Robust FIPP p-cycles against dual link failures

We propose a new generic flow formulation for Failure-Independent Path-Protecting (FIPP) p-cycles subject to multiple failures. While our new model resembles the decomposition model formulation proposed by Orlowski and Pioro (Networks, 2011) in the case of classical shared path protection, its originality lies in its adaptation to FIPP p-cycles. When adapted to that last pre-configured pre-cross connected protection scheme, the bandwidth sharing constraints must be handled in a different way in order to take care of the sharing along the FIPP p-cycles. It follows that, instead of a polynomial-time solvable pricing problem as in the model of Orlowski and Pioro (Networks, 2011), we end up with a much more complex pricing problem, which has an exponential number of constraints due to some subtour elimination constraints. Consequently, in order to efficiently solve the pricing problem, we consider: (i) a hierarchical decomposition of the original pricing problem; (ii) heuristics in order to go around the large number of constraints in the pricing problem. Performance evaluation is made in the case of FIPP p-cycles subject to dual failures. For small to medium size networks, the proposed model remains fairly scalable for increasing percentages of dual failures, and requires much less bandwidth than p-cycle protection schemes (ratio varies from 2 to 4). For larger networks, heuristics are required in order to keep computing times reasonable. In the particular case of single link failures, it compares very favorably (5 to 10 % of bandwidth saving) to the previously proposed column generation ILP model of Rocha, Jaumard and Stidsen (Telecommun. Syst., 2012).     

On proportional fairness of uplink spectral efficiency in cell‐free massive MIMO systems

This paper is concerned with the proportional fairness (PF) of the spectral efficiency (SE) maximization of uplinks in a cell‐free (CF) massive multiple‐input multiple‐output (MIMO) system in which a large number of single‐antenna access points (APs) connected to a central processing unit (CPU) serve many single‐antenna users. To detect the user signals, the APs use matched filters based on the local channel state information while the CPU deploys receiver filters based on knowledge of channel statistics. We devise the maximization problem of the SE PF, which maximizes the sum of the logarithm of the achievable user rates, as a jointly nonconvex optimization problem of receiver filter coefficients and user power allocation subject to user power constraints. To handle the challenges associated with the nonconvexity of the formulated design problem, we develop an iterative algorithm by alternatively finding optimal filter coefficients at the CPU and transmit powers at the users. While the filter coefficient design is formulated as a generalized eigenvalue problem, the power allocation problem is addressed by a gradient projection (GP) approach. Simulation results show that the SE PF maximization not only offers approximately the achievable sum rates as compared to the sum‐rate maximization but also provides an improved trade‐off between the user rate fairness and the achievable sum rate.     

Ångstrom‐Scale Silver Particles as a Promising Agent for Low‐Toxicity Broad‐Spectrum Potent Anticancer Therapy

Cancer incidence is rising, and the efficacy of current available anticancer agents is limited by severe dose‐limiting toxicities and drug resistance problems. Nanoparticles are heralded as the next frontier in cancer treatment. Here, a pure physical method is used to efficiently fabricate very small silver particles even approaching the Ångstrom (Ång) dimension. Fructose is used as a dispersant and stabilizer to coat the Ång‐scale silver particles (AgÅPs). Functional and mechanistic studies demonstrate that fructose‐coated AgÅPs (F‐AgÅPs) can enter and accumulate in multiple cultured cancer cell lines to induce apoptotic death, whereas most normal cells are resistant to the efficacious dose of F‐AgÅPs; in vivo, intravenous administration of F‐AgÅPs potently inhibits the growth of pancreatic and lung cancer xenografts in nude mice, without inducing notable toxic effects on the healthy tissues. The results suggest the promising potential of F‐AgÅPs as a potent, safe, and broad‐spectrum agent for the cancer treatment.     

Short packet communication in underlay cognitive network assisted by an intelligent reflecting surface

We propose short packet communication in an underlay cognitive radio network assisted by an intelligent reflecting surface (IRS) composed of multiple reconfigurable reflectors. This scheme, called the IRS protocol, operates in only one time slot (TS) using the IRS. The IRS adjusts its phases to give zero received cumulative phase at the secondary destination, thereby enhancing the end-to-end signal-to-noise ratio. The transmitting power of the secondary source is optimized to simultaneously satisfy the multi-interference constraints, hardware limitations, and performance improvement. Simulation and analysis results of the average block error rates (BLERs) show that the performance can be enhanced by installing more reconfigurable reflectors, increasing the blocklength, lowering the number of required primary receivers, or sending fewer information bits. Moreover, the proposed IRS protocol always outperforms underlay relaying protocols using two TSs for data transmission, and achieves the best average BLER at identical transmission distances between the secondary source and secondary destination. The theoretical analyses are confirmed by Monte Carlo simulations.     

