Preparation and characterization of sulfonated block‐graft copolyimide/sulfonated polybenzimidazole blend membranes for fuel cell application

Polymer electrolyte blend membranes composed of sulfonated block‐graft polyimide (S‐bg‐PI) and sulfonated polybenzimidazole (sPBI) were prepared and characterized. The proton conductivity and oxygen permeability coefficient of the novel blend membrane S‐bg‐PI/sPBI (7 wt%) were 0.38 S cm^?1 at 90 °C and 98% relative humidity and 7.2 × 10^?13 cm³(STP) cm (cm² s cmHg)^?1 at 35 °C and 76 cmHg, respectively, while those of Nafion^® were 0.15 S cm^?1 and 1.1 × 10^?10 cm³(STP) cm (cm² s cmHg)^?1 under the same conditions. The apparent (proton/oxygen transport) selectivity calculated from the proton conductivity and the oxygen permeability coefficient in the S‐bg‐PI/sPBI (7 wt%) membrane was 300 times larger than that determined in the Nafion membrane. Besides, the excellent gas barrier properties based on an acid ? base interaction in the blend membranes are expected to suppress the generation of hydrogen peroxide and reactive oxygen species, which will degrade fuel cells during operation. The excellent proton conductivity and gas barrier properties of the novel membranes promise their application for future fuel cell membranes. © 2015 Society of Chemical Industry     

H- beam extraction from a cesium seeded field effect transistor based radio frequency negative hydrogen ion source

H(-) beam was successfully extracted from a cesium seeded ion source operated using a field effect transistor inverter power supply as a radio frequency (RF) wave source. High density hydrogen plasma more than 10(19) m(-3) was obtained using an external type antenna with RF frequency of lower than 0.5 MHz. The source was isolated by an isolation transformer and H(-) ion beam was extracted from a single aperture. Acceleration current and extraction current increased with the increase of extraction voltage. Addition of a small amount of cesium vapor into the source enhanced the currents.     

Peak assignments of ELNES and XANES using overlap population diagrams

The usefulness of overlap population (OP) diagrams for peak assignments of an electron energy loss near-edge structure (ELNES) and an X-ray absorption near-edge structure (XANES) is demonstrated. Mg-K, L(2,3), and O-K edges of MgO are taken as examples. Theoretical calculations are performed using a first-principles orthogonalized linear combination of atomic orbitals (OLCAO) method. A core-hole is included explicitly, and a large supercell is used to minimize artificial interactions among the core-holes in adjacent cells. All experimental spectra are quantitatively reproduced by the calculations. The OP diagrams for a selected pair of atomic orbitals are computed in order to provide proper assignments for each peak in ELNES and XANES. They are interpreted in terms of interactions among Mg-Mg and Mg-O bonds. Results are found to be consistent to our previous conclusion, which was obtained using a cluster method [T. Mizoguchi, et al., Phys. Rev. B 61 (2000) 2180]. The powerful combination of the OP diagram and a high-energy resolution ELNES to obtain fine electronic structures is also demonstrated.     

A new large radius imaging plate camera for high-resolution and high-throughput synchrotron x-ray powder diffraction by multiexposure method

A new large radius imaging plate diffraction camera for high-resolution and high-throughput synchrotron x-ray powder diffraction by means of multiple exposures has been developed for an insertion device beamline of SPring-8, Japan. The new imaging plate camera consists of a large radius cylindrical shape imaging plate cassette that is 400 mm in length and 954.9 mm in cylinder radius. The cassette is designed to be mounted on the 2 theta arm of the diffractometer of BL15XU in SPring-8. One imaging plate covers 24 degrees and several times of exposure changing the 2 theta-setting angle is necessary to obtain whole powder diffraction data up to a high angle region. One pixel of the imaging plate corresponds to 0.003 degrees in 2 theta when the readout pixel size is 50 microm squares. Separately collected data are translated to 2 theta-intensity format and are connected by comparing the peak and background intensity included in the overlapped area. The exposure time is less than 120 s for most samples and the readout time is about 3 min; thus, the total measurement time for one powder diffraction pattern is less than 20 min. The measurement time is the same order as the continuous 2 theta-scanning method of the third generation synchrotron powder diffractometer. The angular resolution of the new imaging plate camera was evaluated by comparing the full width at half maximum of the 111 reflection of NBS-Si. The observed angular resolution is not so high as a powder diffractometer with a Si or a Ge analyzer monochromator in the third generation synchrotron facility but higher than a powder diffractometer with a Ge analyzer monochromator at a bending magnet beamline of the second generation synchrotron. The Rietveld analysis of NBS-CeO2 was successfully carried out with the data taken by the new imaging plate camera.     

Measurements of Two-Dimensional Distribution of Refrigerant Concentration in EHL Film Using Micro FT-IR and Effect of Variation of Concentration on Oil Film Thickness

The dissolution of refrigerant into a lubricant causes a decrease in viscosity of the oil and it gives a large effect on the lubrication of sliding parts in a refrigerant compressor. This paper describes an application of micro FT-IR to measure the two-dimensional concentration distribution of refrigerant held in solution in the EHL film surrounded by the refrigerant gas and discusses the refrigerant concentration variation in the vicinity of the Hertzian contact area. In order to measure the concentration distribution, an apparatus which can observe the EHL film in a point contact in the refrigerant atmosphere was developed. The refrigerant concentration was measured using micro FT-IR through a CaF₂ window from outside of the apparatus with polyol ester as a base oil in an atmosphere pressurized with HFC-134a refrigerant gas. The results indicate that the concentration of HFC-134a refrigerant reduces in the inlet boost region of EHL contact and the Hertzian contact area but in the side region of Hertzian contact area it is greater than that in the bulk fluid. In addition, the effect of the variation on the oil film thickness is discussed.     

