New BIST Schemes for Structural Testing of Pipelined Analog to Digital Converters

Two alternative BIST schemes are proposed for structural testing of pipelined Analog-to-Digital Converters (ADC). They are oriented to fault detection in the converter stages rather than to measure the whole ADC electrical performance parameters. The operational principle of both strategies relies on testing every ADC stage reconfigured as an A/D-D/A block and applying as input a simple DC stimuli set which is easily obtained, without strong precision requirements, by a resistive network. The main differences between both strategies relate to the way the output response is evaluated. In the BIST#1 scheme, analog and digital outputs are compared with reference levels generated with a reference D/A converter and a counter. In the BIST#2 strategy, only digital outputs are available and they are compared with fault-free values previously stored in an on-chip register. The new techniques are intended to be used in pipelined converters of an arbitrary number of conversion stages and with a digital self-correction mechanism.     

Experimental evaluation of alkaline treatment as a method for enhancing the enzymatic digestibility of autohydrolysed Acacia dealbata

BACKGROUND: Acacia dealbata wood samples were subjected to hydrothermal processing in aqueous media, yielding a liquid phase (containing xylooligosaccharides) and a solid phase, enriched in cellulose, which was treated with alkaline solutions to obtain solids with improved susceptibility towards enzymatic hydrolysis. The effects of the most influential variables involved in the alkaline processing (sodium hydroxide concentration, temperature and reaction time) on solid yield, solid composition and kinetic parameters involved in the modelling of the enzymatic hydrolysis were assessed using the response surface methodology (RSM). RESULTS: Analysis of the RSM equations allowed selection of operational conditions (temperature = 130 °C, sodium hydroxide concentration = 4.5%, time of alkaline processing = 3 h), leading to selective removal of non‐cellulosic components and to a solid substrate highly susceptible to enzymatic hydrolysis. Operating at an enzyme loading of 20 FPU (filter paper units) g^?1 autohydrolysed, extracted solids (denoted AES) with a liquor to solid ratio of 30 g liquor g^?1 AES, solutions containing 29.7 g glucose L^?1 (corresponding to a yield of 47.3 g glucose per 100 g solids from autohydrolysis) were obtained after 48 h. CONCLUSION: Samples of Acacia dealbata wood were processed by autohydrolysis, sodium hydroxide treatment and enzymatic hydrolysis, yielding xylooligomers and processed solids highly susceptible to the enzymatic hydrolysis. Copyright © 2009 Society of Chemical Industry     

Effects of Duct Types and Emulsifiable Oils on Bond and Friction Losses in Posttensioned Concrete

Emulsifiable oils are often used in posttensioned construction to reduce friction losses and provide temporary corrosion protection for tendons prior to grouting. This paper addresses the effects of two emulsifiable oils and three duct types on bond and friction losses. Bond test results indicate that corrugated galvanized steel ducts provide better anchorage than corrugated HDPE ducts. Rigid steel pipes performed poorly because of failure at the duct-concrete or grout-duct interface. Bond test results also indicate that the ultimate strength of posttensioned specimens with oiled tendons is similar to or better than the ultimate strength of specimens with unoiled tendons. However, specimens with oiled tendons experienced greater slip at a given load than specimens with unoiled tendons. Friction test results indicate that current recommended design values for the coefficient of friction for steel pipes and galvanized ducts are accurate. However, the measured coefficient for HDPE ducts is significantly less than the AASHTO-recommended value. Friction tests also indicate that lubrication of the tendon reduces the friction coefficient by 15% in rigid steel pipes and HDPE ducts if stressing occurs while the oil is fresh.     

