Obtaining S–N curves from crack growth curves: an alternative to self-similarity

A crack growth model that allows us to obtain the S–N curves from the crack growth rate curves is presented in an attempt to harmonize the stress based and fracture mechanics approaches in lifetime prediction of long cracks propagation. First, using the Buckingham theorem, the crack growth rate curve $\frac{da}{dN}-\varDelta K$ is defined over all its range as a cumulative distribution function based on a normalized dimensionless stress intensity factor range $\varDelta K^+$ . Then, a relevant theorem is derived that provides an alternative to self-similarity allowing significant reduction of experimental planning. In this way, different $a-N$ crack growth curves for different stress ranges $\varDelta \sigma $ and initial crack lengths $a_0$ can be obtained from a particular crack growth curve under some conditions. The S–N field is obtained from the crack growth curves, showing the close relation between the fracture mechanics and stress approaches. Finally, the model is applied to a particular set of experimental data to obtain the crack growth rate curve and the S–N curves of a certain material for a subsequent fatigue lifetime assessment     

Simulator evaluation of drivers' speed, deceleration and lateral position at rural intersections in relation to different perceptual cues

Aim of the study was to investigate, by means of a driving simulator experiment, drivers’ behaviour in terms of speed, deceleration, and lateral position on major approaches of rural intersections in relation to different perceptual cues.In the experiment, ten different design conditions with and without speed-reducing treatments along the approach to the intersection were tested. Twenty-three drivers drove a test route two times and data from the second drive were used for comparison. The order of the ten design conditions was counterbalanced for all the drivers to minimize the presentation order effect. Three different data analysis techniques were used: (a) cluster analysis of speed and lateral position data, (b) statistical tests of speed and lateral position data, and (c) categorical analysis of deceleration behaviour patterns.The most effective treatments were the dragon teeth markings (based on the principle of optical road narrowing), the colored intersection area (based on the principle of intersection highlighting), and the raised median island (based on the principle of physical road narrowing). These measures, in comparison to the base intersection, produced: (1) a significant speed reduction starting from 250 m before the intersection in the range between 13 and 23 km/h, (2) a significant change in the deceleration behaviour with a reduction in the proportion of drivers which did not decelerate, and (3) a shift away from the intersection of the deceleration beginning. Given the significant effects on drivers’ behaviour, the dragon teeth markings, the colored intersection area, and the raised median island are strongly recommended for real world implementation.     

Effect of uncontrolled factors in a validated liquid chromatography-tandem mass spectrometry method question its use as a reference method for marine toxins: major causes for concern

Chromatographic techniques coupled to mass spectrometry is the method of choice to replace the mouse bioassay (MBA) to detect marine toxins. This paper evaluates the influence of different parameters such as toxin solvents, mass spectrometric detection method, mobile-phase-solvent brands and equipment on okadaic acid (OA), dinophysistoxin-1 (DTX-1), and dinophysistoxin-2 (DTX-2) quantification. In addition, the study compares the results obtained when a toxin is quantified against its own calibration curve and with the calibration curve of the other analogues. The experiments were performed by liquid chromatography (LC) and ultraperformance liquid chromatography (UPLC) with tandem mass spectrometry detection (MS/MS). Three acetonitrile brands and two toxin solvents were employed, and three mass spectrometry detection methods were checked. One method that contains the transitions for azaspiracid-1 (AZA-1), azaspiracid-2 (AZA-2), azaspiracid-3(AZA-3), gimnodimine (GYM), 13-desmethyl spirolide C (SPX-1), pectenotoxin-2 (PTX-2), OA, DTX-1, DTX-2, yessotoxin (YTX), homoYTX, and 45-OH-YTX was compared in both instruments. This method operated in simultaneous positive and negative ionization mode. The other two mass methods operated only in negative ionization mode, one contains transitions to detect DTX-1, OA DTX-2, YTX, homoYTX, and 45-OH-YTX and the other only the transitions for the toxins under study OA, DTX-1, and DTX-2. With dependence on the equipment and mobile phase used, the amount of toxin quantified can be overestimated or underestimated, up to 44% for OA, 46% for DTX-1, and 48% for DTX-2. In addition, when a toxin was quantified using the calibration curve of the other analogues, the toxin amount obtained is different. The maximum variability was obtained when DTX-2 was quantified using either OA or a DTX-1 calibration curve. In this case, the overestimation was up to 88% using the OA calibration curve and up to 204% using the DTX-1 calibration curve. In summary, the correct quantification of DSP toxins by MS detection depends on multiple factors. Since these factors are not taken into account in a validated protocol, these results question the convenience of having MS/MS as a reference method for protecting consumers of marine toxins, moreover if toxicity of each group is considered independently and total toxicity is not summed anymore as it is in the MBA.     