Prediction of cutting forces and machining error in ball end milling of curved surfaces -II experimental verification

This paper presents the results of a series of experiments performed to examine the validity of a theoretical model for evaluation of cutting forces and machining error in ball end milling of curved surfaces. The experiments are carried out at various cutting conditions, for both contouring and ramping of convex and concave surfaces. A high precision machining center is used in the cutting tests. In contouring, the machining error is measured with an electric micrometer, while in ramping it is measured on a 3-coordinate measuring machine. The results show that in contouring, the cutting force component that influences the machining error decreases with an increase in milling position angle, while in ramping, the two force components that influence the machining error are hardly affected by the milling position angle. Moreover, in contouring, high machining accuracy is achieved in “Up cross-feed, Up cut” and “Down cross-feed, Down cut” modes, while in ramping, high machining accuracy is achieved in “Left cross-feed, Downward cut” and “Right cross-feed, Upward cut” modes. The theoretical and experimental results show reasonably good agreement.     

Hydrodynamic characteristics of a butterfly valve — Prediction of pressure loss characteristics

Investigation on fluidmechanic performance on a butterfly valve has been carried out. A practical valve model of a given thickness and a hub is used for the loss coefficient theory. A theoretical loss coefficient has been formulated from a contraction factor obtained by applying the generalized Borda mouthpiece theory.

Cavitation stages (such as cavitation inception, supercavitation inception, cavitation damage inception, choking cavitation) have been theoretically predicted from the valve loss coefficient. The cavitation prediction has been carried out by applying the free streamline theory, where the relation between the loss coefficient and the critical cavitation factor has been formulated. The results of the theoretical prediction equations agree well with the experimental results.     

Electron-energy-loss near edge structures of six-fold-coordinated Zn in MgO

Electron-energy-loss near edge structures (ELNES) at the Zn-L(2,3) edge and the O-K edge have been measured for 10 mol% ZnO-doped MgO, and were compared with spectra from reference materials. In order to interpret the spectra, first principles molecular orbital calculations were made using model clusters composed of 125 and 153 atoms. Photoabsorption cross sections (PACS) were computed at the Slater's transition state in which a half-filled core hole was included in the self-consistent calculations. The difference in the coordination numbers of Zn was found well distinguishable by the Zn-L(2,3)-edge ELNES. The experimental spectra in the first 25 eV were well reproduced by the theoretical PACS. In this energy region, the Zn-L(2,3)-edge ELNES from four-fold coordinated Zn showed four sets of peaks, whereas the six-fold coordinated Zn exhibits three sets of peaks. The origin of these peaks can be explained by the point symmetry within the first coordination unit. A small shift toward the lower energy side was observed in the O-K edge ELNES of the ZnO-doped MgO as compared with pure MgO. This can be ascribed to the lower energy of the Zn-4s orbital as compared with the Mg-3s orbital, which is the common mechanism to the difference in the band gap between MgO and ZnO.     

Thermo-Optic Dispersion Formula of AgGaSe(2) and Its Practical Applications

The thermo-optic constants of AgGaSe(2) have been measured at 2.052, 3.3913, 5.2955, and 10.5910 mum. These results combined with values reported in the literature were used to construct the thermo-optic dispersion formula that correctly reproduces the temperature-dependent phase-matching conditions for second-harmonic generation and sum-frequency generation of a CO(2) laser as well as the thermally induced lensing effects for the 2.05-mum pumped parametric oscillators.     

A coherent phase diagram of the [(AuCu)0.86Ag0.14]1-XPtX pseudobinary section in Au-Cu-Ag-Pt quaternary system

Hephaestus (or Hephaistos) is an Olympian Greek god, the divine smith, famed for inventions, who taught men glorious crafts. The fixed epithet for Hephaestus, used from the eighth century B.C. by Homer, Hesiod, and other ancient authors until the fifth century A.D., is "Amphiguéeis," i.e., with both feet crooked. He is also called "Kullopodíou," i.e., clubfooted. His body and his gait were described by Homer: "He spake, and from the anvil rose, a huge, panting bulk, halting the while, but beneath him his slender legs moved nimbly ... and with a sponge wiped his face and his two hands withal, and his mighty neck and shaggy breast, ... and grasped a stout staff, and went forth halting; but there moved swiftly to support their lord handmaidens wrought of gold in the semblance of living maids." His anomaly was congenital, as we learn from Hephaestus himself ("I was born misshapen") and from his mother Hera ("But my son Hephaestus whom I bare was weakly among all the blessed gods and shrivelled of foot."). Vase paintings of the sixth century B.C. depict Hephaestus' lameness, but his lameness is not emphasized in the fifth century and thereafter. It is most likely that bilateral congenital clubfeet made Hephaestus lame. Two sons of Hephaestus, Palaemonius and Periphetes, were also reported as having deformed feet.