Identification of Neoantigens in Cancer Cells as Targets for Immunotherapy

The clinical benefits of immune checkpoint blockage (ICB) therapy have been widely reported. In patients with cancer, researchers have demonstrated the clinical potential of antitumor cytotoxic T cells that can be reinvigorated or enhanced by ICB. Compared to self-antigens, neoantigens derived from tumor somatic mutations are believed to be ideal immune targets in tumors. Candidate tumor neoantigens can be identified through immunogenomic or immunopeptidomic approaches. Identification of neoantigens has revealed several points of the clinical relevance. For instance, tumor mutation burden (TMB) may be an indicator of immunotherapy. In various cancers, mutation rates accompanying neoantigen loads may be indicative of immunotherapy. Furthermore, mismatch repair-deficient tumors can be eradicated by T cells in ICB treatment. Hence, immunotherapies using vaccines or adoptive T-cell transfer targeting neoantigens are potential innovative strategies. However, significant efforts are required to identify the optimal epitopes. In this review, we summarize the recent progress in the identification of neoantigens and discussed preclinical and clinical studies based on neoantigens. We also discuss the issues remaining to be addressed before clinical applications of these new therapeutic strategies can be materialized.     

Effect of medium-chain fatty acid positional distribution in dietary triacylglycerol on lymphatic lipid transport and chylomicron composition in rats

The present study was carried out to examine if the positional distribution of medium-chain fatty acid (MCF) in dietary synthetic fat influences lymphatic transport of dietary fat and the chemical composition of chylomicrons in rats with permanent cannulation of thoracic duct. Four types of synthetic triacylglycerol were prepared: (i) sn-1(3) MCF-sn 2 linoleic acid, (ii) interesterified sn-1(3) MCF-sn 2 linoleic acid, (iii) sn-2 MCF-sn-1(3) linoleic acid, and (iv) interesterified sn-2 MCF-sn-1(3) linoleic acid. A purified diet composed of equal amounts of the synthetic fat and cocoa butter was given to rats with permanent lymph duct cannulation. The positional distribution of MCF in the dietary fat had no significant effect on the lymph flow, triacylglycerol output, phospholipid output, lipid composition of chylomicrons, or the particle size. The positional distribution of MCF in the synthetic triacylglycerol was maintained in the chylomicron triacylglycerol. These results showed that MCF in the dietary triacylglycerol is transported into lymphatics and the positional distribution is well preserved in chylomicron triacylglycerol.     

Synthesis and properties of copolymers from diphenylacetylene having a hexaphenylbenzene moiety

Summary Copolymerization of diphenylacetylene having a hexaphenylbenzene group, 1-[p-(pentaphenyl)phenyl]-2-phenylacetylene (1), with a few other diphenylacetylene derivatives (i.e., diphenylacetylene, 1-phenyl-2-[p-(trimethylsilyl)phenyl] acetylene, 1-phenyl-2-[p-n-octylphenyl]acetylene, (2a–c, respectively) and properties of the formed copolymers were investigated. No polymer was obtained in homopolymerization of 1 with TaCl₅-n-Bu₄Sn catalyst owing to steric hindrance. On the other hand, copolymerization with 2a–c proceeded at various feed ratios to give copolymers in moderate yields. Copoly(1/2a) (feed ratio 25/75) was soluble in toluene and CHCl₃ and its weight-average molecular weight (M _w) was ca. 31×10⁴ and relatively high. Copoly(1/2b) and copoly(1/2c) (both feed ratios 5/95) were soluble in common organic solvents, and had a large M _w up to ca. 1×10⁶. These copolymers were yellow to orange solids. Oxidative cyclodehydrogenation of hexaphenylbenzene groups in copoly(1/2a) was attempted in order to convert them into more conjugated groups. Received: 24 January 2000/Accepted: 17 February 2000     

Formation and corrosion of InP/In contacts in hydrochloric acid

Flatband potentials, charge carrier concentrations and their frequency dispersions of p-type and n-type InP in 1.0 M HCl were determined. The cathodic decomposition of InP in this acidic solution is compared with the deposition process of indium from 1.0 M-HCl containing 0.1 M InCl₃. The share of the involved reactions, hydrogen evolution, InP decomposition and indium deposition are investigated. The reaction rates are generally smaller on p-type InP and the reaction speed is much slower but the principal reactions are the same. The kinetics of the indium deposition and dissolution are studied in detail. These reactions are discussed in terms of the preparation of watersplitting photoelectrodes with modified surfaces.     

In‐line monitoring of polyethylene density using near infrared (NIR) spectroscopy

Density and melt index are two key properties in grading commercial polyolefin polymers. For quality assurance, these properties must be controlled as accurately as possible in the production plant. However, the lack of suitable in‐line sensors for these properties makes feedback quality control difficult. In this study, an in‐line density sensor using near infrared (NIR) spectroscopy is developed. The NIR spectra of molten polyethylene in flow are collected by a fiber‐optic device attached to a single screw extruder. By the ratio of the absorption intensity at 1170 nm to that at 1213 nm, the densities of 14 grades of polyethylene were successfully measured. The results were very promising for quality control in the polyethylene production process.     

