Computer-based automation of concentration measurements with ion-selective electrodes

An integrated computer system consisting of an expandable ionanalyzer and a PC has been used to automate concentration measurements with ion-selective electrodes (ISEs). The ionanalyzer determines ionic concentrations using a reference electrode coupled with an ISE. The measurements and calibrations are carried out in a thermostated sample changer equipped with a flow cell. The data obtained by the ionanalyzer are sent via a standard RS 232-C interface to a microcomputer. In this paper, we describe the automatic data acquisition system and the subsequent processing of the measurements. One program (Transorion) automatically collects the measurements carried out by the ionanalyzer, giving a real-time graphic representation of the measurement on the computer screen. A second program (Graforion) facilitates the management of the data stored by the first program, and listing and graphics of these can be obtained on the printer/plotter. The method has been used to study continuous concentration changes in an aqueous solution of potassium iodide.     

Fluorescence d’une fibre optique en silice dopée au néodyme

Induced-emission cross section for neodymium doped optical fiber are measured from temporal and spectral studies of spontaneous fluorescence. Induced-emission cross section values are 1.5 to 2.5 10^-20 cm² according to fibers and fluorescence bands. From a semi-classical theory of absorption-emission process in the fiber we calculate the optical gain and justifie the use of the Füchtbauer-Ladenburg relation for fibers.     

Tracking human faecal contamination in tropical reservoirs in Puerto Rico

Using a combination of chemical and microbiological (culture-dependent and -independent) approaches, sources of human faecal contamination were identified in two water reservoirs in Puerto Rico – Guajataca and La Plata. Fluorescence from optical brighteners (OB) – commonly found in laundry detergents – was used as an indicator of contamination from septic systems and other household discharges. Traditional indicators of faecal contamination (e.g. Escherichia coli; faecal enterococci) were enumerated, and human faecal contamination was confirmed through detection of Bifidobacterium adolescentis utilizing polymerase chain reaction (PCR)-based analyses. For Guajataca Reservoir, four of 19 sampling sites (21%) were positive for the presence of B. adolescentis under baseflow conditions. The OB fluorescence data suggested that the most likely source for three of these sites was residential, whereas the source of contamination at the remaining site, although of human origin, was probably non-residential. B. adolescentis was present in 83% (19 of 23) of the sampling sites in La Plata. The La Plata sources were more difficult to identify because samples were taken under stormflow conditions, although the presence of OB fluorescence suggested a residential origin in a number of instances. OB fluorescence and traditional bacterial indicators of faecal contamination produced a number of false positive and negative findings for both reservoirs, pointing to the importance of understanding the limitations of these tools for tropical freshwater systems. The results of this study should be useful in developing a weight-of-evidence approach for the identification of potential sources and extent of human faecal contamination in similar tropical reservoirs, a necessary step in the development of management plans to reduce or eliminate these sources.     

New BIST Schemes for Structural Testing of Pipelined Analog to Digital Converters

Two alternative BIST schemes are proposed for structural testing of pipelined Analog-to-Digital Converters (ADC). They are oriented to fault detection in the converter stages rather than to measure the whole ADC electrical performance parameters. The operational principle of both strategies relies on testing every ADC stage reconfigured as an A/D-D/A block and applying as input a simple DC stimuli set which is easily obtained, without strong precision requirements, by a resistive network. The main differences between both strategies relate to the way the output response is evaluated. In the BIST#1 scheme, analog and digital outputs are compared with reference levels generated with a reference D/A converter and a counter. In the BIST#2 strategy, only digital outputs are available and they are compared with fault-free values previously stored in an on-chip register. The new techniques are intended to be used in pipelined converters of an arbitrary number of conversion stages and with a digital self-correction mechanism.     

Experimental evaluation of alkaline treatment as a method for enhancing the enzymatic digestibility of autohydrolysed Acacia dealbata

BACKGROUND: Acacia dealbata wood samples were subjected to hydrothermal processing in aqueous media, yielding a liquid phase (containing xylooligosaccharides) and a solid phase, enriched in cellulose, which was treated with alkaline solutions to obtain solids with improved susceptibility towards enzymatic hydrolysis. The effects of the most influential variables involved in the alkaline processing (sodium hydroxide concentration, temperature and reaction time) on solid yield, solid composition and kinetic parameters involved in the modelling of the enzymatic hydrolysis were assessed using the response surface methodology (RSM). RESULTS: Analysis of the RSM equations allowed selection of operational conditions (temperature = 130 °C, sodium hydroxide concentration = 4.5%, time of alkaline processing = 3 h), leading to selective removal of non‐cellulosic components and to a solid substrate highly susceptible to enzymatic hydrolysis. Operating at an enzyme loading of 20 FPU (filter paper units) g^?1 autohydrolysed, extracted solids (denoted AES) with a liquor to solid ratio of 30 g liquor g^?1 AES, solutions containing 29.7 g glucose L^?1 (corresponding to a yield of 47.3 g glucose per 100 g solids from autohydrolysis) were obtained after 48 h. CONCLUSION: Samples of Acacia dealbata wood were processed by autohydrolysis, sodium hydroxide treatment and enzymatic hydrolysis, yielding xylooligomers and processed solids highly susceptible to the enzymatic hydrolysis. Copyright © 2009 Society of Chemical Industry     

