Thermal energy storage by poly(styrene-co-p-stearoylstyrene) copolymers produced by the modification of polystyrene

A series of poly(styrene-co-p-stearoyl styrene) copolymers as novel polymeric solid–solid phase-change materials (SSPCMs) were synthesized by the modification of polystyrene with stearoyl chloride. The chemical structure and crystalline morphology of the synthesized copolymers were determined with Fourier transform infrared spectroscopy and polarized optical microscopy, respectively. The thermal energy storage properties and thermal stability of the SSPCMs were investigated with differential scanning calorimetry and thermogravimetric analysis, respectively. In addition, the thermal conductivity of the SSPCMs was measured with a thermal property analyzer. Moreover, thermal cycling tests showed that the copolymers had good thermal reliability and chemical stability after being subjected to 5000 heating/cooling cycles. The synthesized poly(styrene-co-stearoyl styrene) copolymers as novel SSPCMs have considerable potential for thermal energy storage and temperature-control applications. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Carbonium Ion and Hydridocobalt Intermediates in the Acidic Phase Transfer Catalyzed Reactions of Olefins and Dienes with Cobalt Carbonyl

The intermediates mentioned in the title are probably involved in the hydrogenation of olefins and dienes; bidentate phosphine and arsine cobalt complexes are useful reagents for these reactions.     

Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar

The development of new binders, as an alternative to traditional cement, by the alkaline activation of industrial by-products (i.e. ground granulated slag and fly ash) is an ongoing research topic in the scientific community [Puertas F, Amat T, Jimenez AF, Vazquez T. Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres. Cem Concr Res 2003;33(12): 2031–6]. The aim of this study was to investigate the feasibility of using and alkaline activated ground Turkish slag to produce a mortar without Portland cement (PC).Following the characterization of the slag, mortar specimens made with alkali-activated slag were prepared. Three different activators were used: liquid sodium silicate (LSS), sodium hydroxide (SH) and sodium carbonate (SC) at different sodium concentrations. Compressive and flexural tensile strength of alkali-activated slag mortar was measured at 7-days, 28-days and 3-months. Drying shrinkage of the mortar was measured up to 6-months. Setting times of the alkali-activated slag paste and PC paste were also measured.Setting times of LSS and SH activated slag pastes were found to be much slower than the setting time of PC paste. However, slag paste activated with SC showed similar setting properties to PC paste.LSS, SH and SC activated slag mortar developed 81, 29, and 36 MPa maximum compressive strengths, and 6.8, 3.8, and 5.3 MPa maximum flexural tensile strengths at 28-days. PC mortar developed 33 MPa compressive strength and 5.2 MPa flexural tensile strength. LSS and SH activated slag mortars were found to be more brittle than SC activated slag and PC mortars.Slag mortar made with LSS had a high drying shrinkage, up to six times that of PC mortar. Similarly, slag mortar made with SH had a shrinkage up to three times that of PC mortar. However, SC activated slag mortar had a lower or comparable shrinkage to PC mortar. Therefore, the use of SC as an activator for slag mortar is recommended, since it results in adequate strength, similar setting times to PC mortar and comparable or lower shrinkage.     

Anode effect elimination by subsonic and sonic vibrations

The only method so far used industrially to produce primary aluminum is the combination of the Bayer process with the Hall-Héroult process. The production process of aluminum which was patented by Charles Martin Hall and Paul Louis Toussaint Héroult in 1886, has long been important in our daily lives and that importance is likely to increase year by year. In this study, different subsonic and sonic vibrations, which were obtained from a 0.30 kW, 1,400 rpm three-phase motor, also a 0.55 kW, 2,800 rpm three-phase motor and 0.75 kW frequency converter, were applied to a laboratory-type aluminum electrolysis cell and the possibility of eliminating the anode effect was investigated.     

Objective and subjective socioeconomic status and susceptibility to the common cold.

Objective: We ask whether subjective socioeconomic status (SES) predicts who develops a common cold when exposed to a cold virus. Design: 193 healthy men and women ages 21-55 years were assessed for subjective (perceived rank) and objective SES, cognitive, affective and social dispositions, and health practices. Subsequently, they were exposed by nasal drops to a rhinovirus or influenza virus and monitored in quarantine for objective signs of illness and self-reported symptoms. Main Outcome Measures: Infection, signs and symptoms of the common cold, and clinical illness (infection and significant objective signs of illness). Results: Increased subjective SES was associated with decreased risk for developing a cold for both viruses. This association was independent of objective SES and of cognitive, affective and social disposition that might provide alternative spurious (third factor) explanations for the association. Poorer sleep among those with lesser subjective SES may partly mediate the association between subjective SES and colds. Conclusions: Increased Subjective SES is associated with less susceptibility to upper respiratory infection, and this association is independent of objective SES, suggesting the importance of perceived relative rank to health. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Optimum length of tubes for heat transfer in turbulent flow at constant wall temperature

