Bi-layer gelatin active films with “Pitanga” leaf hydroethanolic extract and/or natamycin in the second layer

Research on biopolymers-based active films produced with natural antioxidants and/or antimicrobials has gained attention over the last few years; however, anti-mold activity has been less studied than those of anti-bacteria. The aim of this work was the development and characterization of bi-layer films based on gelatin with natamycin and/or “Pitanga” leaf hydroethanolic extract in the second thin layer in order to determine the effects of these bioactive compounds on bi-layered film properties. The films were characterized regarding their moisture content and solubility in water, optical properties, microstructure, mechanical and thermal properties, water contact angle, water vapor permeability, UV/visible light transmission, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and antioxidant and anti-mold activities. Active films presented activity against Penicillium spp and Aspergillus niger and demonstrated antioxidant activity, as measured by ABTS ^•+ and DPPH ^• methods. Neither additive used in the films' second layer significantly affected the films' moisture content, thermal properties or the molecular interactions of the polymer matrix, assessed by FTIR, although some mechanical properties were affected, and the water contact angle. In conclusion, bi-layer films have reduced the quantity of additives required to maintain the antioxidant and anti-mold activities, as compared to similar monolayer films of the same thickness.     

Great enhancement of mechanical features in PLA based composites containing aligned few layer graphene (FLG), the effect of FLG loading,size, and dispersion on mechanical and thermal properties

Four series of polylactide (PLA) based composite films containing horizontally aligned few layer graphene (FLG) flakes of high aspect ratio and adsorbed albumin are prepared. The mechanical and thermal properties varies with percentage, dispersion degree and size of FLG flakes. Great improvement up to 290% and 360% of tensile modulus and strength respectively were obtained for the composite containing high lateral size of FLG at 0.17% wt, and up to 60% and 80% for the composite with very well dispersed 0.02% wt FLG. The composites of PLA and PEG-PLLA containing very well dispersed FLG flakes at 0.07% wt are ductile showing enhancement of elongation at break up to respectively 80% and 88%. Relatively high electrical conductivity, 5 × 10⁻³ S/cm, is measured for PLA film charged with 3% of FLG.     

When a Tritrophic Interaction Goes Wrong to the Third Level: Xanthoxylin From Trees Causes the Honeybee Larval Mortality in Colonies Affected by the River Disease

The “River Disease” (RD), a disorder impacting honeybee colonies located close to waterways with abundant riparian vegetation (including Sebastiania schottiana, Euphorbiaceae), kills newly hatched larvae. Forager bees from RD-affected colonies collect honeydew excretions from Epormenis cestri (Hemiptera: Flatidae), a planthopper feeding on trees of S. schottiana. First-instar honeybee larvae fed with this honeydew died. Thus, we postulated that the nectars of RD-affected colonies had a natural toxin coming from either E. cestri or S. schottiana. An untargeted metabolomics characterization of fresh nectars extracts from colonies with and without RD allowed to pinpoint xanthoxylin as one of the chemicals present in higher amounts in nectar from RD-affected colonies than in nectars from healthy colonies. Besides, xanthoxylin was also found in the aerial parts of S. schottiana and the honeydew excreted by E. cestri feeding on this tree. A larva feeding assay where xanthoxylin-enriched diets were offered to 1^st instar larvae showed that larvae died in the same proportion as larvae did when offered enriched diets with nectars from RD-colonies. These findings demonstrate that a xenobiotic can mimic the RD syndrome in honeybee larvae and provide evidence of an interspecific flow of xanthoxylin among three trophic levels. Further, our results give information that can be considered when implementing measures to control this honeybee disease.

     

Ni/Al Intermetallics Plasma Transferred Arc Processing

TAILORING COMPONENT SUFACES for elevatedtemperature operations has been a goal of researchersduring the last century.Process and material selectionare the key factors for this development.In particularlythe latter can be described to have started with thedevelopment of stainless steels.Ni and Co based alloys,the superalloys,attended the increasing technologicaldemands for higher service temperatures(1).Morerecently the higher operating temperatures ofequipments,such as gas turbines,r…     

The Influence of High Temperature Exposure on the Wear Performance of a Ni Based Alloy PTA Coating

Degradation phenomena like wear and corrosion, may have their effects accelerated as components operate at high temperature. The aim of this work is to make an indirect evaluation of the influence of high temperature exposure on wear behavior of Ni coatings. A Ni-Cr-Mo-W alloy, was deposited with Plasma Transferred Arc (PTA) process. An indirect approach based on the Ahrrenius relationship was used to evaluated long time exposures at high temperatures. To simulate longer exposures at lower temperatures, coatings were exposed to higher temperatures for the same time interval. So coatings were soaked in an air furnace at 650℃, 1000℃ and 1200℃. Metal/metal wear behavior was evaluated by pin-on-disc tests. Pins were removed from the coatings by eletrodischarge machining and rubbed against a VC31 quenched and tempered tool steel. Two sets of wear tests were run at 2m/s, for different loads (0.5, 1.0, 2.0 and 3.0Kg) and for different sliding distances (120, 720, 1080, 1440 and 1800m).Coatings characterization was done by scanning electronic microscopy and Vickers microhardness. Results showed as temperature is increased, coatings wear performance is altered,and this is associated with microstructural changes.     