Effects of Duct Types and Emulsifiable Oils on Bond and Friction Losses in Posttensioned Concrete

Emulsifiable oils are often used in posttensioned construction to reduce friction losses and provide temporary corrosion protection for tendons prior to grouting. This paper addresses the effects of two emulsifiable oils and three duct types on bond and friction losses. Bond test results indicate that corrugated galvanized steel ducts provide better anchorage than corrugated HDPE ducts. Rigid steel pipes performed poorly because of failure at the duct-concrete or grout-duct interface. Bond test results also indicate that the ultimate strength of posttensioned specimens with oiled tendons is similar to or better than the ultimate strength of specimens with unoiled tendons. However, specimens with oiled tendons experienced greater slip at a given load than specimens with unoiled tendons. Friction test results indicate that current recommended design values for the coefficient of friction for steel pipes and galvanized ducts are accurate. However, the measured coefficient for HDPE ducts is significantly less than the AASHTO-recommended value. Friction tests also indicate that lubrication of the tendon reduces the friction coefficient by 15% in rigid steel pipes and HDPE ducts if stressing occurs while the oil is fresh.     

Effect of process variables on liquid hot water pretreatment of wheat straw for bioconversion to fuel‐ethanol in a batch reactor

BACKGROUND: Crop residues as wheat straw are potential sources for fuel‐ethanol production as an alternative to current production based on starch‐ or sugar‐containing feedstocks. In this work, the effect of liquid hot water (LHW) process parameters, i.e. temperature (170 and 200 °C), residence time (0 and 40 min), solid concentration (5% and 10% (w/v)) and overpressure applied in the reactor (30 bar and no overpressure), on pretreatment of wheat straw was studied using a full factorial experimental design. Pretreatment effectiveness was evaluated based on the composition of the solid and liquid fractions obtained after filtration of pretreated material, and the susceptibility of the solid fraction to enzymatic hydrolysis (EH) using commercial cellulases. RESULTS: Statistical analysis showed that only temperature and time, within the limits of the experimental range, have a significant effect on the responses studied. While the effect of pretreatment time in hemicellulose‐derived sugar recovery in prehydrolyzate depends on temperature, EH yield was enhanced as both temperature and time were increased. Maximum EH yield was 96 g glucose per 100 g potential glucose in pretreated residue. Xylan and acetyl groups content remaining in solid residue after pretretament, which were found to be directly correlated, had a marked effect on pretreated substrate degradability. CONCLUSIONS: LHW is an effective pretreatment to enhance the potential of wheat straw as substrate for ethanol production. Maximum hemicellulose‐derived sugar recovery (53% of content in raw material) and EH yield (96% of theoretical) fall within different temperature and time intervals, suggesting separate optimization designs for these responses. Copyright © 2007 Society of Chemical Industry     

Modelling of Self-Induced Oscillations in the Mixing Head of a RIM Machine

In this paper, the self-induced oscillations in the mixing head of a RIM machine were modelled. An analytical and simple correlation was derived between the Strouhal number and the averaged pressure drop along the amplitude of the oscillation in the mixing chamber. This correlation theoretically identified that the frequency of the oscillations could be well correlated by the jet Reynolds number, Re_d, and the dimensionless distance between the two jets as proposed by Denshchikov et al., Fluid Dyn. 3 , 460-462 (1983). The flow field dynamics in the mixing head was simulated successfully by Fluent and the computed pressure fluctuations were used to calculate the frequencies of the oscillations in the mixing head. The calculated Strouhal numbers are in good agreement with the dominant frequency from the power spectra of the measured velocity component u_x (Santos, 2003). Finally, the effect of Re_d and Froude number, Fr, on the Strouhal number was investigated in the impingement region. The average Strouhal number showed a decrease with the Reynolds numbers, due to the increasing randomness of flow field in the impingement region. It was also found that the operations at lower values of Fr presented an increasing stability up to the point where the system is unable to present dynamic evolution. The model in this paper provides a theoretical starting point towards understanding of the quantities of the oscillatory flow in the mixing head, as well as a numerical approach to evaluate the dominant frequency in the mixing chamber.