Primary Level Hydrophone Calibration System Based on PC Oscilloscope

Primary level “hydrophone calibration system” for calibrating hydrophones in the frequency range from a few to hundreds kilohertz under free-field conditions is presented. “Open architecture system” has been developed on the basis of conventional laboratory equipment, namely, signal generator, power amplifier, and digital PC-oscilloscope. Concept of design, measurement flowchart and results of validation with uncertainty budget of measurements are presented. The system covers wide frequency range of underwater applications and also presents low-cost solution enabling to reach sufficient level required for primary calibration according to standards.     

Evaluating the efficiency of local municipalities in providing traffic safety using the Data Envelopment Analysis

The purpose of this study was to estimate the relative efficiency of 197 local municipalities in traffic safety in Israel during 2004–2009, using Data Envelopment Analysis (DEA). DEA efficiency is based on multiple inputs and multiple outputs, when their weights are unknown. We used here inputs reflecting the resources allocated to the local municipalities (such as funding), outputs include measures that reflect reductions in accidents (such as accidents per population), and intermediate variables known as safety performance indicators (SPI): measures that are theoretically linked to crash and injury reductions (such as use of safety belts). Some of the outputs are undesirable. Using DEA, the local municipalities were rank-scaled from the most efficient to the least efficient and required improvements for inefficient municipalities were calculated. We found that most of the improvements were required in two intermediate variables related to citations for traffic violations. Several DEA versions were used including a two-stage model where in the first stage the intermediate variables are the outputs, and in the second stage they are the inputs. Further analyses utilizing multiple regressions were performed to verify the effect of various demographic parameters on the efficiency of the municipalities. The demographic parameters tested for each local municipality were related to the size, age, and socio-economic level of the population. The most significant environmental variable affecting the efficiency of local municipalities in preventing road accidents is the population size of the local authority; the size has a negative effect on the efficiency. As far as we could determine, this is the first time that the DEA is used to measure the efficiency of local municipalities in improving traffic safety.     

Characteristics of CFRP retrofitted hollow brick infill walls of reinforced concrete frames

The mechanical characteristics of infill walls retrofitted with carbon fiber reinforced polymer (CFRP) sheets are really important for the realistic prediction of seismic performance of the vulnerable reinforced concrete (RC) frames retrofitted through CFRP strengthened infill walls. In this study, 36 hollow brick wall specimens were tested either under uniaxial compression or diagonal tension before and after retrofitting externally with CFRP sheets. The test parameters are the dimensions of the walls, the orientation of holes of bricks, the type of mortar, the amount of CFRP sheets and the details of strengthening application. At the end of the tests, a significant contribution of CFRP sheets on the mechanical characteristics of hollow brick walls was observed in terms of several important structural design parameters such as Young and shears moduli, axial and shears strengths as well as the deformation capacity. Finally, the strength and deformability characteristics of the walls and frames retrofitted with CFRP sheets were predicted analytically. The predictions were in good agreement with the experimental data.     

Use of Salt Baths in the Temperature Range from 175?��C to 540?��C with Uncertainties of Less than 30?m��C

Calibration of thermometers in the temperature range from ?80 °C to 550 °C requires liquid baths; alcohol, water, silicon oil, salt baths and dry block furnaces. In this study, the use of salt baths outside of their usual range of 250 °C to 540 °C for calibrating thermometers in the range between 175 °C and 250 °C is proposed. The calibration range from 150 °C to 250 °C is usually covered by an oil bath, but utilizing a salt bath saves calibration time and resources, improves stability and homogeneity, allows longer term usage of the liquid, and reduces hazardous chemical vapors evaporated at temperatures above 175 °C. This proposal is based on a study of the uncertainty contributions at varying salt bath temperatures in the range from 175 °C to 540 °C which was carried out in this study. Results achieved and analyzed in this study indicate that the implementation of salt baths in this lower temperature range provides opportunities to calibrate reference and/or working thermometers with an uncertainty below 30 m°C, almost the same as the oil-bath uncertainty in the range of 175 °C to 250 °C. The main components of uncertainty contributed by a salt bath over this temperature range are discussed in this study.     

Compressibility of carbon woven fabrics with carbon nanotubes/nanofibres grown on the fibres

Growth of carbon nanotubes (CNT) or carbon nano-fibres (CNF) on carbon fibrous substrates is a way to increase the fracture toughness of fibre reinforced composites (FRC), with encouraging results reported in the recent years. If these nano-engineered FRC (nFRC) are destined to leave laboratories and enter industrial-scale production, a question of adapting the existing composite manufacturing methods will arise. The paper studies compressibility of woven carbon fibre performs (two types of fabrics) with CNT/CNF grown on the fibres using the CVD method. The results include pressure vs thickness and pressure vs fibre volume fraction diagrams for one and four layers of the fabric. Morphology of the nFRC is studied with SEM. It is shown that the pressure needed to achieve the target fibre volume fraction of the preform increases drastically (for example, from 0.05 MPa to more than 0.5 MPa for a fibre volume fraction of 52%) when CNT/CNF are grown on it. No change in nesting of the fabric plies is noticed. The poor compressibility can lower the achievable fibre volume fraction in composite for economical vacuum assisted light-RTM techniques and increase the pressure requirements in autoclave processing.     

