Linked multicontinuum and crack tensor approach for modeling of coupled geomechanics, fluid flow and transport in fractured rock

In this paper, we present a linked multicontinuum and crack tensor approach for modeling of coupled geomechanics, fluid flow, and solute transport in fractured rock. We used the crack tensor approach to calculate effective block-scale properties, including anisotropic permeability and elastic tensors, as well as multicontinuum properties relevant to fracture-matrix interactions and matrix diffusion. In the modeling, we considered stress dependent properties, through stress-induced changes in fracture apertures, to update permeability and elastic tensors. We evaluated the effectiveness and accuracy of our multicon-tinuum approach by comparing our modeling results with that of three independent discrete fracture network (DFN) models. In two of the three alternative DFN models, solute transport was simulated by particle tracking, an approach very different from the standard solute transport used in our multicon-tinuum modeling. We compared the results for flow and solute transport through a 20 m × 20 m model domain of fractured rock, including detailed comparison of total flow rate, its distribution, and solute breakthrough curves. In our modeling, we divided the 20 m × 20 m model domain into regular blocks, or continuum elements. We selected a model discretization of 40 × 40 elements (having a side length of 0.5 m) that resulted in a fluid-flow rate equivalent to that of the DFN models. Our simulation results were in reasonably good agreement with the alternative DFN models, for both advective dominated transport (under high hydraulic gradient) and matrix-diffusion retarded transport (under low hydraulic gradient). However, we found pronounced numerical dispersion when using larger grid blocks, a problem that could be remediated by the use of a finer numerical grid resolution, while maintaining a larger grid for evaluation of equivalent properties, i.e. a property grid overlapping the numerical grid. Finally, we encountered some difficulties in using our approach when element sizes were so small that only one or a few fractures intersect an element-this is an area of possible improvement that will be pursued in future research.     

Ahiflower oil: A novel non‐GM plant‐based omega‐3+6 source

Ahiflower oil, a novel and proprietary dietary oil with the richest effective combined essential fatty acids from a single non‐GM plant, has been developed agronomically in a unique vertically integrated “soil to oil” model at commercial scale by Nature's Crops International. Ahiflower oil helps resolve a persistent dilemma in sustainable global omega‐3 nutrition from marine sources while dramatically improving dietary omega‐3 EPA conversion from plant sources and while supplying beneficial anti‐inflammatory GLA not found in fish or algal oils. Having achieved key regulatory clearances in the US and EU, Ahiflower oil is launching in the latter half of 2015 in supplements and foods.     

Lignosulfonates: effects on plant growth and survival and migration through the soil profile

The effects of Lignosite^#rm lignosulfonate, a refined lignosulfonate product that is obtained from the sulfite pulping process, on growth and survival of plants were investigated. Following applications of 0, 7500, 15,000 and 22,500 cm³#shm² to 32 plots within a forest plantation, the following were monitored: (1) live aboveground biomass of vascular plants, (2) growth of Douglar fir (Pseudotsuga menziesii) and (3) lignosulfonate migration through the soil profile. Live aboveground biomass of woody vegetation was not affected, and that of herbaceous plants was significantly decreased only at the two greatest application rates. Growth of the Douglas fir trees was not significantly affected. Lignosulfonates disappeared from the soil profile at the same rate regardless of initial concentration. Although it is not practical to use this material as a herbicide in western Washington, land application of lignosulfonates may be environmentally more attractive than traditional disposal methods.     

Structural Response of World Trade Center Buildings 1, 2 and 7 to Impact and Fire Damage

The National Institute of Standards and Technology (NIST) conducted an extensive investigation of the collapse of World Trade Center towers (WTC 1 and WTC 2) and the WTC 7 building. This paper describes the component, subsystem, and global analyses performed for the reconstruction of the structural response of WTC buildings 1, 2, and 7 to impact and fire damage. To illustrate the component and subsystem analyses, the approach taken for simulating the performance of concrete slabs and shear stud connectors in composite floors subject to fire conditions are presented, as well as steel floor framing connections for beams and girders. The development of the global models from the component and subsystem analyses is briefly described, including the sets of input data used to bound the probable conditions of impact and fire damage. The final analysis results that were used to develop the probable collapse hypotheses, and a comparison of the results against observed events, are presented for each building. A review of research activities focused on improving understanding of structural system response to multi-floor fires following the WTC disaster is also provided.     

