A multiple-layer finite-element model of the surface EMG signal

The effect of skin, muscle, fat, and bone tissue on simulated surface electromyographic (EMG) signals was examined using a finite-element model. The amplitude and frequency content of the surface potential were observed to increase when the outer layer of a homogeneous muscle model was replaced with highly resistive skin or fat tissue. The rate at which the surface potential decreased as the fiber was moved deeper within the muscle also increased. Similarly, the rate at which the surface potential decayed around the surface of the model, for a constant fiber depth, increased. When layers of subcutaneous fat of increasing thickness were then added to the model, EMG amplitude, frequency content, and the rate of decay of the surface EMG signal around the limb decreased, due to the increased distance between the electrodes and the active fiber. The influence of bone on the surface potential was observed to vary considerably, depending on its location. When located close to the surface of the volume conductor, the surface EMG signal between the bone and the source and directly over the bone increased, accompanied by a slight decrease on the side of the bone distal to the active fiber. The results emphasize the importance of distinguishing between the effects of material properties and the distance between source and electrode when considering the influence of subcutaneous tissue, and suggest possible distortions in the surface EMG signal in regions where a bone is located close to the skin surface.     

Materials study of silicon-on-lnsulator material by TEM

Silicon-on-insulator (SOI) technology addresses the need for many different device applications, such as radiation tolerant devices, high voltage, and three-dimensional circuitry applications. Isolated silicon epitaxy (ISE) is a commercialised process which results in excellent SOI material quality with proven results, having overcome most of the obstacles of other processes, although only having reduced, not eliminated, threading dislocations. The remaining isolated dislocations have been examined in detail by transmission electron microscopy (TEM). These have been diagnosed as normal lattice dislocations, with no faults or twins in the material. The nature, source, and behavior of the remaining dislocations is discussed.     

先进的企业级性能催化下一代SAS系统

引言当存储器OEM和集成厂商在引进并采用基于SAS的系统时,都会希望能够提供流量管理和安全领域所需的光纤通道及企业级特性。为满足这些需求,在即将推出的SAS 2.0规范中引入了端对端分区的概念。根据定义,SAS协议在指定的域中支持最多16384个设备(启动器、目标器、扩展器和/或虚拟设备),然而,在实际应用中,     

Fabrication of high current and low profile micromachined inductorwith laminated Ni/Fe core

A new process for the fabrication of high current and very low profile micromachined inductors has been developed. This process involves the combination of mechanical lamination and electrodeposition of copper windings by means of LIGA-like lithography through thick epoxy photoresists. The dimension of the fabricated inductor is 16 mm×19 mm×1 mm. The fabricated inductor has an inductance value of 1.2 μH with DC saturation current of 3 A and an electrical resistance of less than 30 mΩ at 10 kHz     

Optimising Channel Assignments for Private Mobile Radio Networks in the UHF 2 Band

Private mobile radio (PMR) services are widely used in business and emergency applications. Typically, these services use the UHF 2 band (450–470 MHz). In order to comply with continental practice, the provision of these services in the UK is to be realigned and a new operational assignment will be generated in 2005. However, this can only be achieved with an appropriate model and the ability to make assignments for large regional networks. The purpose of this paper is to bring our experiences of this problem to the wireless arena. We explain the model used when making assignments for UK PMR networks and identify existing techniques and theory which are appropriate for this problem. We demonstrate that improved assignments and estimates of spectral requirements for large operational services can be found.     

Inkjet Printing of Self‐Assembled 2D Titanium Carbide and Protein Electrodes for Stimuli‐Responsive Electromagnetic Shielding

2D titanium carbides (MXene) possess significant characteristics including high conductivity and electromagnetic interference shielding efficiency (EMI SE) that are important for applications in printed and flexible electronics. However, MXene‐based ink formulations are yet to be demonstrated for proper inkjet printing of MXene patterns. Here, tandem repeat synthetic proteins based on squid ring teeth (SRT) are employed as templates of molecular self‐assembly to engineer MXene inks that can be printed as stimuli‐responsive electrodes on various substrates including cellulose paper, glass, and flexible polyethylene terephthalate (PET). MXene electrodes printed on PET substrates are able to display electrical conductivity values as high as 1080 ± 175 S cm^?1, which significantly exceeds electrical conductivity values of state‐of‐the‐art inkjet‐printed electrodes composed of other 2D materials including graphene (250 S cm^?1) and reduced graphene oxide (340 S cm^?1). Furthermore, this high electrical conductivity is sustained under excessive bending deformation. These flexible electrodes also exhibit effective EMI SE values reaching 50 dB at films with thicknesses of 1.35 µm, which mainly originate from their high electrical conductivity and layered structure.     

A recursive design methodology for VLSI: Theory and example

A novel VLSI (Very Large Scale Integration) methodology based on the hierarchical design of computational and system blocks is presented. The underlying algorithms used are shown to optimise the area-time complexity (AT²) of the computational units and at the system design level. The technique is illustrated for a matrix-matrix multiplication by using an image processing window convolver. This paper describes the performance of the recursive design technique comparing it to a typical systolic array, and demonstrates how data word size and convolution size may be expanded by movement up the architectural hierarchy. A prototype CAD (Computer Aided Design) autolayout program is described which maps directly into the hierarchical design environment. Using such design aids, flexible and correct designs may be generated which offer very simple data flow and highly local interconnection, with high performance.     

An image morphing technique based on optimal mass preserving mapping.

Image morphing, or image interpolation in the time domain, deals with the metamorphosis of one image into another. In this paper, a new class of image morphing algorithms is proposed based on the theory of optimal mass transport. The L(2) mass moving energy functional is modified by adding an intensity penalizing term, in order to reduce the undesired double exposure effect. It is an intensity-based approach and, thus, is parameter free. The optimal warping function is computed using an iterative gradient descent approach. This proposed morphing method is also extended to doubly connected domains using a harmonic parameterization technique, along with finite-element methods.     

Process and temperature compensation in a 7-MHz CMOS clock oscillator

This paper reports on the design and characterization of a process, temperature and supply compensation technique for a 7-MHz clock oscillator in a 0.25-/spl mu/m, two-poly five-metal (2P5M) CMOS process. Measurements made across a temperature range of -40/spl deg/C to 125/spl deg/C and 94 samples collected over four fabrication runs indicate a worst case combined variation of /spl plusmn/2.6% (with process, temperature and supply). No trimming was performed on any of these samples. The oscillation frequencies of 95% of the samples were found to fall within /spl plusmn/0.5% of the mean frequency and the standard deviation was 9.3 kHz. The variation of frequency with power supply was /spl plusmn/0.31% for a supply voltage range of 2.4-2.75 V. The clock generator is based on a three-stage differential ring oscillator. The variation of the frequency of the oscillator with temperature and process has been discussed and an adaptive biasing scheme incorporating a unique combination of a process corner sensing scheme and a temperature compensating network is developed. The biasing circuit changes the control voltage of the differential ring oscillator to maintain a constant frequency. A comparator included at the output stage ensures rail-to-rail swing. The oscillator is intended to serve as a start-up clock for micro-controller applications.