Synergistic Enhancement of Luminescent and Ferroelectric Properties through Multi-Clipping of Tetraphenylethenes

Synergistically enhancing luminescent and ferroelectric ( SELF ) properties are observed from a tetraphenylethene ( TP ) substituted with clipping groups ( C ), where the C is consisting of a 4-[3,5-bis-(3-decyloxy-styryl)-styryl]-phenyl ( DOS ) unit. The DOS units of TPCn are self-assembled via intermolecular interaction to clip themselves and induce TP aggregation, as evidenced by clip-induced quenching of emission at DOS units ( E _clip ) accompanied by aggregation-induced emission enhancement of TPs ( E _AIE ). TPC4 demonstrates strong photoluminescence in a dilute chloroform solution and large E_AIE in aqueous (>50%) THF solution. TPCn demonstrates SELF properties in film state, with high quantum yields of photoluminescence (>80%) and ferroelectric switching. Due to the introduction of four clips, TPC4 has a higher remnant polarization ( P _r  =  2.27 µC cm⁻²) at room temperature than TPC1. TPC4 is successfully employed in a light-emitting electrochemical cell to achieve over 1290 cd m⁻² under pulsed current conditions. The TPC4 film on a flexible substrate produced a piezoelectric output voltage of up to 0.13 V and a current density of 1.14 nA cm⁻² upon bending. These results indicate that the side chain clipping and TP aggregation resulted in unprecedented flexible SELF properties in a single compound, offering simultaneous enhancement of electroluminescence, mechanical sensitivity, and energy harvesting capacity.     

Parametric optimization of multichannel rejection filters

The number of channels of a multichannel rejection filter (MRF) has been optimized by the energy and probabilistic criteria. The matrix of MRF coefficients is defined. The paper includes analysis of the gain in signal detection effectiveness, in the presence of interference, as compared to the single-channel rejection filter.     

Impact of the Solvation State of Lead Iodide on Its Two‐Step Conversion to MAPbI3: An In Situ Investigation

Producing high efficiency solar cells without high‐temperature processing or use of additives still remains a challenge with the two‐step process. Here, the solution processing of MAPbI₃ from PbI₂ films in N,N‐dimethylformamide (DMF) is investigated. In‐situ grazing incidence wide‐angle X‐ray scattering (GIWAXS) measurements reveal a sol–gel process involving three PbI₂‐DMF solvate complexes—disordered (P₀) and ordered (P₁, P₂)—prior to PbI₂ formation. When the appropriate solvated state of PbI₂ is exposed to MAI (methylammonium Iodide), it can lead to rapid and complete room temperature conversion into MAPbI₃ with higher quality films and improved solar cell performance. Complementary in‐situ optical reflectance, absorbance, and quartz crystal microbalance with dissipation (QCM‐D) measurements show that dry PbI₂ can take up only one third of the MAI taken up by the solvated‐crystalline P₂ phase of PbI₂, requiring additional annealing and yet still underperforming. The perovskite solar cells fabricated from the ordered P₂ precursor show higher power conversion efficiency (PCE) and reproducibility than devices fabricated from other cases. The average PCE of the solar cells is greatly improved from 13.2(±0.53)% (from annealed PbI₂) to 15.7(±0.35)% (from P₂) reaching up to 16.2%. This work demonstrates the importance of controlling the solvation of PbI₂ as an effective strategy for the growth of high‐quality perovskite films and their application in high efficiency and reproducible solar cells.     

An inspection-maintenance model for systems with multiple competing processes

In some applications, the failure rate of the system depends not only on the time, but also upon the status of the system, such as vibration level, efficiency, number of random shocks on the system, etc., which causes degradation. In this paper, we develop a generalized condition-based maintenance model subject to multiple competing failure processes including two degradation processes, and random shocks. An average long-run maintenance cost rate function is derived based on the expressions for the degradation paths & cumulative shock damage, which are measurable. A geometric sequence is employed to develop the inter-inspection sequence. Upon inspection, one needs to decide whether to perform a maintenance, such as preventive or corrective, or to do nothing. The preventive maintenance thresholds for degradation processes & inspection sequences are the decision variables of the proposed model. We also present an algorithm based on the Nelder-Mead downhill simplex method to calculate the optimum policy that minimizes the average long-run maintenance cost rate. Numerical examples are given to illustrate the results using the optimization algorithm.     

A miniaturized silicon-based ground Ring Guarded patch resonator and filter

A new miniaturized ground ring guided microstrip patch filter developed on the silicon wafer using micromachined technology is reported. The ground shunt can be used to lower the operating frequency up to one-third as compared to the traditional patch resonator. The size of the designed band pass filter operating in 5.17 GHz is only 8.7 mm/spl times/2.9 mm.