Multidimensional modeling of biofilm development and fluid dynamics in a hydrogen-based,membrane biofilm reactor (MBfR)

A two-dimensional, particle-based biofilm model coupled with mass transport and computational fluid dynamics was developed to simulate autotrophic denitrification in a spiral-wound membrane biofilm reactor (MBfR), where hydrogen is supplied via hollow-fiber membrane fabric. The spiral-wound configuration consists of alternating layers of plastic spacer net and membrane fabric that create rows of flow channels, with the top and bottom walls comprised of membranes. The transversal filaments of the spacer partially obstruct the channel flow, producing complex mixing and shear patterns that require multidimensional representation. This study investigated the effect of hydrogen and nitrate concentrations, as well as spacer configuration, on biofilm development and denitrification fluxes. The model results indicate that the cavity spacer filaments, which rest on the bottom membranes, cause uneven biofilm growth. Most biofilm resided on the bottom membranes, only in the wake of the filaments where low shear zones formed. In this way, filament configuration may help achieve a desired biofilm thickness. For the conditions tested in this study, the highest nitrate fluxes were attained by minimizing the filament diameter and maximizing the filament spacing. This lowered the shear stress at the top membranes, allowing for more biofilm growth. For the scenarios studied, biomass limitation at the top membranes hindered performance more significantly than diffusion limitation in the thick biofilms at the bottom membranes. The results also highlighted the importance of two-dimensional modeling to capture uneven biofilm growth on a substratum with geometrical complexity.     

Lawyering Landscapes: Lawyers as Constituents of Landscape

Landscape and law cross-influence each other. Legal rules shape landscapes, while landscapes shape the culture from which rules emerge. In describing this interplay, landscape can seem passive, as a canvas on which laws paint visions of society; or active, as a matrix for the creation of law and culture. An alternative view is suggested: landscapes are opportunities for action, fields within which individuals interact with context in a mutually adaptive relationship. Lawyers are specialized constituents of this adaptation. Lawyers' acts and practices help to constitute the adaptations that shape a given landscape. A teaching module in which it was sought to prompt law students to become aware of the adaptive role of lawyering in landscape is described. The results suggest useful theoretical and methodological insights into landscape as a field of human activity, and the need for further study of lawyering as a force in the construction of landscape.     

The relationship between integrated design and construction and safety on construction projects

The occurrence of accidents and injuries continues to be a major problem in construction worldwide. Even though accident statistics have been improving in most markets there are significant areas requiring further attention. The extent of integrated working between designers and constructors may be an instrumental factor. A comparison is undertaken of the accident performance of 55 large construction projects in the UK, with varying levels of design/construction integration as represented by procurement path. Although a statistical relationship between high levels of integration and low levels of accidents was weak, a follow‐up interview study provided strong support, suggesting that a lack of significance was related to the unreliability of the statistics available. The interview study also indicated reasons for this link. A key element in improved safety was seen to be better communications and a more positive relationship between designers and constructors. Further research into designing for safety for all procurement paths is recommended.     

A regional construction R&D evaluation system for China

Expenditure on R&D in China’s construction industry has been relatively low in comparison with many developed countries for a number of years—a situation considered to be a major barrier to the industry’s competitiveness in general and unsatisfactory as regards industry development of the 31 regions involved. A major problem with this is the lack of a sufficiently sophisticated method of objectively evaluating R&D activity in what are quite complex circumstances considering the size and regional differences that exist in this part of the world. A regional construction R&D evaluation system (RCRES) is presented, aimed at rectifying the situation. This is based on 12 indicators drawn from the Chinese Government’s R&D Inventory of Resources in consultation with a small group of experts in the field, and further factor analysed into three groups. From this, the required evaluation is obtained by a simple formula. Examination of the results provides a ranking list of the R&D performance of each of the 31 regions, indicating a general disproportion between coastal and inland regions and highlighting regions receiving special emphasis or currently lacking in development. The understanding on this is vital for the future of China’s construction industry.     

The challenges of creating actionable knowledge: an action research perspective

Academia has a critical role in developing new knowledge which construction industry practitioners need to envision, undertake and sustain successful innovation. The new knowledge produced by academia, however, often does not satisfy the needs of practitioners. This unsatisfactory state of affairs is frequently taken to be the consequence of the cultural, motivational and operational differences between the two communities. Actionable knowledge is presented as a useful concept which can fuse the expectations, contributions and outputs of academia and practitioners. Within this context, action research is argued to be an appropriate methodology to develop successful actionable knowledge. Results from an action research project are given which provide researchers and practitioners greater understanding of the key factors that shape the degree to which action research produces actionable knowledge: change focus, collaboration capabilities and systematic process. The criteria intrinsic to Mode 2 research (Gibbons et al., 1994 Gibbons, M., Limoges, C., Nowotny, H., Schwartz, S., Scott, P. and Trow, M. 1994. The New Production of Knowledge: The Dynamics of Science and Research in Contemporary Societies, London: Sage.  [Google Scholar]) are demonstrated to have utility in evidencing actionable knowledge. The implication for policy is that there is a need to develop and use appropriate actionable knowledge frameworks and measures to design funding calls, and to evaluate research proposals and outputs.