Effect of process variables on liquid hot water pretreatment of wheat straw for bioconversion to fuel‐ethanol in a batch reactor

BACKGROUND: Crop residues as wheat straw are potential sources for fuel‐ethanol production as an alternative to current production based on starch‐ or sugar‐containing feedstocks. In this work, the effect of liquid hot water (LHW) process parameters, i.e. temperature (170 and 200 °C), residence time (0 and 40 min), solid concentration (5% and 10% (w/v)) and overpressure applied in the reactor (30 bar and no overpressure), on pretreatment of wheat straw was studied using a full factorial experimental design. Pretreatment effectiveness was evaluated based on the composition of the solid and liquid fractions obtained after filtration of pretreated material, and the susceptibility of the solid fraction to enzymatic hydrolysis (EH) using commercial cellulases. RESULTS: Statistical analysis showed that only temperature and time, within the limits of the experimental range, have a significant effect on the responses studied. While the effect of pretreatment time in hemicellulose‐derived sugar recovery in prehydrolyzate depends on temperature, EH yield was enhanced as both temperature and time were increased. Maximum EH yield was 96 g glucose per 100 g potential glucose in pretreated residue. Xylan and acetyl groups content remaining in solid residue after pretretament, which were found to be directly correlated, had a marked effect on pretreated substrate degradability. CONCLUSIONS: LHW is an effective pretreatment to enhance the potential of wheat straw as substrate for ethanol production. Maximum hemicellulose‐derived sugar recovery (53% of content in raw material) and EH yield (96% of theoretical) fall within different temperature and time intervals, suggesting separate optimization designs for these responses. Copyright © 2007 Society of Chemical Industry     

Modelling of Self-Induced Oscillations in the Mixing Head of a RIM Machine

In this paper, the self-induced oscillations in the mixing head of a RIM machine were modelled. An analytical and simple correlation was derived between the Strouhal number and the averaged pressure drop along the amplitude of the oscillation in the mixing chamber. This correlation theoretically identified that the frequency of the oscillations could be well correlated by the jet Reynolds number, Re_d, and the dimensionless distance between the two jets as proposed by Denshchikov et al., Fluid Dyn. 3 , 460-462 (1983). The flow field dynamics in the mixing head was simulated successfully by Fluent and the computed pressure fluctuations were used to calculate the frequencies of the oscillations in the mixing head. The calculated Strouhal numbers are in good agreement with the dominant frequency from the power spectra of the measured velocity component u_x (Santos, 2003). Finally, the effect of Re_d and Froude number, Fr, on the Strouhal number was investigated in the impingement region. The average Strouhal number showed a decrease with the Reynolds numbers, due to the increasing randomness of flow field in the impingement region. It was also found that the operations at lower values of Fr presented an increasing stability up to the point where the system is unable to present dynamic evolution. The model in this paper provides a theoretical starting point towards understanding of the quantities of the oscillatory flow in the mixing head, as well as a numerical approach to evaluate the dominant frequency in the mixing chamber.     

Zerstörungsfreie Bestimmung elastischer Eigenschaften quadratischer 3-schichtiger Brettsperrholzplatten mit symmetrischem Aufbau

Some of the most important material properties of engineered wood products, like cross-laminated solid wood panels, are the elastic properties. Regarding panels, the two in plane MOEs (E_ii) and three shear moduli (G_ij) are of particular interest. In order to determine these parameters with an economically and non-destructive technique, a method was developed which allows to determine all five parameters in one experiment only. This method was approved on 24 square-shaped cross-laminated solid wood panels with side-length of 2.5 m, thickness of 70 mm and two different layer sizes. The panels were produced by two plants applying different technologies. The determined elastic parameters were verified by bending tests and compared with stiffness parameters calculated on basis of the elastic compound theory. Four elastic parameters could be determined and proven to be correct. The results did neither depend on the different production technologies of the panels nor on the two different compositions of layers. The determinability of the elastic parameter G₂₃ depends on the geometry of the panels. Noteworthy is the fact that stiffness parameters calculated assuming that the raw material of the single layers corresponds to strength class C24, can be on the ‘‘unsafe side’’.     

