uniaxial compression tests were used to determine the impact energy, elastic modulus and yield stress, respectively. The adhesion tests were carried out in steel–steel joints using single‐lap shear, T‐peel, and impact adhesive joints geometry. The better mechanical and adhesive behavior of the networks is obtained when exists high flexibility of chain between crosslink and/or high elastic modulus. The 1‐(2‐aminoethyl)piperazine epoxy network presents the best adhesive properties, high flexibility, and the largest impact energy. However, it possesses low elastic modulus and yield stress. Also, exhibits increases in peel strength and impact energy while reductions in lap shear strength. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Study correlating the bubble phenomenon and electrical signals in underwater wet welding with covered electrodes

The bubble phenomenon in underwater wet welding is very important to the final quality of the weld. A good understanding of the formation and collapse of the bubbles and knowledge of the behaviour of welding parameters during the process can improve the practices used in underwater welding and, consequently, improve the final quality of the weld. This study was developed to understand and try to correlate the phenomenon of growth, detachment and frequency of bubbles with electrical signals during the welding process. Beads were made on plate metal at a depth of 0.50 m, with three types of commercial coated electrodes: E6013, E7024 and E7018. High-speed filming to visualize the process of formation, detachment and counting of the bubbles was performed, along with acquisition of their electrical signals. Thus, it was possible to try to correlate the bubble frequency with the electrical signals observed during the process. It was observed in the current data that the mean number of variations under 5% of the mean current is similar to the mean detachment rate of the bubbles. Therefore, it was concluded that there is a possible relationship between bubble detachment and a determined variation in the current.     

Target Score—A Proteomics Data Selection Tool Applied to Esophageal Cancer Identifies GLUT1-Sialyl Tn Glycoforms as Biomarkers of Cancer Aggressiveness

Esophageal cancer (EC) is a life-threatening disease, demanding the discovery of new biomarkers and molecular targets for precision oncology. Aberrantly glycosylated proteins hold tremendous potential towards this objective. In the current study, a series of esophageal squamous cell carcinomas (ESCC) and EC-derived circulating tumor cells (CTCs) were screened by immunoassays for the sialyl-Tn (STn) antigen, a glycan rarely expressed in healthy tissues and widely observed in aggressive gastrointestinal cancers. An ESCC cell model was glycoengineered to express STn and characterized in relation to cell proliferation and invasion in vitro. STn was found to be widely present in ESCC (70% of tumors) and in CTCs in 20% of patients, being associated with general recurrence and reduced survival. Furthermore, STn expression in ESCC cells increased invasion in vitro, while reducing cancer cells proliferation. In parallel, an ESCC mass spectrometry-based proteomics dataset, obtained from the PRIDE database, was comprehensively interrogated for abnormally glycosylated proteins. Data integration with the Target Score, an algorithm developed in-house, pinpointed the glucose transporter type 1 (GLUT1) as a biomarker of poor prognosis. GLUT1-STn glycoproteoforms were latter identified in tumor tissues in patients facing worst prognosis. Furthermore, healthy human tissues analysis suggested that STn glycosylation provided cancer specificity to GLUT1. In conclusion, STn is a biomarker of worst prognosis in EC and GLUT1-STn glycoforms may be used to increase its specificity on the stratification and targeting of aggressive ESCC forms.     

Envelopes with microplastics generated from recycled plastic bags for crude oil sorption

Oil spill accidents in marine environments and the lack of disposal of post-consumer plastic are environmental problems worldwide. This study presents a sustainable alternative for both issues through envelopes filled with microplastics (MPs) from recycled bags for the sorption of spilled crude oil. Through particle size analysis by three different sieves (4, 9, and 20 mesh), different MP sizes were characterized by scanning electron microscope (SEM), Brunauer–Emmett–Teller (BET), density, contact angle (CA), and Fourier-transform infrared spectroscopy (FTIR). According to their sizes, the MPs were distributed in envelopes and submitted to crude oil sorption capacity and efficiency evaluation. Three MP particle sizes were obtained (from the largest to the smallest, according to the sieve mesh, MP4, MP9, and MP20). SEM images of samples exhibited irregular and porous surfaces, and MP4 had the smallest pore size (8.6 μm). BET showed that MP4 had the highest surface area (0.074 m²/g). The CA > 90° exposed that all samples were hydrophobic. FTIR spectrum demonstrated that the samples from the recycled bags were made of high density polyethylene (HDPE). The MP4 envelopes also had the best crude oil sorption results in capacity and efficiency (1.73 g/g and 68%, respectively), being a promising recycled sorbent in crude oil spillage applications.     

Visceral Adipose Tissue Displays Unique Metabolomic Fingerprints in Obesity,Pre-Diabetes and Type 2 Diabetes

Visceral adipose tissue (VAT) metabolic profiling harbors the potential to disentangle molecular changes underlying obesity-related dysglycemia. In this study, the VAT exometabolome of subjects with obesity and different glycemic statuses are analyzed. The subjects (n = 19) are divided into groups according to body mass index and glycemic status: subjects with obesity and euglycemia (Ob+NGT, n = 5), subjects with obesity and pre-diabetes (Ob+Pre-T2D, n = 5), subjects with obesity and type 2 diabetes under metformin treatment (Ob+T2D, n = 5) and subjects without obesity and with euglycemia (Non-Ob, n = 4), used as controls. VATs are incubated in culture media and extracellular metabolite content is determined by proton nuclear magnetic resonance (¹H-NMR). Glucose consumption is not different between the groups. Pyruvate and pyroglutamate consumption are significantly lower in all groups of subjects with obesity compared to Non-Ob, and significantly lower in Ob+Pre-T2D as compared to Ob+NGT. In contrast, isoleucine consumption is significantly higher in all groups of subjects with obesity, particularly in Ob+Pre-T2D, compared to Non-Ob. Acetate production is also significantly lower in Ob+Pre-T2D compared to Non-Ob. In sum, the VAT metabolic fingerprint is associated with pre-diabetes and characterized by higher isoleucine consumption, accompanied by lower acetate production and pyruvate and pyroglutamate consumption. We propose that glucose metabolism follows different fates within the VAT, depending on the individuals’ health status.