Mobility management architectures based on joint mobile IP and SIP protocols

In the all-IP wireless networks beyond the third generation, mobility management can be effectively achieved by applying mobile IP (MIP) and the session initiation protocol (SIP) jointly. Nevertheless, an efficient combination of both protocols remains an open research issue. Conventional hybrid MIP-SIP mobility architectures operate MIP and SIP almost independently, resulting in significant redundant costs. This article investigates the representative hybrid MIP-SIP architectures and explores the joint optimizations between MIP and SIP for a more cost-efficient mobility support whilst utilizing their complementary power. Two novel design approaches are presented. The first approach culminates in a tightly integrated architecture, which merges the redundant mobility entities in MIP and SIP to yield maximum system efficiency. The other approach leads to a loosely integrated architecture, where necessary interactions are introduced between MIP and SIP mobility servers while their physical entities are kept intact. Major mobility procedures, including location update, session setup and handoff, are discussed in these architectures. The analytical results demonstrate that both proposed architectures outperform typical hybrid MIP-SIP architectures in terms of clear-cut reduced signaling costs     

Sucralfate attenuates gastric mucosal lesions and increased vascular permeability induced by ischaemia and reperfusion in rats

Recent evidence suggests that oxygen-derived free radicals are involved in mediating gastric microvascular and parenchymal cell injuries induced by ischaemia and reperfusion. Therefore, the effect of the locally acting anti-ulcer drug, sucralfate, was studied on ischaemia and reperfusion (e.g. induced gastric lesions, intraluminal bleeding, changes in vascular permeability and non-protein sulfhydryl levels in the rat stomach). Allopurinol was used as a known standard antioxidant drug. Rats were subjected to 30 min of gastric ischaemia in the presence of 100 mmol/L hydrochloric acid and reperfusion periods of 15, 30 or 60 min duration. The gastric lesions were assessed microscopically under an inverted microscope. The vascular permeability was quantified by measuring the extravasated Evans blue in the stomach. There were significantly greater numbers of gastric lesions, intraluminal bleeding and leakage of Evans blue during all reperfusion periods as compared with those of ischaemia, with maximum effects occurring at 60 min following reperfusion. Pretreatment with sucralfate (31.25-250 mg/kg, p.o.) or allopurinol (12.5-50 mg/kg, i.p.) 30 min before the procedure, dose-dependently reduced the gastric lesions, intraluminal bleeding, and decreased the vascular permeability induced by ischaemia and reperfusion. Furthermore, sucralfate dose-dependently reverses the ischaemia and reperfusion-induced depletion of mucosal non-protein sulfhydryl levels and inhibited the superoxide radical production in both cell-free xanthine-xanthine oxidase and in the stimulated polymorphonuclear cellular systems. These results suggest that the protection produced by sucralfate against gastric injury may be due to its antioxidant effects.     

Prevalence of adrenal carcinoma among incidentally discovered adrenal masses. A retrospective study from 1989 to 1994. Gruppo Piemontese Incidentalomi Surrenalici

BACKGROUND: The incidental discovery of an adrenal mass poses the problem of distinguishing between the frequent benign masses and the infrequent malignant ones that require surgery. Univocal guidelines to approach this problem are unavailable. OBJECTIVE: To perform a survey of the clinical management of incidentally discovered adrenal masses (ie, adrenal incidentalomas). DESIGN: A multicentric retrospective analysis of hospital medical records of adrenal incidentalomas diagnosed during a 5-year period; the medical records were scrutinized for demographic data and clinical details by means of a specifically tailored questionnaire. SETTING: The major surgical and medical centers of Piedmont, a northern Italian region with approximately 4 million inhabitants. The recruitment pattern of these centers was unselected. PATIENTS: The definition of adrenal incidentaloma was limited to patients with a physical examination and a clinical history unindicative of adrenal disease. Exclusion criteria also included hypertension of suspected endocrine origin and a history of neoplasms known to metastasize frequently in the adrenal glands. Two hundred twenty-four medical records were collected, and 210 were analyzed (14 excluded a posteriori). RESULTS: Most patients were in their 50s and 60s, and women were predominantly affected. The frequency of adrenocortical cancer was 13% among patients operated on. The tumor diameter was highly correlated with the risk of cancer; a cutoff at 5 cm had a sensitivity of 93% with a specificity of 64% in discriminating between benign and malignant cortical lesions. CONCLUSIONS: The occurrence of adrenocortical carcinoma among adrenal incidentalomas is not rare. The evaluation of the mass size is a simple and effective method for selecting patients at risk for cancer. The indication for surgery of masses larger than 5 cm, or of masses of any diameter that have suspicious imaging characteristics, limits unnecessary operations and costs.     