杰昆·索罗拉火车站,巴伦西亚,西班牙

何谓永恒城市与火车之间的爱恨情仇/关系源远流长,有过激情四溢的乐章,也有过痛苦折磨的片断,有过甜蜜美好的瞬间,也有公诸于众的背叛。而今,两者之间的关系历经变化,今非昔比。然而在巴伦西亚的杰昆·索罗拉火车站,城市与火车之间的激情烈焰仍在燃烧。新车站在允许高速火车进行停靠的同时,完成了将铁轨迁入地下的工程:     

A macrokinetic approach to crystallization applied to a new thermoplastic polyimide (New TPI) as a model polymer

The application of a new macrokinetic approach to polymer crystallization is applied in this work to a new thermoplastic polyimide (New TPI) recently developed as a matrix of advanced polymer matrix composites. The slow crystallization kinetics presented by New TPI in the entire range between the glass-transition temperature and the melting point makes TPI an excellent model polymer for testing crystallization models. In the approach presented here the variation of the induction time with the temperature is included in the Nakamura model for nonisothermal crystallization, and a simplified expression of the kinetic constant as a function of the temperature is adopted. The proposed model is verified through a comparison with a complete set of experimental data, ranging from the melting point to the glass-transition temperature of the polymer, obtained in isothermal and nonisothermal conditions. Moreover phase transformation diagrams (TTT and CCT plots) are presented, providing a fundamental tool for understanding the crystallization behavior of semicrystalline matrices and to determine the more appropriate processing conditions. © 1995 John Wiley & Sons, Inc.     

Static analysis of a Bickford beam by means of the DQEM

In this paper the recently proposed differential quadrature element method is employed in order to solve the equilibrium equations of a higher-order beam. A simple five-node element is introduced, in which the vertical displacement is approximated by a sixth-order polynomial, whereas the rotation is consistently approximated by a fourth-order polynomial, and the resulting weighting coefficient matrix is given. Moreover, a general procedure is outlined, for an N-node element, in which vertical displacements and rotations are given by polynomials of order N+1 and N-1, respectively. Numerical examples are aimed both at checking the convergence of the results for increasing values of the nodes, and at comparing the used cubic beam theory with the simpler, linear, Timoshenko theory.     

Role of Bioflocculation on Chemical Oxygen Demand Removal in Solids Contact Chamber of Trickling Filter/Solids Contact Process

The trickling filter/solids contact (TF/SC) process was developed in the late 1970s to improve the quality of the final effluent from existing trickling filter plants, to be able to meet stricter Environmental Protection Agency effluent requirements. Although this process has successfully achieved this objective, it is still not completely understood, there is limited information regarding the flocculation phenomena occurring in the solids contact chamber (SCC), and no information could be found on the relationship between flocculation and organic matter removal kinetics. To better understand the kinetics of biological flocculation in a continuous flow SCC, a long-term experimental program was conducted using a TF/SC pilot plant constructed at the Marrero, La., wastewater treatment plant. This program started in January 1998 and has continued through date. The present article will focus on two major areas: (1) the kinetics of bioflocculation in the SCC; and (2) effect of bioflocculation on chemical oxygen demand (COD) removal. Analysis of the wastewater composition revealed that, on the average, only 18.7% of the total COD in the SCC influent is truly dissolved. Therefore, most of the total COD removal observed in the SCC must be due to a physical process, such as flocculation. The experimental data confirmed that flocculation of the particulate COD contained in the trickling filter effluent explains the high total COD removal observed at the SCC. Both total and colloidal COD removals are well explained by the first-order flocculation model.     

Very Low Voltage MOS Translinear Loops Based on Flipped Voltage Followers

A novel technique for operating MOS Translinear loops at very low supply voltages is described, based on the use of Flipped Voltage Followers for biasing the loops. The resulting topologies, suited to standard CMOS processes, can be successfully applied to a varied repertory of low-voltage analog circuits, such as squarers, multipliers, filters, oscillators, and RMS-DC converters. Measurement results for a geometric-mean and a squarer/divider circuit demonstrate on silicon the usefulness of this technique.     

Flavonoids as stabilizers of fish oil: An alternative to synthetic antioxidants

The antioxidant activities against fish oil oxidation of six commercially available flavonoids and of five flavonoids purified from two Chilean native plants were compared to those ofdl-α-tocopherol and of two synthetic antioxidants, butylated hydroxytoluene and butylated hydroxyanisole. Among the commercial flavonoids, catechin, morin and quercetin showed a higher activity when fish oil oxidation (either spontaneous or Fe²⁺-induced) was assessed from the formation of peroxides or thiobarbituric acid-reactive substances. Among the native flavonoids, the 5,3′,4′-trihydroxy-7-methoxy flavanone (designated as Pt-2) showed the highest antioxidant activity. Mixtures of quercetin or of Pt-2 withdl-α-tocopherol produced better inhibitory effects when compared to that of each substance assayed by itself. Also, when Pt-2 and quercetin were assayed in combination (0.3 g/kg oil and 0.7 g/kg oil, respectively), a synergistic antioxidant effect was observed. Results indicate that several flavonoids could be used as natural antioxidants as a means to replace those synthetic antioxidants, the use of which has been questioned.     

Validation of the rancimat test for the assessment of the relative stability of fish oils

The induction periods for the peroxidation of various fish oils at 55–90°C were studied by the Rancimat test. The natural logarithms of the induction periods varied linearly with respect to temperature, with a mean coefficient of −7.5×10⁻²°C⁻¹, which was significantly different from that reported for vegetable oils. The activation energy for the formation of volatile acids had a mean value of 38.9 kJ/mol and was independent of the fish oil source. Peroxide formation under Rancimat test conditions followed first-order kinetics. The same kinetics were followed under Schaal Oven test conditions (forced-air oven, 60°C). On the basis of the results obtained, the Rancimat test appears to be useful in determining the relative stabilities of fish oils without the change in peroxide decomposition kinetics that may occur at elevated temperatures.