Maximum heat transfer per cross-sectional area of a tube with smooth wall in turbulent flow at constant wall temperature is determined for a given pressure loss. The dimensionless tube length is determined dependent on the pressure Reynolds number, Prandtl number and inlet local pressure loss coefficient. Limiting cases for short and long tubes are separately investigated. Semi-empirical equations are derived for both optimum dimensionless tube length and dimensionless maximum heat flow per cross-sectional area using numerically obtained values with a maximum deviation of ±6.6% and with a RMSE of 3.5%. The results can also be applied to the channels with non-circular cross-sectional area.     

A site-isolated mononuclear iridium complex catalyst supported on MgO: Characterization by spectroscopy and aberration-corrected scanning transmission electron microscopy

Supported mononuclear iridium complexes with ethene ligands were prepared by the reaction of Ir(C₂H₄)₂(acac) (acac is CH₃COCHCOCH₃) with highly dehydroxylated MgO. Characterization of the supported species by extended X-ray absorption fine structure (EXAFS) and infrared (IR) spectroscopies showed that the resultant supported organometallic species were Ir(C₂H₄)₂, formed by the dissociation of the acac ligand from Ir(C₂H₄)₂(acac) and bonding of the Ir(C₂H₄)₂ species to the MgO surface. Direct evidence of the site-isolation of these mononuclear complexes was obtained by aberration-corrected scanning transmission electron microscopy (STEM); the images demonstrate the presence of the iridium complexes in the absence of any clusters. When the iridium complexes were probed with CO, the resulting IR spectra demonstrated the formation of Ir(CO)₂ complexes on the MgO surface. The breadth of the ν_CO bands demonstrates a substantial variation in the metal–support bonding, consistent with the heterogeneity of the MgO surface; the STEM images are not sufficient to characterize this heterogeneity. The supported iridium complexes catalyzed ethene hydrogenation at room temperature and atmospheric pressure in a flow reactor, and EXAFS spectra indicated that the mononuclear iridium species remained intact. STEM images of the used catalyst confirmed that almost all of the iridium complexes remained intact, but this method was sensitive enough to detect a small degree of aggregation of the iridium on the support.     

A simulated annealing algorithm based approach for balancing and sequencing of mixed-model U-lines

It is known that two interrelated problems called as line balancing and model sequencing should be solved simultaneously for an efficient implementation of a mixed-model U-shape assembly line in a JIT (Just in Time) environment. On the other hand, three versions of assembly line balancing problem can be identified: Type I, Type II, and Type E. There are only two articles ( Kara, Ozcan, & Peker, 2007a and Hamzadayi & Yildiz, 2012) related to simultaneous balancing and sequencing of mixed-model U-lines for minimizing the number of stations (Type 1 problem) by ignoring the fixed model sequence in the current literature. In this paper, a simulated annealing algorithm is proposed for solving a problem of type 1 by ignoring the fixed model sequence. Accordingly, simulated annealing based fitness evaluation approach proposed by Hamzadayi and Yildiz (2012) is enhanced by adding the tabu list, and inserted into the proposed algorithm. Implementation difficulties experienced in meta-heuristics based on solution modification for solving these types of problems are demonstrated. ‘Absolute deviation of workloads’ (ADW) is quite frequently used as performance criteria in the literature. It is found that ADW is an insufficient performance criterion for evaluating the performance of the solutions, and this is showed by means of an illustrative example. The parameters of the proposed algorithm are reviewed for calibrating the algorithm by means of Taguchi design of experiments. Performance of the proposed approach is tested through a set of test problems. The results of computational experiments indicate that the proposed approach is an effective method in solving simultaneous line balancing/model sequencing problems for mixed-model U-lines for minimizing the number of stations.     

Coal consumption and industrial production nexus in USA: Cointegration with two unknown structural breaks and causality approaches

The paper investigates the causality relationships among industrial production index, coal consumption and employment in industrial sector for the period of 1973:1–2011:10 in USA. After noticing that there are breaks in the regression model, the Hatemi-J test for cointegration is employed to the cases that take into account two possible regime shifts. It is concluded that there is a long run relationship between industrial production and industrial coal consumption with the breaks at 1983:4 and 1998:4. We found a negative relationship between coal consumption and industrial production for the period of 1973:1–1983:4 and positive relationship for 1983:5–1998:4 period. For the last period that covers 1983:5–2011:10, the cointegration relationship turned to negative. In addition, the results show that causal relationship between coal consumption and industrial production changes over time.