Kinetic of CO2 absorption and carbamate formation in aqueous solutions of diethanolamine

The absorption rates of CO₂ into aqueous solutions of Diethanolamine (DEA) with varying concentrations from 0.2 to 4M and temperature range from 293 to 323 K were measured by using a laboratory stirred reactor. The CO₂ partial pressure was varied in a range that the reaction would occur in pseudo first order regime. Experimental data were analyzed and the kinetic parameters associated with the reaction were determined. The activation energy for the deprotonation of the intermediate zwitterion was estimated at about 11.4 kcal/mol. The contribution of carbamate formation to the overall absorbed CO₂ was experimentally evaluated and found to be of the order of 100%.     

Passivity‐based sliding mode control for nonlinear systems

Passivity with sliding mode control for a class of nonlinear systems with and without unknown parameters is considered in this paper. In fact, a method for deriving a nonlinear system with external disturbances to a passive system is considered. Then a passive sliding mode control is designed corresponding to a given storage function. The passivity property guarantees the system stability while sliding mode control techniques assures the robustness of the proposed controller. When the system includes unknown parameters, an appropriate updated law is obtained so that the new transformed system is passive. The passivation property of linear systems with sliding mode is also analysed. The linear and nonlinear theories are applied to a simple pendulum model and the gravity‐flow/pipeline system, respectively. Copyright © 2008 John Wiley & Sons, Ltd.     

Comparison of copper emission rates from wood treated with different preservatives to the environment

This study describes a laboratory method for the estimation of emission from preservative-treated wood in the different situations where emissions could enter the environment for use classes 3 (not in contact with ground) and 4 and 5 (in contact with the ground, fresh water or sea water) according to OECD Guidelines. Samples of scotch pine sapwood (Pinus sylvestris L.) were treated with CCA (1% and 2%), ACQ-1900 (3% and 7%), ACQ-2200 (2%), Tanalith E 3491 (2% and 2.8%), and Wolmanit CX-8 (2%).     

A framework to integrate software behavior into dynamic probabilistic risk assessment

Software plays an increasingly important role in modern safety-critical systems. Although, research has been done to integrate software into the classical probabilistic risk assessment (PRA) framework, current PRA practice overwhelmingly neglects the contribution of software to system risk. Dynamic probabilistic risk assessment (DPRA) is considered to be the next generation of PRA techniques. DPRA is a set of methods and techniques in which simulation models that represent the behavior of the elements of a system are exercised in order to identify risks and vulnerabilities of the system. The fact remains, however, that modeling software for use in the DPRA framework is also quite complex and very little has been done to address the question directly and comprehensively. This paper develops a methodology to integrate software contributions in the DPRA environment. The framework includes a software representation, and an approach to incorporate the software representation into the DPRA environment SimPRA. The software representation is based on multi-level objects and the paper also proposes a framework to simulate the multi-level objects in the simulation-based DPRA environment. This is a new methodology to address the state explosion problem in the DPRA environment. This study is the first systematic effort to integrate software risk contributions into DPRA environments.     

An automated coding and classification system with supporting database for effective design of manufacturing systems

The philosophy of group technology (GT) is an important concept in the design of flexible manufacturing systems and manufacturing cells. Group technology is a manufacturing philosophy that identifies similar parts and groups them into families. Beside assigning unique codes to these parts, group technology developers intend to take advantage of part similarities during design and manufacturing processes. GT is not the answer to all manufacturing problems, but it is a good management technique with which to standardize efforts and eliminate duplication. Group technology classifies parts by assigning them to different families based on their similarities in: (1) design attributes (physical shape and size), and/or (2) manufacturing attributes (processing sequence). The manufacturing industry today is process focused; departments and sub units are no longer independent but are interdependent. If the product development process is to be optimized, engineering and manufacturing cannot remain independent any more: they must be coordinated. Each sub-system is a critical component within an integrated manufacturing framework. The coding and classification system is the basis of CAPP and the functioning and reliability of CAPP depends on the robustness of the coding system. The proposed coding system is considered superior to the previously proposed coding systems, in that it has the capability to migrate into multiple manufacturing environments. This article presents the design of a coding and classification system and the supporting database for manufacturing processes based on both design and manufacturing attributes of parts. An interface with the spreadsheet will calculate the machine operation costs for various processes. This menu-driven interactive package is implemented using dBASE-IV. Part Family formation is achieved using a KAMCELL package developed in TURBO Pascal.