Development of advanced fiber-reinforced polymer composites by polymer hybridization technique: Emphasis on cure kinetics,mechanical, and thermomechanical performance

Polymer hybridization technique, consisting of an interlayer arrangement of different polymers, acts as the most economical and promising technique in augmenting the glass fiber-reinforced polymer composite's mechanical properties. This investigation focuses on the effect of cure kinetics on the flexural behavior of glass-polymer hybrid (GPH) composite, and also elucidates the comparative analysis on the mechanical behavior of glass-epoxy (GE) composite, glass-vinyl ester (GVE) composite, and GPH composite. The optimal postcuring temperature has been found to be 200°C for GPH composite among the other postcuring temperatures conducted at 140, 170, and 230°C. Among all these abovementioned composites, highest flexural strength and interlaminar shear strength properties have been recorded by the 200°C postcured GPH composite leading to 10.87 and 18.76% increment, respectively, compared with GE composite. Furthermore, thermomechanical characterization has been done to know the viscoelastic behavior of the GPH composite postcured at different temperatures using dynamic mechanical thermal analysis. The fracture morphology of flexural tested composite samples demonstrated a combination of failure modes. Relevant information on the chemical restructuring and fracture morphology of experimented composite material using Fourier-transform infrared (FTIR) spectroscopy and Scanning electron microscopy (SEM) has also been studied.     

Gestational Exposure to Bisphenol A Affects Testicular Morphology,Germ Cell Associations,and Functions of Spermatogonial Stem Cells in Male Offspring

Exposure to bisphenol A (BPA) in the gestational period damages the reproductive health of offspring; detailed evidence regarding BPA-induced damage in testicular germ cells of offspring is still limited. In this study, pregnant mice (F0) were gavaged with three BPA doses (50 μg, 5 mg, and 50 mg/kg body weight (bw)/day; tolerable daily intake (TDI), no-observed-adverse-effect-level (NOAEL), and lowest-observed-adverse-effect level (LOAEL), respectively) on embryonic days 7 to 14, followed by investigation of the transgenerational effects of such exposure in male offspring. We observed that the NOAEL- and LOAEL-exposed F1 offspring had abnormalities in anogenital distance, nipple retention, and pubertal onset (days), together with differences in seminiferous epithelial stages and testis morphology. These effects were eradicated in the next F2 and F3 generations. Moreover, there was an alteration in the ratio of germ cell population and the apoptosis rate in germ cells increased in F1 offspring at the LOAEL dose. However, the total number of spermatogonia remained unchanged. Finally, a reduction in the stemness properties of spermatogonial stem cells in F1 offspring was observed upon LOAEL exposure. Therefore, we provide evidence of BPA-induced disruption of physiology and functions in male germ cells during the gestational period. This may lead to several reproductive health issues and infertility in offspring.     

Poly(N-vinylpyrrolidone)-stabilized colloidal graphene-reinforced poly(ethylene-co-methyl acrylate) to mitigate electromagnetic radiation pollution

Polymer Bulletin - Electrically conducting flexible polymeric nanocomposite has been fabricated through wet mixing method where conducting inclusion was acoustically exfoliated pristine graphene...     

Novel method for preparation of carboxylated nitrile rubber–natural rubber blends using bis(diisopropyl)thiophosphoryl polysulfides

Bis(diisopropyl)thiophosphoryl trisulfide (DIPTRI) and bis(diisopropyl)thiophosphoryl tetrasulfide (DIPTET) are successfully used as a novel coupling agent and accelerator, respectively, to covulcanize an elastomer blend comprising polar carboxylated nitrile rubber (XNBR) and nonpolar natural rubber (NR). These compounds are capable of forming a chemical link between these dissimilar rubbers to produce a technologically compatible blend as judged by a swelling experiment. The blend vulcanizates thus produced exhibit enhanced physical properties that can further be improved by adopting the two‐stage vulcanization technique and also by judicious selection of the NR:XNBR ratio. The blend morphology assessed by scanning electron microcroscopy micrographs accounts for significant improvement in the physical properties of the blend vulcanizates, particularly in two‐stage vulcanization. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1725–1736, 2001     

