Latent heat energy storage characteristics of building composites of bentonite clay and pumice sand with different organic PCMs

In the present work, six new kinds of building composite PCMs (BCPCMs), PS/octadecane, BC/octadecane, PS/CA–MA, BC/CA–MA, PS/PEG1000, and BC/PEG1000 composites, were prepared by using vacuum impregnation method. The maximum percent of PCM in the composites was assigned to be 12, 13, 18, 23, 30, and 42 wt%, respectively. The form‐stable BCPCMs were characterized using SEM, FT‐IR, DSC, and TG analysis techniques. The characterization results showed the existence of homogenous dispersion of the PCM into the PBM matrixes. The DSC measurements indicated that the melting temperatures of the form‐stable BCPCMs are in the range of 20–33°C while they have latent heats of melting in the range of about 28–55 J/g. These results make them promising BCPCMs for low temperature‐passive TES applications in buildings. Thermal cycling test indicated that the prepared BCPCMs have good thermal reliability and chemical stability. TG analysis proved that the prepared BCPCMs have good thermal durability. In addition, the thermal conductivity of BCPCMs was enhanced considerably by addition of expanded graphite (EG). The improvement in thermal conductivity of the BCPCMs caused appreciably reduction in their melting times. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of various additives to marinating baths on some properties of cattle meat

Longissimus dorsi (LD) muscles obtained from young bull carcasses (Holstein Friesian) were marinated, using solutions containing 0.5% sodium tripolyphosphate (STP), 0.5% dicalciumhydrogen phosphate (CHP) and 0.5% citric acid (CA). All solutions, including a blank, contained 2% NaCl. Expressible moisture, cooking loss, marinade uptake, area gain (increase in slice size), colour coordinate values (L*, a*, b*), marinade and meat pH, and the textural properties of samples were evaluated. Marinating with STP and CHP solutions resulted lower cooking losses. Marinade uptake and area gain were lower for control steaks and steaks marinated with the CA solution. The highest lightness was found in steaks marinated with the CA solution. Steaks marinated with STP and CHP solutions were darker. The CA solution resulted in yellowness of steaks. All treatments significantly affected hardness, chewiness and resilience values of steaks. The lowest hardness value was found in steaks marinated with CA. STP and CHP treatments also improved tenderness.     

Textural fabric defect detection using statistical texture transformations and gradient search

The inspection of the fabric defects is an important problem, which highly affects both the quality and the cost in the textile industry. Because of consistency and accuracy problems, the inspection of the fabric defect by human experts is neither feasible nor efficient. This requires development and use of automated inspection techniques. Thus, in this study, a texture analysis method, which uses sum and difference histograms (SDH) conjointly with co-occurrence matrices, is proposed to introduce an objective criterion for defect detection. To accomplish the detection task with high accuracy, several features were extracted from SDH and then, a defect search technique, which was developed in the context of this study, was applied. Moreover, several experiments and parameter analysis were performed to carry out detection at feasible computation time and memory storage. The developed method was applied to 28 kinds of raw woven fabric defects and 27 of them (i.e. 93.1%) were successfully recognized by the proposed detection system. The quantitative results and qualitative discussions show the effectiveness of the developed strategy.     

Utilizing Accessible Heat Enhancing Cooling Effect with Three Bed Solar Adsorption Chiller

ABSTRACT

Conventional solar heat-driven single stage two bed chillers demand a large area for installation of solar thermal collector to activate the chiller, but in a highly populated tropical country open spaces is insufficient. In the intention to utilize accessible solar energy with better performance, a mathematical investigation is carried out with a three bed adsorption cooling unit working with silica gel-water pair. The studied chiller is powered by direct solar heat collected by a series of compound parabolic concentrator solar thermal collectors without any heat or mass recovery. The working principal of the chiller is, in principle, the same as the conventional two-bed adsorption chiller. However, instead of two half cycles, there are three one third cycles in the proposed chiller in which at every cycle the former desorber is kept in the precooling mode and as an adsorber for the next two one third cycles, respectively. As desorption kinetic is faster than the adsorption kinetics, this longer precooling mode helps the silica gel granules to adsorb more water molecules and increase evaporation rate. Hence, a better cooling effect of at least 1°C can be observed, increases chiller working hour after sunset for almost a further one hour.     

On establishing the genetic basis of mental disease

Many of the recent studies reporting genetic linkages for mental illnesses such as schizophrenia and manic depression have been retracted. The authors of this article argue that the fundamental reason for the difficulties in this research field lies in the strongly held preconceived belief that the primary cause of these illnesses is in fact genetic. All scientists hold preconceived ideas. However, such ideas are more likely to result in erroneous conclusions in the study of human behavior than in other more 'objective' research areas. Moreover, it is especially important that researchers studying human behavior be aware of their biases and learn to compensate for them because of the social consequences of their work.     

