Carbon nanotube-based polymer composites: A trade-off between manufacturing cost and mechanical performance

A methodology was devised to evaluate the newly-developed carbon nanotube reinforced polymer composites by means of mechanical performance and manufacturing cost. Glass fibre reinforced-epoxy composite plates were produced having different parameters: (a) three manufacturing processes, (b) geometrical dimensions, (c) carbon nanotubes concentration in the epoxy resin and finally (d) modified resin infusion temperature. Tensile coupons were machined out of the manufactured plates and their quasi-static mechanical properties were evaluated. Three cost models were developed to assess plates and tensile coupons manufacturing cost for each different case. Optimal values were evaluated for major manufacturing parameters, driving force being the mechanical properties of interest (quality) as well as their low manufacturing cost. It is demonstrated that the added cost to manufacture such nano-reinforced composites is attributed to increase strength on the expense of ductility; the main benefit of the carbon nanotube-based polymer composites seems to be their ability to be monitored. Almost 20% added cost is paid to attain this new function of piezo-resistivity for the RTM process, while this amount further increases for the non-automated processes such as the Hand Lay-up.     

Open Mobile Alliance (OMA) security layer: Architecture, implementation and performance evaluation of the integrity unit

Security has become a very critical issue in the provision of mobile services. The Open Mobile Alliance (OMA) has specified a powerful security layer, the WTLS. In this paper, a VLSI architecture for the implementation of the WTLS integrity unit is proposed. The proposed architecture is reconfigurable in the sense that operates in three different modes: as Keyed-Hash Authentication Code (HMAC), as SHA-1 and MD5 hash functions, according to WTLS specifications. This multi-mode operation is achieved due to the reconfigurable applied design technique in the proposed architecture, which keeps the allocated area resources at a minimized level. The proposed architecture achieves high speed performance, due to the pipeline designed architecture. Especially, SHA-1 operation achieved throughput is equal to 1,7 Gbps, while MD5 operation mode bit rate is equal to 2,1 Gbps. The proposed architecture has been integrated by using VHDL and has been synthesized placed and routed in an FPGA device. Comparisons with related hash functions implementations have been done in terms of throughput, operating frequency, allocated area and Area-Delay product. The achieved performance of the SHA-1 operation mode is better at about 14–42 times compared with the other conventional works. In addition, MD5 performance is superior to the other works at about 6–18 times, in all of the cases. The proposed Integrity Unit is a very trustful and powerful solution for the WTLS layer. In addition, it can be integrated in security systems which are used for the implementation networks for wireless protocols, with special needs of integrity in data transmission. Nicolas Sklavos, Ph.D.: He is a Ph.D. Researcher with the Electrical and Computer Engineering Department, University of Patras, Greece. His interests include computer security, new encryption algorithms design, wireless communications and reconfigurable computing. He received an award for his Ph.D. thesis on “VLSI Designs of Wireless Communications Security Systems” from IFIP VLSI SOC 2003. He is a referee of International Journals and Conferences. He is a member of the IEEE, the Technical Chamber of Greece and the Greek Electrical Engineering Society. He has authored or co-authored up to 50 scientific articles in the areas of his research. Paris Kitsos, Ph.D.: He is currently pursuing his Ph.D. in the Department of Electrical and computer Engineering, University of Patras, Greece. He received the B.S. in Physics from the University of Patras in 1999. His research interests include VLSI design, hardware implementations of cryptography algorithms, security protocols for wireless communication systems and Galois field arithmetic implementations. He has published many technical papers in the areas of his research. Epaminondas Alexopoulos: He is a student of the Department of Electrical and Computer Engineering, University of Patras, Greece. His research includes hardware implementations, mobile computing and security. He has published papers in the areas of his research. Odysseas Koufopavlou, Ph.D.: He received the Diploma of Electrical Engineering in 1983 and the Ph.D. degree in Electrical Engineering in 1990, both from University of Patras, Greece. From 1990 to 1994 he was at the IBM Thomas J. Watson Research Center, Yorktown Heights, NY, USA. He is currently an Associate Professor at the Department of Electrical and Computer Engineering, University of Patras. His research interests include VLSI, low power design, VLSI crypto systems and high performance communication subsystems architecture and implementation. He has published more than 100 technical papers and received patents and inventions in these areas.     

Radar Systems Considerations for Phased Array Aperture Design Using Conformal Transformations on Riemannian Manifolds

Static and rotating phased array radars are analyzed using conformal co-ordinate transformations on Riemann manifolds. By the use of a suitable metric tensor on a Riemann surface we obtain an expression for the parametric distance between two points that is used to calculate the area of surveillance mapped on to the vv-plane. The invariance of the beamwidth in vv-space allows us to determine the total number of beams required for scanning while the total search function time is obtained as an integral representing the volume under a Riemann time-manifold. Co-ordinate transformations are obtained for rotating arrays based on Sanson-Flamteed projections and we derive the corresponding search function times for each radar type. The packing densities of the beams are examined for both static and rotating arrays and we examine the number of radiating elements that are required so that free-space surveillance time is maintained on the basis of the number of array faces in simultaneous use.     