Electrical,mechanical, structural,and thermal behaviors of polymeric gel electrolyte membranes of poly(vinylidene fluoride‐co‐hexafluoropropylene) with the ionic liquid 1‐butyl‐3‐methylimidazolium tetrafluoroborate plus lithium tetrafluoroborate

Polymeric gel electrolyte membranes based on the polymer poly(vinylidene fluoride‐co‐hexafluoropropylene) [P(VdF–HFP)] with different weight percentages of the ionic liquid (IL) 1‐butyl‐3‐methylimidazolium tetrafluoroborate plus 0.3M lithium tetrafluoroborate (LiBF₄) salt were prepared and characterized by scanning electron microscopy, X‐ray diffraction, differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared (FTIR) spectroscopy, complex impedance spectroscopy, pulse echo techniques, and Vickers hardness (H) testing. After the incorporation of the IL plus the salt solution in the P(VdF–HFP) polymer, the melting temperature, glass‐transition temperature (T_g), degree of crystallinity, thermal stability, elastic modulus (E), and hardness (H) gradually decreased with increasing content of the IL–salt solution as a result of complexation between the P(VdF–HFP) and IL. This was confirmed by FTIR spectroscopy. A part of the IL and LiBF₄ were found to remain uncomplexed as well. The ionic conductivity (σ) of the polymeric gel membranes was found to increase with increasing concentration of the IL–salt solution. The temperature‐dependent σs of these polymeric gel membranes followed an Arrhenius‐type thermally activated behavior. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41456.     

Phase Evolution,Magnetic, Optical,and Dielectric Properties of Zr‐Substituted Bi0.9Gd0.1FeO3 Multiferroics

Polycrystalline BiFeO₃ (BFO) and Bi_0.90Gd_0.10Fe_1?xZr_xO₃ (x = 0.0–0.10; BGFZ_x) ceramics were synthesized by solid‐state reaction method. Rietveld analysis of X‐ray diffraction patterns showed that BFO and BGFZ_x = 0.0 samples are stabilized in rhombohedral structure (space group R3c), whereas a small fraction of orthorhombic phase (space group Pn2₁a) is observed for BGFZ_{x = 0.03–0.10} samples. Suppression and disappearance of some Raman modes indicated a structural phase transition with addition of Zr dopant at Fe site. Magnetic measurements exhibited weak ferromagnetic behavior of BGFZ_x samples with increasing Zr⁺⁴ concentrations. The insertion of Gd⁺³ ions at Bi⁺³ sites and nonmagnetic Zr⁺⁴ ions at Fe⁺³ sites in Fe–O–Fe network suppressed the spin cycloid structure of BFO which in turn enhanced the magnetization of these ceramics. Electron spin resonance spectra revealed the breaking of spin cycloid of BFO due to the development of free spins with addition of Zr⁺⁴ dopants at Fe sites. UV–Visible diffuse reflectance spectra showed one d–d crystal field transition and two charge‐transfer (C–T) transitions along with a sharp absorption of light in visible region for all samples. Almost frequency‐independent dielectric constant and dielectric loss along with very low values of dielectric loss indicated greatly improved dielectric properties for BGFZ_{x = 0.03–0.10} samples.     

Effect of Porosity on Structure,Young's Modulus,and Thermal Conductivity of SiC Foams by Direct Foaming and Gelcasting

The study demonstrates the aqueous processing of solid‐state‐sintered SiC foams by gelcasting technique. Aside from increasing strength of green bodies, gelcasting monomers were the source of carbon additive which helped in sintering of SiC foams. Sintered foams with the relative density (RD) between 0.44 and 0.11 were processed by direct foaming of SiC slurries followed by gelcasting and sintering. Structural analysis by X‐ray tomography showed the presence of spherical pores with bimodal pore size distribution and the proportion of large size cell and their interconnectivity increased in low RD foams. SEM study revealed that decreased RD resulted in gradual changes in the strut microstructure from the grains with faceted interface to smooth interfaced grains. The analysis of changes in Young's modulus and thermal conductivity with RD were in agreement with the Ashby model for open cell foams.     

