Robust load balancing under traffic uncertainty��tractable models and efficient algorithms

Routing configurations that have been optimized for a nominal traffic scenario often display significant performance degradation when they are subjected to real network traffic. These degradations are due to the inherent sensitivity of classical optimization techniques to changes in model parameters combined with the significant traffic variations caused by demand fluctuations, component failures and network reconfigurations. In this paper, we review important sources for traffic variations in data networks and describe tractable models for capturing the associated traffic uncertainty. We demonstrate how robust routing settings with guaranteed performance for all foreseen traffic variations can be effectively computed via memory efficient iterative techniques and polynomial-time algorithms. The techniques are illustrated on real data from operational IP networks.     

Interfacial Connections between Organic Perovskite/n+ Silicon/Catalyst that Allow Integration of Solar Cell and Catalyst for Hydrogen Evolution from Water

The rapidly increasing solar conversion efficiency (PCE) of hybrid organic–inorganic perovskite (HOIP) thin-film semiconductors has triggered interest in their use for direct solar-driven water splitting to produce hydrogen. However, application of these low-cost, electronic-structure-tunable HOIP tandem photoabsorbers has been hindered by the instability of the photovoltaic-catalyst-electrolyte (PV+E) interfaces. Here, photolytic water splitting is demonstrated using an integrated configuration consisting of an HOIP/n⁺silicon single junction photoabsorber and a platinum (Pt) thin film catalyst. An extended electrochemical (EC) lifetime in alkaline media is achieved using titanium nitride on both sides of the Si support to eliminate formation of insulating silicon oxide, and as an effective diffusion barrier to allow high-temperature annealing of the catalyst/TiO₂-protected-n⁺silicon interface necessary to retard electrolytic corrosion. Halide composition is examined in the (FA_1-xCs_x)PbI₃ system with a bandgap suitable for tandem operation. A fill factor of 72.5% is achieved using a Spiro-OMeTAD-hole-transport-layer (HTL)-based HOIP/n⁺Si solar cell, and a high photocurrent density of −15.9 mA cm⁻² (at 0 V vs reversible hydrogen electrode) is attained for the HOIP/n⁺Si/Pt photocathode in 1 m NaOH under simulated 1-sun illumination. While this thin-film design creates stable interfaces, the intrinsic photo- and electro-degradation of the HOIP photoabsorber remains the main obstacle for future HOIP/Si tandem PEC devices.     

Passive 350 GHz Video Imaging Systems for Security Applications

Journal of Infrared, Millimeter, and Terahertz Waves - Passive submillimeter-wave imaging is a concept that has been in the focus of interest as a promising technology for personal security...     

On Surface Losses in Direct Metal Laser Sintering Printed Millimeter and Submillimeter Waveguides

Different lengths of WR3 (220–330 GHz) and WR10 (75–110 GHz) waveguides are fabricated through direct metal laser sintering (DMLS). The losses in these waveguides are measured and modelled using the Huray surface roughness model. The losses in WR3 are around 0.3 dB/mm and in WR10 0.05 dB/mm. The Huray equation model is accounting relatively good for the attenuation in the WR10 waveguide but deviates more in the WR3 waveguide. The model is compared to finite element simulations of the losses assuming an approximate surface structure similar to the resulting one from the DMLS process.     

Quantification of aroma vapours sorbed in polyethene films using supercritical carbon dioxide

Extraction with supercritical carbon dioxide was used to quantity the amounts of seven different aroma vapours sorbed in polyethene films. The method was found to completely extract all aroma compounds from the films. The solution of aroma compounds in the polymer films decreased with increasing polymer density. Monoterpenes were always completely sorbed in the films, whereas aldehydes and ketones had a much lower affinity for the films. The sulphur-containing compound, thiophene, was difficult to analyse due to its adsorption on metal surfaces.     

Alkali retention/separation during bagasse gasification: a comparison between a fluidised bed and a cyclone gasifier

Biomass fuelled integrated gasification/gas turbines (BIG/GTs) have been found to be one of the most promising technologies to maximise electricity output in the sugar industry. However, biomass fuels contain alkali metals (Na and K) which may be released during the gasification processes and cause deleterious effects on the downstream hardware (e.g. the blades of gas turbines). Much research has therefore been focused on different kinds of gas cleaning. Most of these projects are using a fluidised bed gasifier and includes extensive gas cleaning which leads to a high capital investment.