Ultra-deep oxidative desulfurization of diesel fuel by the Mo/Al2O3-H2O2 system: The effect of system parameters on catalytic activity

This work presents the results obtained in the development of Mo/γ-Al₂O₃ catalysts and their evaluation in the oxidative desulfurization (OD) process of diesel fuel using hydrogen peroxide as the oxidizing reagent. The catalysts were prepared by equilibrium adsorption using several molybdenum precursors and aluminas with different acidity values. They were characterized by Raman spectroscopy. The effect of the reaction time, reaction temperature, nature of solvent, concentration of solvent and hydrogen peroxide, content of molybdenum and phosphate in the catalysts were investigated. The results showed that the activity for sulfur elimination depends mainly on the presence of hepta- and octamolybdates species on the catalyst support and the use of a polar aprotic solvent. Likewise, the presence of phosphate markedly increases the sulfur elimination. In this way, it is possible to reduce sulfur level in diesel fuel from about 320 to less than 10 ppmw at 333 K and atmospheric pressure. Additionally, on the basis of the results obtained a mechanistic proposal for this reaction is described, as an oxidation mechanism by nucleophilic attack of the sulfur atom on peroxo species of hepta- and octamolybdates, but a mechanism involving the singlet oxygen presence can be discarded.     

Synthesis,characterization and application of poly[(1‐vinyl‐2‐pyrrolidone)‐co‐(2‐hydroxyethyl methacrylate)] as controlled‐release polymeric system for 2,4‐dichlorophenoxyacetic chloride using an ultrafiltration technique

BACKGROUND: Polymers supporting chemicals used in agriculture have recently been developed to overcome the serious environmental problems of conventional agrochemicals. The success of these formulations is based on a suitable choice of polymer support. Degradable polymeric hydrogels are of particular interest. The gradual release of the bioactive agent can be achieved by hydrolytic or enzymatic cleavage of the linking bond. RESULTS: In this context, poly[(1‐vinyl‐2‐pyrrolidone)‐co‐(2‐hydroxyethyl methacrylate)] [poly(NVP‐co‐HEMA)] has been used as a bioactive carrier reagent. Herein, we report a controlled‐release system with the herbicide 2,4‐dichlorophenoxyacetic acid (2,4‐D) using an ultrafiltration system. Hydrolysis was studied by testing the release at various pH values. A high release with poly(NVP‐co‐HEMA)–2,4‐D was observed at pH = 7 and 10 after two days (Z = 2). The release percentage of copolymer–herbicide increased at pH = 10. It showed release values between 79.0 and 94.5%. Poly(NVP‐co‐HEMA)–herbicide can release a bioactive compound in aqueous solution at pH = 3, 7 and 10. CONCLUSION: Based on the results of homogeneous hydrolysis, it is argued that the herbicide release rate depends on the pH of the reaction environment. This functional polymer could be employed as a biodegradable material for applications in agrichemical release. Copyright © 2008 Society of Chemical Industry     

HERSCHEL—PACS Bolometer Arrays for Submillimeter Ground-Based Telescopes

The Herschel Space Observatory will carry onboard a new kind of bolometric architecture for the PACS (Photodetector Array Camera and Spectrometer) submillimeter photometer. These new generation CCD-like multiplexed bolometer arrays are buttable and enable the conception of large fully sampled focal planes either for space or for ground-based telescopes. We present here some development for ground-based applications in the context of the ARTEMIS (ARchitecture de bolomètres pour des TElescopes sub-MIllimétriques au Sol) project. We have developed an electro-thermal numerical model that simulates the performances of these semiconducting bolometers under specific ground-based conditions (different wavelengths and background powers for example). This model permits to determine the optimal parameters for each condition and shows that the bolometers can be background limited in each atmospheric transmission window between 200 and 450 microns. We also describe the optical system that provides a high optical efficiency in each submillimeter atmospheric window. Astronomical observations made with a prototype on the APEX telescope are presented.     

Families of automata characterizing context-sensitive languages

In the hierarchy of infinite graph families, rational graphs are defined by rational transducers with labelled final states. This paper proves that their traces are precisely context-sensitive languages and that this result remains true for synchronized rational graphs.Received: 17 December 2003, Published online: 27 December 2004