Performance of an RTL contactor for gas-liquid systems: Effective interfacial area and volumetric mass transfer coefficient by oxidation of sodium sulphite solution

Effective interfacial area a and volumetric liquid-side mass transfer coefficient k_La of an RTL contactor were obtained at different stirring speeds by absorption of oxygen from air into 0.8 kmol/m³ sodium sulphite solution, in the presence of Co⁺⁺ ions. The values of a and k_La ranged from 80 to 150 m²/m³ and 0.0003 to 0.00053 s^?1, respectively, when stirrer speed was increased from 8 to 40 rpm. When k_L alone was evaluated, it was found to be practically constant, irrespective of stirring speed.     

Modeling of thermodynamics of substituted toluene derivatives and benzylic radicals via group additivity

The thermodynamic properties of unsubstituted, mono‐, and di‐substituted toluene derivatives and benzylic radicals with hydroxy, methoxy, formyl, vinyl, methyl, and ethyl substituents are calculated with the bond additivity corrected (BAC) post‐Hartree‐Fock CBS‐QB3 method. Benson's group additivity (GA) scheme is extended to toluene derivatives by determining six group additive value (GAV) and five non‐nearest neighbor interaction (NNI) parameters through least‐squares regression to a database of thermodynamic properties of 168 compounds and to benzylic radicals by defining 6 GAV and 14 NNI parameters based on a set of 168 radicals. Comparison between CBS‐QB3/BAC and GA‐calculated thermodynamic values shows that the standard enthalpies of formation generally agree within 4 kJ mol^?1, whereas the entropies and the heat capacities generally deviate <4 J mol^?1 K^?1. © 2018 American Institute of Chemical Engineers AIChE J, 64: 3649–3661, 2018     

Comparison of hemispheric asymmetry measurements for emotional recordings from controls

Four asymmetry measurements (conventional coherence function (CCF), cross wavelet correlation (CWC), phase lag index (PLI), and mean phase coherence (MPC)) have been compared to each other for the first time in order to recognize emotional states (pleasant (P), neutral (N), unpleasant (UP)) from controls in EEG sub-bands (delta (0–4 Hz), theta (4–8 Hz), alpha (8–16 Hz), beta (16–32 Hz), gamma (32–64 Hz)) mediated by affective pictures from the International Affective Picture Archiving System (IAPS). Eight emotional features, computed as hemispheric asymmetry between eight electrode pairs (Fp1 − Fp2, F7 − F8, F3 − F4, C3 − C4, T7 − T8, P7 − P8, P3 − P4, and O1 − O2), have been classified by using data mining methods. Results show that inter-hemispheric emotional functions are mostly mediated by gamma. The best classification is provided by a neural network classifier, while the best features are provided by CWC in time-scale domain due to non-stationary nature of electroencephalographic (EEG) series. The highest asymmetry levels are provided by pleasant pictures at mostly anterio-frontal (F3 − F4) and central (C3 − C4) electrode pairs in gamma. Inter-hemispheric asymmetry levels are changed by each emotional state at all lobes. In conclusion, we can state the followings: (1) Nonlinear and wavelet transform-based methods are more suitable for characterization of EEG; (2) The highest difference in hemispheric asymmetry was observed among emotional states in gamma; (3) Cortical emotional functions are not region-specific, since all lobes are effected by emotional stimuli at different levels; and (4) Pleasant stimuli can strongly mediate the brain in comparison to unpleasant and neutral stimuli.

     

Simulation platform for anticipative plant-level maintenance decision support system

Global competition and increasing customer expectations are forcing automobile manufacturers to improve their operations. Maintenance, being one of the most critical components in many industries, has a direct impact on the improvement of the overall production performance. In this paper, we introduce an anticipative plant-level maintenance decision support system (APMDSS) that provides guidance on corrective and preventive maintenance priorities based on the equipment bottleneck ranks with the objective of improving daily plant throughput. APMDSS anticipates the plant dynamics (i.e. bottlenecks, hourly buffer levels and likelihood of machine breakdowns) for upcoming shifts using starting state information of the production shift (e.g. equipment maintenance history, operational status of machines, buffer levels and scheduled production model mix). We also evaluate the performance of APMDSS using real data from an automotive body shop experiencing routine throughput difficulties due to frequent machine breakdowns. The results are compared with other methods from the literature and found to be superior in many settings.     

Kernel-based object tracking using asymmetric kernels with adaptive scale and orientation selection

Kernel-based object tracking refers to computing the translation of an isotropic object kernel from one video frame to the next. The kernel is commonly chosen as a primitive geometric shape and its translation is computed by maximizing the likelihood between the current and past object observations. In the case when the object does not have an isotropic shape, kernel includes non-object regions which biases the motion estimation and results in loss of the tracked object. In this paper, we propose to use an asymmetric object kernel for improving the tracking performance. An important advantage of an asymmetric kernel over an isotropic kernel is its precise representation of the object shape. This property enhances tracking performance due to discarding the non-object regions. The second contribution of our paper is the introduction of a new adaptive kernel scale and orientation selection method which is currently achieved by greedy algorithms. In our approach, the scale and orientation are introduced as additional dimensions to the spatial image coordinates, in which the mode seeking, hence tracking, is achieved simultaneously in all coordinates. Demonstrated in a set of experiments, the proposed method has better tracking performance with comparable execution time then kernel tracking methods used in practice.