Probabilistic consensus clustering using evidence accumulation

Machine Learning - Clustering ensemble methods produce a consensus partition of a set of data points by combining the results of a collection of base clustering algorithms. In the evidence...     

Characterizing peers communities and dynamics in a P2P live streaming system

Despite the large number of works devoted to understand P2P live streaming applications, most of them put forth so far rely on characterizing the static view of these systems. In this work, we characterize the SopCast, one of the most important P2P live streaming applications. We focus on its dynamics behavior as well as on the community formation phenomena. Our results show that SopCast presents a low overlay topology diameter and low end-to-end shortest path. In fact, diameter is smaller than 6 hops in almost 90 % of the observation time. More than 96 % of peers’ end-to-end connections present only 3 hops. These values combined may lead to low latencies and a fast streaming diffusion. Second, we show that communities in SopCast are well defined by the streaming data exchange process. Moreover, the SopCast protocol does not group peers according to their Autonomous System. In fact, the probability that a community contains 50 % of its members belonging to the same AS (when we observe the largest AS of our experiments) is lower then 10 %. Peers exchange more data with partners belonging to the same community instead of peers inside the same AS. For the largest AS we have, less than 18 % of peer traffic has been exchanged with another AS partners. Finally, our analysis provides important information to support the future design of more efficient P2P live streaming systems and new protocols that exploit communities’ relationships.     

Assessment of the Impact of Stormwater Characteristics on Clogging in Stormwater Filters

Hydraulic conductivity of granular filter media and its evolution over time is a key design parameter for stormwater filtration and infiltration systems that are now widely used in management of polluted urban runoff. In fact, clogging of filter media is recognised as the main limiting factor of these stormwater treatment systems. This paper focuses on the effect of stormwater characteristics on the clogging of stormwater filters. Effect of five different operational regimes has been tested in this study of sediment concentration; pollutant concentrations; stormwater sediment size; loading rate and stormwater loading/dosing regime and compared with the Base case. For each operational condition, five column replicates were tested. Results suggest that sediment concentration in stormwater is a significant parameter affecting hydraulic and treatment performance, eventually affecting longevity of these stormwater treatment systems. Further, the size of sediments (and their relation to the size of filter media grains) in stormwater was found to be an important parameter to be considered in design of coarse filters with high infiltration rates that are used for stormwater treatment. As expected, the addition of metals and nutrients had limited or no contribution to changes in hydraulic or sediment removal performance of the studied stormwater filters. Whilst loading rate was found to be an important parameter affecting the hydraulic and treatment performance of these systems, any variation in the stormwater loading regime had a limited effect on their performance. This study therefore develops an understanding of the effect of catchment characteristics on design of filters and hence their longevity and maintenance needs.     

Integrating the implementation of the European Union Water Framework Directive and Floods Directive in Ireland

Water Framework Directive (WFD) statutory authorities and stakeholders in Ireland are now challenged with the issue of how the proposed programmes of measures in the newly required River Basin Management Plans - designed to protect and restore good ecology by reverting as closely as possible back to natural conditions - are to be implemented in a way that concurrently complies with other existing and emerging intersecting European Union legislation, such as the Floods Directive (FD). The WFD is driven largely by ecological considerations, whereas the FD and other legislation are more geared towards protecting physical property and mitigating public safety risks. Thus many of the same waterbodies, especially heavily modified waterbodies, arguably have somewhat competing policy objectives put upon them. This paper explores the means by which Ireland might best achieve the highest degrees of cost effectiveness, economic efficiency and institutional durability in pursuing the common and overarching objective of the WFD and FD - to ensure Irish waterways are put to their highest valued uses.     

Preventing Youth Pregnancy: Dialogue and Deliberation in a Science Museum Exhibit

ABSTRACT

In this article, we explore how visitors engage with a science museum exhibit that displays controversial topics. Through a case study methodology, we focus on the Brazilian exhibit Preventing Youth Pregnancy that delves into teen pregnancy, sexual practices, and sexually transmitted diseases. Using the lens of science communication (an emergent field of research) we explore (a) communication patterns established between the exhibit and the public and (b) the dimensions of engagement that visitors experienced. Data were collected through observations and interviews with visitors, field notes, exit comment cards, and interviews with staffers. Our findings revealed the potential of articulating different models of science communication and exposed a visitor experience in which informed decision making, sharing of personal stories, co-production of knowledge, and learning how to care (and act) were at play while negotiating the complexities of the issues raised by the displays.