Measurement invariance of the Gifted Rating Scales—School Form across five cultural groups.

This study examined measurement invariance of the Gifted Rating Scales—School Form (GRS–S) across the United States, Puerto Rico, China, South Korea, and Turkey, using multigroup confirmatory factor analysis. A total of 1,817 students were rated by 287 teachers using either translated versions of GRS–S or the original English GRS–S. Results indicate a similar factor structure for the GRS–S across the five locations; six factors with each of the 72 items equivalently loaded to the same latent variable across groups. The metric invariance test and the factor variance and covariance invariance tests reveal that the patterns of factor loadings and the factor variances and covariances are invariant across the five groups. Moreover, the scalar invariance test indicates that item means are equivalent across the groups. These results suggest that the GRS–S has intercultural utility and can be similarly interpreted. Implications and limitations of the present research for gifted identification are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of current density on the corrosion protection performance of polyaniline coated AISI 4140 steel

The present work reports on electropolymerisation of aniline onto AISI 4140 steel substrate at room temperature in oxalic acid media by the potentiodynamic electrodeposition method. The effect of coating current density on the morphology of conductive polymer films and their corrosion behaviour has been investigated. The electrolyte solution comprised 0.1 M aniline?+?0.3 M oxalic acid. The effects of deposition current density changes (0.1, 0.2, 0.3, 0.4 and 0.5?mA cm^?2) on the films were investigated. The PANI film was characterised using cyclic voltammetry and optical microscopy; it was covered with a dark green-yellow homopolymer film of strongly adherent homogeneous characteristic. The corrosion behaviour of steel electrodes with and without polyaniline (PANI) film in 3.5 wt-% NaCl solution was investigated through anodic polarisation curves. The results indicated that the PANI coating obtained under 0.2?mA cm^?2 was the most corrosion protective.     

Tribological Behavior of TiAlN,AlTiN, and AlCrN Coatings at Boundary Lubricating Condition

In this study, ~?3.5 µm thick multilayer titanium alumina nitride (TiAlN), alumina titanium nitride (AlTiN), and alumina chromium nitride (AlCrN) coatings were deposited on the H13 steel surface by cathodic arc physical vapor deposition (CAPVD) method. The tribological performance of the coatings was evaluated by a tribometer at boundary lubrication condition. Then, coating surfaces were observed by optical microscope, optical profilometer, and atomic force microscope to evaluate the morphological changes, wear volumes, and tribofilm thickness. Also, scanning electron microscopy (energy dispersive X-ray) and X-ray photoelectron spectrometry analyses were applied to coating surfaces for the tribochemical evolution of the tribofilm. Results showed that AlCrN coating performed the best tribological behavior at boundary lubricated condition, when compared to TiAlN and AlTiN coatings and it can be used as a wear resistant cam tappet coating in internal combustion engines.     

Effect of various additives to marinating baths on some properties of cattle meat

Longissimus dorsi (LD) muscles obtained from young bull carcasses (Holstein Friesian) were marinated, using solutions containing 0.5% sodium tripolyphosphate (STP), 0.5% dicalciumhydrogen phosphate (CHP) and 0.5% citric acid (CA). All solutions, including a blank, contained 2% NaCl. Expressible moisture, cooking loss, marinade uptake, area gain (increase in slice size), colour coordinate values (L*, a*, b*), marinade and meat pH, and the textural properties of samples were evaluated. Marinating with STP and CHP solutions resulted lower cooking losses. Marinade uptake and area gain were lower for control steaks and steaks marinated with the CA solution. The highest lightness was found in steaks marinated with the CA solution. Steaks marinated with STP and CHP solutions were darker. The CA solution resulted in yellowness of steaks. All treatments significantly affected hardness, chewiness and resilience values of steaks. The lowest hardness value was found in steaks marinated with CA. STP and CHP treatments also improved tenderness.     

Sustainable hydrogen production options from food wastes

In this study, two thermochemical processes, namely steam gasification and supercritical water gasification (SCWG), were comparatively studied to produce hydrogen from food wastes containing about 90% water. The SCWG experiments were performed at 400 and 450 °C in presence of catalyst (Trona, K₂CO₃ and seaweed ash). The maximum hydrogen yield was obtained at 450 °C in presence of K₂CO₃ catalyst. In second process, hydrothermal carbonization was used to convert food wastes into a high-quality solid fuel (hydrochar) that was further gasified in a dual-bed reactor in presence of steam. The steam gasification of hydrochar was carried out with and without catalysts (iron?ceria catalyst and dolomite). The maximum hydrogen yield obtained from steam gasification process was 28.08 mmol/g dry waste, about 7.7 times of that from SCWG. This study proposed a new concept for hydrogen production from wet biomass, combination of hydrothermal carbonization following steam gasification.