The RCS of a microstrip patch on an arbitrarily biased ferritesubstrate

The radar cross section (RCS) of a rectangular microstrip patch on a lossy biased ferrite substrate is investigated. The analysis is based on a full-wave integral equation formulation in conjunction with the method of moments. In the analysis, the direction of the bias field is not prescribed. The RCS characteristics, especially the resonance behavior of a patch with various biasing conditions, are studied and compared to those for an unbiased ferrite. It is found that the resonant frequencies of a patch vary significantly with the change of the bias field, except for those resonant modes which have a dominant magnetic-field component in the direction of the bias field. This phenomenon is explained with a waveguide cavity model, and provides an independent check of the analysis. It is found that the magnetic loss affects the RCS at resonances significantly     

Electrocardiographic appearance of a non-Q wave acute myocardial infarction in a patient with thyrotoxicosis. A case history

A patient with severe thyrotoxicosis developed the typical electrocardiographic (ECG) evolution of a non-q myocardial infarction. This occurred without evidence of myocardial necrosis and in the absence of coronary artery disease. Treatment with beta blockers resolved the ECG changes despite the persistence of the thyrotoxic state.     

Immunohistochemical and ultrastructural characterization of the initial post-hatching development of bovine embryos

The problems of sustaining placenta formation in embryos produced by nuclear transfer have emphasized the need for basic knowledge about epiblast formation and gastrulation in bovine embryos. The aims of this study were to define stages of bovine post-hatching embryonic development and to analyse functional mechanisms of germ-layer formation. Embryos developed in vivo were collected after slaughter from superovulated cows on days 9, 11, 14 and 21 after insemination and processed for transmission electron microscopy (n = 26) or immunohistochemistry (n = 27) for potential germ-layer characterization (cytokeratin 8 for potential ectoderm; alpha-1-fetoprotein for potential endoderm; and vimentin for potential mesoderm). On day 9, the embryos were devoid of zona pellucida and presented a well-defined inner cell mass (ICM), which was covered by a thin layer of trophoblast cells (the Rauber's layer). Formation of the hypoblast from the inside of the ICM was ongoing. On day 11, the Rauber's layer was focally interrupted and adjacent underlying ICM cells formed tight junctions. The hypoblast, which formed a thin confluent cell layer, was separated from the ICM and the tropho-blast by intercellular matrix. The embryos were ovoid to tubular and displayed a confluent hypoblast on day 14. The epiblast was inserted into the trophoblast epithelium and tight junctions and desmosomes were present between adjacent epiblast cells as well as between peripheral epiblast and trophoblast cells. In some embryos, the epiblast was more or less covered by foldings of trophoblast in the process of forming the amniotic cavity. Cytokeratin 8 was localized to the trophoblast and the hypoblast underlying the epiblast; alpha-1-fetoprotein was localized to most hypoblast cells underlying the trophoblast; and vimentin was localized to most epiblast cells. On day 21, the smallest embryos displayed a primitive streak and formation of the neural groove, whereas the largest embryos presented a neural tube, up to 14 somites and allantois development. These embryos depicted the gradual formation of the endoderm, mesoderm and ectoderm as well as differentiation of paraxial, intermediate and lateral plate mesoderm. Cytokeratin 8 was localized to the trophoblast, the hypoblast and the surface and neural ectoderm; and alpha-1-fetoprotein was localized to the hypoblast, but not the definitive endoderm, the intensity increasing with development. Vimentin was initially localized to some, but not all, cells positioned particularly in the ventral region of the primitive streak, to presumptive definitive endoderm cells inserted into the hypoblast, and to mesoderm. In conclusion, within 2 weeks of hatching, bovine embryos complete formation of the hypoblast and the epiblast, establishment of the amniotic cavity, ingression of epiblast cells for primitive streak formation, involution of cells through the node and the streak for endoderm and mesoderm fomation, neurulation and differentiation of the mesoderm. The recruitment of cells from the epiblast to form the primitive streak as well as the endoderm and mesoderm is associated with expression of the intermediate filament vimentin.     

Antenna beam scanning by active impedance loading

The concept of antenna beam steering by variable surface impedance loading is investigated. It is shown, as an example, that if an electric dipole is mounted over a prolate spheroid with a variable surface impedance, then the radiated beam can be scanned considerably. This is achieved provided that the real part of the surface impedance can obtain both negative and positive values. The possible realization of such a scheme is briefly discussed.     

Stripline-fed arbitrarily shaped printed-aperture antennas

A full-wave analysis method is presented for modeling the radiation properties of a stripline-fed planar printed-aperture antenna element. In this formulation, both the finite length of stripline and the finite aperture may be of any arbitrary shape since their equivalent electric and magnetic currents are modeled with triangular patch basis functions. Galerkin's method is applied to numerically solve the coupled mixed-potential integral equation (MPIE). Exact spatial-domain Green's functions are used to account for all radiation, surface-wave, and mutual-coupling effects. Interactions between the stripline feed and the radiating aperture are rigorously included. Numerical analysis is presented for the following nonrectangular shapes: an exponentially tapered slot, an annular slot, an annular slot with opposing stubs, and a monofilar Archimedean spiral slot element. Results are shown for input return loss, radiation patterns, and axial ratio for the circularly polarized elements