Synthesis of diethyl carbonate from ethanol through different routes: A thermodynamic and comparative analysis

In this study, thermodynamic analysis of various possible synthesis routes of diethyl carbonates (DEC), a benign organic carbonate, was carried out and a comparative analysis was performed. Chemical equilibrium constants at standard conditions were calculated using Gibbs free energy of the system. The Benson group contribution method was used to estimate standard heat of formation and standard entropy change of some raw materials/components like dimethyl carbonate. Variation of heat capacity (C_p) with temperature was estimated for different components from the Rozicka‐Domalski model. Variation of chemical equilibrium constants with temperature and pressure was studied for various routes. Synthesis of DEC from ethylene carbonate (EC) was also found to be better considering equilibrium constants at room temperature. The CO₂ route was found to be the most unfavourable route for DEC synthesis due to stability of CO₂ molecules. Moreover, DEC synthesis through the urea route was found to be best at high temperatures since the equilibrium constants were found to increase exponentially. Experiments were conducted for DEC synthesis using the EC route at two temperatures. Activity coefficients were calculated using the UNIFAC model. Experimentally and theoretically determined chemical equilibrium constant values were found to be similar. PRO/II was also used to minimize Gibbs free energy of the system and estimate the equilibrium constants and the results were comparable with those obtained by the equilibrium constant method and the trend was found to be the same for both the methods.     

Photocatalytic,magnetic, and electrochemical properties of La doped BiFeO3 nanoparticles

We successfully prepared La_1?xBi_xFeO₃ (L_xB_1?xFO, x?=?0.01–0.1) nanoparticles using a sol-gel technique, and studied their photocatalytic, magnetic, and electrochemical properties. Structural refinement studies of the prepared nanoparticles revealed a gradual structural transition from rhombohedral to orthorhombic. The average grain size was observed to decrease with increasing the concentration of La. The photocatalytic degradation of Rhodamine B (RhB) in the presence of the prepared nanoparticles was studied under visible light irradiation. The L_0.06B_0.94FO nanoparticles showed higher degradation efficiency compared to pure BiFeO₃ (BFO) nanoparticles. Magnetic studies showed that La doping improved the magnetization of BFO due to the reduction in grain size and destruction of cycloid coupling of spins. Higher specific capacitance values were obtained for La doped BFO (LBFO) nanoparticles compared to BFO nanoparticles. A maximum specific capacitance of 219?F?g^?1 was obtained at a current density of 1?A?g^?1 for LBFO nanoparticles.     

Simultaneous abatement of diesel soot and NOX emissions by effective catalysts at low temperature: An overview

The diesel engine generally achieves the highest fuel, energy, and thermal efficiency due to its very high compression/expansion ratio (14:1 to 25:1). Diesel engines can have a thermal efficiency that exceeds 50%. The main problem is that they emit more pollution like fine black soot particulates (C₈H to C₁₀H) and nitrogen oxides (NO_X). These pollutants have been causing serious problems for human health and the global environment and also impacts on the engine. There are many types of catalysts investigated for simultaneous control of these two pollutants, i.e., platinum group metals (PGM; Pt, Pd, Rh, and Ir) based, spinel-type oxides, hydrotalcite, rare earth metal oxides, mixed transient metal oxides, etc. The high raw material cost of PGM catalysts has become a significant issue, so developing non-PGM catalysts are one of the promising challenges. There are no extra reductants required because soot catalytically oxidizes itself in the presence of NO_X at a faster rate than molecular oxygen and simultaneously NO_X is reduced to nitrogen. The order of oxidation potential of NO_X to oxidized soot in comparison to molecular oxygen is as follows: NO₂ > NO > O₂. To meet the very strict EPA US 2010 and Euro VI regulations of particulate matter (PM) and NO_X for heavy-duty and light-duty vehicular stringent emission, it is very important to apply the integrated catalytic systems to significantly remove PM and NO_X simultaneously. Many papers related to simultaneous control of soot and NO_X over different catalysts have been published but till now some of effective catalysts showing high conversion at low temperatures (possibly within the range typical of diesel exhaust: 150–450°C) have not been reviewed. Thus, this article provides a summary of published information regarding the effective catalysts, their preparation methods, properties, and application for simultaneous control of diesel soot and NO_X.