Increasing alkali retention/separation during the gasification may lead to improved producer gas quality and reduced costs for gas cleaning. However, very little quantitative information is available about the actual potential of this effect. In the present work, comparative bench-scale tests of bagasse gasification were therefore run in an isothermal fluidised bed gasifier and in a cyclone gasifier to evaluate which gasification process is most attractive as regards alkali retention/separation, and to try to elucidate the mechanisms responsible for the retention.

The alkali retention in the fluidised bed gasifier was found to be in the range of 12–4% whereas in the cyclone gasifier the alkali separation was found to be about 70%. No significant coating of the fluidised bed's bed material particles could be observed. The SEM/EDS and the elemental maps of the bed material show that a non-sticky ash matrix consisting of mainly Si, Al and K were distributed in a solid form separated from the particles of bed material. This indicates the formation of a high temperature melting potassium containing silicate phase, which is continuously scavenged and lost from the bed through elutriation.     

Surface Reconstruction Engineering with Synergistic Effect of Mixed-Salt Passivation Treatment toward Efficient and Stable Perovskite Solar Cells

Surface passivation treatment is a widely used strategy to resolve trap-mediated nonradiative recombination toward high-efficiency metal-halide perovskite photovoltaics. However, a lack of passivation with mixture treatment has been investigated, as well as an in-depth understanding of its passivation mechanism. Here, a systematic study on a mixed-salt passivation strategy of formamidinium bromide (FABr) coupled with different F-substituted alkyl lengths of ammonium iodide is demonstrated. It is obtained better device performance with decreasing chain length of the F-substituted alkyl ammonium iodide in the presence of FABr. Moreover, they unraveled a synergistic passivation mechanism of the mixed-salt treatment through surface reconstruction engineering, where FABr dominates the reformation of the perovskite surface via reacting with the excess PbI₂. Meanwhile, ammonium iodide passivates the perovskite grain boundaries both on the surface and top perovskite bulk through penetration. This synergistic passivation engineer results in a high-quality perovskite surface with fewer defects and suppressed ion migration, leading to a champion efficiency of 23.5% with mixed-salt treatment. In addition, the introduction of the moisture resisted F-substituted groups presents a more hydrophobic perovskite surface, thus enabling the decorated devices with excellent long-term stability under a high humid atmosphere as well as operational conditions.     

Influence of wind turbine flexibility on loads and power production

Most aeroelastic codes used today assume small blade deflections and application of loads on the undeflected structure. However, with the design of lighter and more flexible wind turbines, this assumption is not obvious. By scaling the system mass and stiffness properties equally, it is possible to compare wind turbines of different degrees of slenderness and at the same time keep system frequencies the same in an undeformed state. The developed model uses the commercial finite element system MSC. Marc, focused on non‐linear design and analysis, to predict the structural response. The aerodynamic model AERFORCE, used to transform the wind to loads on the blades, is a blade element momentum model. A comparison is made between different slenderness ratios in three wind conditions below rated wind speed. The results show that large blade deflections have a major influence on power production and the resulting structural loads and must be considered in the design of very slender turbines. Copyright © 2005 John Wiley & Sons, Ltd.     

Birefringence–An important property of plastic substrates for magneto-optical storage disks

Birefringence is an important substrate property for optical data storage media. The basic definitions of birefringence and its relation to the chemical nature of polycarbonate are outlined. The polarizability of the monomer unit, expressed in the rheo-optical constant and the degree of remaining polymer chain orientation, determines the level of birefringence in polycarbonate disk substrates. Based on this theory, the theory of blending materials with positive and negative rheo-optical constants Is developed, and the current work with polycarbonate/polystyrene blends is reviewed. The biggest disadvantage of the reviewed system Js that only binary systems with low LCST (lower critical solution temperature) (<240°C) can be formulated. Finally, we report on successful development work of a single-phase blend of a modified polycarbonate with a special styrene-acrylonitrile copolymer. The experimental results are compared with the theoretical expectations, and the implications on the injection molding of disk substrates are discussed.     

Tissue degradation,amino acid liberation and bacterial decomposition of bulk stored capelin

Bulk stored capelin with high contents of feed in the gut is easily solubilised because of high proteolytic activity. The amino acids most quickly liberated are arginine, serine, histidine, leucine, lysine and tyrosine; glycine, aspartic acid and glutamic acid are liberated at a slower rate. Bacterial activity results in a rapid and considerable decrease in total amounts of tyrosine, lysine, serine, arginine and histidine. The main products formed by bacterial decomposition of lysine, histidine and arginine are cadaverine, histamine and putrescine, respectively. Storage of capelin in the presence of antibiotics increased the amounts of free amino acids and total amino acids. After 10 days' storage at 6°C, about 30% of the total amino acid content in fish treated with antibiotics were fee amino acids.