Evaluation of optimum condition for designing high‐performance electro‐driven polymer hydrogel systems

This study investigated a parameter that determines an optimum condition of the content of the ionic group and the concentration of outer solution for high‐performance electro‐driven polymer hydrogel membranes. The optimum condition for quick bending was determined by a simple method that identified the initial conditions based on Donnan equilibrium theory. Since the bending behavior depends on the initial conditions of the ionic group content and the concentration of the outer solution, it can be predicted by the ratio of the ionic concentrations at the membrane–solution interface; the inverse of the Donnan ratio (1/K) at the initial condition. The bending rate of the membranes showed a maximum value at around 1/K = 0.15. The relationship between several interrelated control factors and the bending dynamics of the gel membranes was established by using the initial system parameters alone. 1/K is the effective simple parameter to determine the optimum condition of the content of the ionic group and the concentration of the outer solution for high‐performance membranes. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 111–118, 2000     

Development of butt welding of polymeric materials based on softening and stirring effects by hot tool

In this study, new butt welding technique was proposed to join polymeric materials in which the polymeric material is softened by a heated tool due to the Joule effect heating of the electric current flow through the tool, and the coalescence of material is done by the stirring action due to the tool rotation. A 3 mm-thick Polycarbonate (PC) sheets were joined in various joining conditions, from which joining mechanism, mechanical properties of joints and process parameters affecting joint performance were investigated. In the experiments, in situ observation with a CCD camera and material temperature measurement during the process, as well as the observation of surface appearance and cross section of the joint and tensile test were performed for these purposes. It was shown from the in situ observation and material temperature measurement that the molten and softened region is formed around the weld tool. It was also shown that sufficient heat input was required to form sound joints with acceptable performance, which depended upon the joining speed and amount of electric current flow through the tool. The observation of joint appearance and cross section revealed that the joint with comparable thickness to base material was obtained under the condition of revolution pitch below 0.08 mm, defined by the ratio of joining speed to tool rotation. It is noticed that joints obtained from the proper conditions have the same mechanical properties as the base material, and that the process parameters of this method were tool rotation speed, welding speed and amount of electric current. These results suggest proposed method is useful for joining the polymeric materials.     

High temperature water–gas shift reaction over hollow Ni–Fe–Al oxide nano-composite catalysts prepared by the solution-spray plasma technique

The effect of Fe content in Ni–Fe–Al oxide nano-composites prepared by the solution-spray plasma technique on their catalytic activity for the high temperature water–gas shift reaction was investigated. The composites showed a hollow sphere structure, with highly dispersed Fe–Ni particles supported on the outer surface of the spheres. When the water–gas shift reaction was performed over an Ni–Al oxide composite catalyst without Fe, undesired CO methanation took place predominantly compared to the water–gas shift reaction, and significant amounts of hydrogen were consumed. When appropriate amounts of Fe were added to the Ni–Al oxide composite catalyst during the plasma process, methanation was suppressed remarkably, without serious loss of activity for the water–gas shift reaction. The catalyst was characterized by STEM, XRD and H₂ chemisorption measurements.     

H2O-tolerant monolithic catalysts for preferential oxidation of carbon monoxide in the presence of hydrogen

Pt–Fe/mordenite (4 wt% Pt–0.5 wt% Fe) powder catalysts were wash-coated onto ceramic straight-channel monoliths by using silica- and/or alumina-sol as a binder, and were evaluated for the preferential oxidation of carbon monoxide (PROX) in a hydrogen-rich gas. In a synthetic reformate gas (1% CO, 1% O₂, 5% H₂O, 20% CO₂, and balance H₂), the CO concentration was reduced to less than 20 ppm at temperatures ranging from 100 to 130 °C. After a certain period of the PROX reaction, condensation of H₂O in the pores of the mordenite-support occurred over the monolithic catalyst, which was wash-coated with alumina-sol, in the lower temperature range (100–120 °C), resulting in a rapid increase in CO concentration. The monolithic catalyst wash-coated with silica-sol, however, showed an excellent tolerance against H₂O condensation and offered a stable catalytic performance, maintaining a CO concentration of ca. 20 ppm for 200 h. The H₂O-tolerant characteristic was attributed to the relatively small adsorption amount of H₂O over the silica-modified monolithic catalyst.     

Synthesis and Reactions of Organometallic Polymers Containing Titanacyclobutene Units in the Main Chain

A new class of polymers containing titanacyclobutene units in the main chain were prepared by the reaction of organic dihalides (2) with a binuclear titanium propargyl complex (3) generated in situ from bis(pentamethylcyclopentadienyl)titanium chloride (Cp*₂TiCl, 1), SmI₂, and 1,4-bis(3-bromopropynyl)benzene (2a). The dark red colored polymers (4) thus obtained are soluble in organic solvents such as tetrahydrofuran and chloroform, and they are stable at ambient temperature under argon atmosphere. The reaction of the titanium-containing polymers (4) with hydrogen chloride was found to give organic polymers (7) containing unsaturated main chain.