A numerical model for the dissolution of spherical particles in binary alloys under mixed mode control

A general numerical model is described for the dissolution kinetics of spherical particles in binary systems for any combination of first order reactions at the particle-matrix interface and long distance diffusion within the matrix. The model is applicable to both finite and infinite media and handles both complete and partial particle dissolution. It is shown that interfacial reactions can have a strong effect on the dissolution kinetics, the solute concentration at the particle-matrix interface and the solute concentration profile in the matrix.     

The impact of cleaner processing on nutrient availability in the bleached kraft industry.

The pulp and paper industry has invested heavily over recent years in cleaner processing, to reduce losses and minimise its impact on the environment. Over the past fifteen years, a New Zealand integrated bleached kraft mill has undergone a comprehensive programme of upgrades to increase production, reduce water consumption and streamline its biological treatment process. Whilst the overall discharge of contaminants from the site decreased, the treatment system performance did not show a concurrent improvement as may have been expected. Reduced BOD removal, low dissolved oxygen levels, and poor solids settlability were symptomatic of phosphorus limitation in the aerated lagoon treatment system. The wastewater entering the system was found to be phosphorus limited at a BOD:P ratio of 100:0.2. Mono-ammonium-phosphate was supplemented, at approximately 30 kg P/d, to raise the phosphorus levels to a BOD:P ratio of 100:0.3. Treatment efficiencies improved very quickly after phosphorus dosage, with a 50% reduction in BOD and TSS discharge, a significant increase in dissolved oxygen levels, and improved BOD removal (85% to 93%). This case study demonstrates that whilst more closed operation can result in reduced discharge of organic loads, there may be negative impacts on the availability of nutrients for balanced biological growth.     

Modeling Power Supply Noise in Delay Testing

Excessive power supply noise during test can cause overkill. This article discusses two models for supply noise in delay testing and their application to test compaction. The proposed noise models avoid complicated power network analysis, making them much faster than existing power noise analysis tools. can cause performance degradation and     

Multistage Zeolite Drying for Energy-Efficient Drying

This work discusses the potential of three multistage zeolite drying systems (counter-, co-, and cross-current) with a varying number of stages. The evaluation showed that for 2-4 stages with heat recovery the efficiency of the systems ranges between 80 and 90%. Additionally, by introducing a compressor, the latent heat in the exhaust air from the regenerator is recovered and used to heat the inlet air for an additional drying stage. As a result, for the counter-current drying system and compressor pressure 1.5-2 bar, a maximum energy efficiency of 120% is achieved, which results in halving the energy consumption compared to conventional drying systems.     

Ethernet-based passive optical local-area networks for fiber-to-the-desk application

We introduce optical local-area network (LAN) architectures based on multimode optical fiber and components, short wavelength lasers and detectors, and the widely used fast Ethernet protocol. These architectures are designed to lower the costs associated with passive optical LAN implementation. Further reduction in overall cost is achieved through decreased network downtime, lower maintenance cost, extended geometrical spans, and larger headroom for future capacity increase. These optically transparent networks represent a novel approach for implementing fiber-to-the-desk.     

Structure determination of CaMgGeO4

The crystal structure of CaMgGeO₄ is described. CaMgGeO₄, M_r = 200.9, orthorhombic, Pnam, A = 11.285(5) Å, B = 5.016(2) Å, C = 6.435(2) Å, V = 364.36 ų, Dx = 3.664 Mg/m³.λ(MoK_a = 0.71069 Å, F(000) = 384, room temperature, final R = 0.045 for 1752 observed reflections. The structure is isomorphous with CaMgSiO₄ (monticellite).     

Screening and characterization of microorganisms with glutaryl-7ADCA acylase activity

A screening of microorganisms producing glutaryl-7ADCA acylase, an enzyme able to hydrolyse glutaric acid selectively from glutaryl-3-deacetoxy-7-aminocephalosporanic acid (glutaryl-7ADCA), has been carried out in soil samples. Five microorganisms expressing acylase activity were isolated and classified as Bacillus cereus, Achromobacter xylosooxidans, Bacillus sp., Pseudomonas sp. and Pseudomonas paucimobilis. The screening was carried out by preparing enrichment cultures containing glutaryl-7-ADCA or cephalosporin C as the selective carbon source. Four model compounds (adipoyl-, glutamyl- and glutaryl-p-nitroanilide and glutarylcoumarin), mimicking the glutaryl-7ADCA beta-lactam moiety, were synthesized as substrates suitable for the rapid screening of the microorganisms (2500) isolated from the enrichment cultures. A total of 300 strains were active on the model substrates and only 5 displayed acylase activity on glutaryl-7ADCA. The fermentation parameters, such as pH and inducer concentration, for the optimal acylase expression and acylase specificity towards the model substrates were different for each strain.     

Reply to Comment on “Ewald summation technique for one-dimensional charge distributions”

We explain why the methods in Langridge, Hart and Crampin [Comput. Phys. Commun. 134 (2001) 78] suffice for the evaluation of the lattice sums entering the Madelung matrix describing multipole interactions in systems with one-dimensional translational periodicity.     

Direct finite element design optimisation of the cagelessreluctance synchronous machine

The finite element analysis method is used directly in optimisation algorithms to optimise in multidimensions the design of the cageless reluctance synchronous machine. Two optimisation methods are evaluated to minimise or maximise the function value. These are the direction set method of Powell and the quasi-Newton algorithm. Both methods proved to be successful, with some advantages and disadvantages. Using these methods at a power level below 10 kW, results are given of structures of the reluctance synchronous machine which have been optimised according to specific criteria. Calculated and measured results show that the maximum torque optimum designed reluctance synchronous machine has the advantages of high power density and high efficiency