On the interrelation of rubber elastic stress-strain curves under different types of strain

With specially shaped samples it is possible to study the stress-strain relation σ(γ) in simple shear up to large shear deformation γ. Measurements of σ(γ) on synthetic polyisoprene, IR 305, differently crosslinked with dicumylperoxide, are reported and compared with those for uniaxial extension on the same materials. Using the simple deformation geometry including shearbands proposed in the meander model (1), both stress-strain relations can be converted into each other. These results favor the applied superstructural model and moreover show that the deformation behavior of rubbers is governed by one material law, σ(γ).     

A Complete and Highly Effective Mothproofing Agent Comprising a Pyrethroid and a Hexahydropyrimidine

Pyrethroids, considered as a general class of compounds, have been shown to provide effective protection from the larvae of the keratin-digesting insects Tineola bisselliella H., Tinea pellionella Linn., Hofmannophila pseudo-spretella Station and Attagenus piceus Oliv. The position regarding the susceptibility of the furniture carpet beetle to pyrethroids is less clear, however. It has been reported that both deltamethrin and permethrin are effective against Anthrenus flavipes Le Conte, whilst permethrin is also reported elsewhere to be effective against the same species. Results obtained in our laboratory, however, have indicated that pyrethroids may offer inadequate protection against Anthrenus vorax Waterh. [1, 2]. This latter species is identical to Anthrenus flavipes var. seminiveus Casey, a colour variety of Anthrenus flavipes Le Conte. The 1,3-disubstituted5-phenylcarbamoyl-2,4,6-trioxo- and 4,6-dioxo-2-thione-hexahydropyrimidine derivatives described in this paper exhibit a surprisingly high and selective toxicity to the Anthrenus species. Thus, a combination of an appropriate hexahydropyrimidine with a suitable pyrethroid, e.g. permethrin, provides complete control of a wide range of commonly encountered textile insect pests. The influence of substituents on the mothproofing activity is discussed.     

The distribution and phylogenetic significance of desmethylsterols inChenopodium andAtriplex: Coexistence of Δ7- and Δ5 -sterols

Twenty-one species in the Chenopodiaceae were analyzed for sterol composition. In ten of eleven species ofChenopodium, the major desmethylsterols were Δ⁷-sterols accompanied by lower proportions of Δ⁵-sterols. InC. fremontii this pattern was reversed. The sterol profiles of five species ofAtriplex were characterized by the coexistence of Δ⁷- and Δ⁵-sterols in ratios of 0.3∶1 to 0.4∶1. MaleAtriplex plants contained higher proportions of Δ⁵-sterols than femaleAtriplex plants. OneCeratoides and twoSalicornia species contained Δ⁵-sterols as their predominant sterols.     

Organo-zincate molten salts as immobilising agents for organometallic catalysis

The combination of 1-n-butyl-3-methylimidazolium chloride with ZnCl₂ affords ionic mixtures with different melting point temperatures depending on the zinc molar fraction. RuCl₂(PPh₃)₃ immobilised in the low melting mixture (60°C) promotes the 1-hexene hydrogenation (turnover frequencies up to 44 min^–1) and the recovered solid catalyst phase can be reused several times.     

Upcycling of polypropylene with various concentrations of peroxydicarbonate and dilauroyl peroxide and two processing steps

The influence of two peroxides (peroxydicarbonate/dilauroyl peroxide) with various concentrations (10–200 mmol/kg PP) and their effective opportunity to introduce long chain branched (LCB) were investigated. The dependence of a single and double extrusion step and the changes of the properties were studied. Experiments were carried out in a single screw extruder at 180°C for the first extrusion step (modification) and at 240°C for the second extrusion step (processing simulation). Melt flow rate and dynamic rheological properties were studied at a measuring temperature of 230°C. For the definitive determination of long chain branched polypropylene (LCB-PP) served the extensional rheology measurements. The mechanical properties were examined via tensile test and impact tensile test. Summarized, LCB (melt strength) could be observed via extensional rheology for all modified specimens and the mechanical properties were maintained or even improved for the modified samples. Particularly, samples containing dilauroyl peroxide display excellent mechanical properties in this study.     

Influence of Plasma Instabilities in Ceramic Suspension Plasma Spraying

Direct current Suspension Plasma Spraying (SPS) allows depositing finely structured coatings. This article presents an analysis of the influence of plasma instabilities on the yttria-stabilized suspension drops fragmentation. A particular attention is paid to the treatment of suspension jet or drops according to the importance of voltage fluctuations (linked to those of the arc root) and depending on the different spray parameters such as the plasma forming gas mixture composition and mass flow rate and the suspension momentum. By observing the suspension drops injection with a fast shutter camera and a laser flash sheet triggered by a defined transient voltage level of the plasma torch, the influence of plasma fluctuations on jet or drops fragmentation is studied through the deviation and dispersion trajectories of droplets within the plasma jet. This article is an invited paper selected from presentations at the 2007 International Thermal Spray Conference and has been expanded from the original presentation. It is simultaneously published in Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007.     

Genetic programming for QoS-aware web service composition and selection

Web services, which can be described as functionality modules invoked over a network as part of a larger application are often used in software development. Instead of occasionally incorporating some of these services in an application, they can be thought of as fundamental building blocks that are combined in a process known as Web service composition. Manually creating compositions from a large number of candidate services is very time consuming, and developing techniques for achieving this objective in an automated manner becomes an active research field. One promising group of techniques encompasses evolutionary computing, which can effectively tackle the large search spaces characteristic of the composition problem. Therefore, this paper proposes the use of genetic programming for Web service composition, investigating three variations to ensure the creation of functionally correct solutions that are also optimised according to their quality of service. A variety of comparisons are carried out between these variations and two particle swarm optimisation approaches, with results showing that there is likely a trade-off between execution time and the quality of solutions when employing genetic programming and particle swarm optimisation. Even though genetic programming has a higher execution time for most datasets, the results indicate that it scales better than particle swarm optimisation.     

One-Way Functions Using Algorithmic and Classical Information Theories

We prove several results relating injective one-way functions, time-bounded conditional Kolmogorov complexity, and time-bounded conditional entropy. First we establish a connection between injective, strong and weak one-way functions and the expected value of the polynomial time-bounded Kolmogorov complexity, denoted here by?E(K ^t (x|f(x))). These results are in both directions. More precisely, conditions on?E(K ^t (x|f(x))) that imply that?f is a weak one-way function, and properties of?E(K ^t (x|f(x))) that are implied by the fact that?f is a strong one-way function. In particular, we prove a separation result: based on the concept of time-bounded Kolmogorov complexity, we find an interval in which every function?f is a necessarily weak but not a strong one-way function. Then we propose an individual approach to injective one-way functions based on Kolmogorov complexity, defining Kolmogorov one-way functions and prove some relationships between the new proposal and the classical definition of one-way functions, showing that a Kolmogorov one-way function is also a deterministic one-way function. A relationship between Kolmogorov one-way functions and the conjecture of polynomial time symmetry of information is also proved. Finally, we relate?E(K ^t (x|f(x))) and two forms of time-bounded entropy, the unpredictable entropy?H ^unp, in which ??one-wayness?? of a function can be easily expressed, and the Yao⁺ entropy, a measure based on compression/decompression schema in which only the decompressor is restricted to be time-bounded.